[U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

[Derald D. Woods]

On Mon, Mar 07, 2016 at 08:33:33PM -0500, Tom Rini wrote:
> On Mon, Mar 07, 2016 at 06:24:05PM -0600, Derald D. Woods wrote:
> > On Mon, Mar 07, 2016 at 06:36:56PM -0500, Tom Rini wrote:
> > > On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote:
> > > 
> > > > - Add required UBI/UBIFS config definitions
> > > > - Add reasonable MTD partition layout
> > > > - Remove JFFS2 config definitions
> > > > - Drop some CFI verbage and definitions
> > > > - Make comment 'one-liners' truly one line
> > > > - Improve readability and content arrangement
> > > > 
> > > > Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
> > > 
> > > Reviewed-by: Tom Rini <trini at konsulko.com>
> > > 
> > > ... but we shouldn't be adding more extra options, we should be
> > > converting to Kconfig.  Any chance you can find some time to work on
> > > starting to convert some of that over for this board at least?  Thanks!
> > 
> > What is the best example of it being done correctly? For OMAP3, I have
> > an older BeagleBoard Rev. C4 and the AM3517 EXP to work with. I also
> > have a SAMA5D3 xplained, with an Atmel SoC, and the iMX233 OlinuXino
> > MAXI.
> 
> In this case it's not about board, but about options.  CONFIG_NAND needs
> to go away in favour of NAND being an option in
> drivers/mtd/nand/Kconfig, and include/configs/ cleaned out.
> ./tools/moveconfig.py can help here.
> 
> -- 
> Tom

Thanks. That clarifies things a bit. This will nudge me more towards
proper config generation with Kconfig.


-- 
Derald