[U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

[Tom Rini]

On Mon, Mar 07, 2016 at 06:24:05PM -0600, Derald D. Woods wrote:
> On Mon, Mar 07, 2016 at 06:36:56PM -0500, Tom Rini wrote:
> > On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote:
> > 
> > > - Add required UBI/UBIFS config definitions
> > > - Add reasonable MTD partition layout
> > > - Remove JFFS2 config definitions
> > > - Drop some CFI verbage and definitions
> > > - Make comment 'one-liners' truly one line
> > > - Improve readability and content arrangement
> > > 
> > > Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
> > 
> > Reviewed-by: Tom Rini <trini at konsulko.com>
> > 
> > ... but we shouldn't be adding more extra options, we should be
> > converting to Kconfig.  Any chance you can find some time to work on
> > starting to convert some of that over for this board at least?  Thanks!
> 
> What is the best example of it being done correctly? For OMAP3, I have
> an older BeagleBoard Rev. C4 and the AM3517 EXP to work with. I also
> have a SAMA5D3 xplained, with an Atmel SoC, and the iMX233 OlinuXino
> MAXI.

In this case it's not about board, but about options.  CONFIG_NAND needs
to go away in favour of NAND being an option in
drivers/mtd/nand/Kconfig, and include/configs/ cleaned out.
./tools/moveconfig.py can help here.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160307/457adff2/attachment.sig>