[U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

[Adam Ford]

On Mar 7, 2016 6:24 PM, "Derald D. Woods" <woods.technical at gmail.com> wrote:
>
> On Mon, Mar 07, 2016 at 06:36:56PM -0500, Tom Rini wrote:
> > On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote:
> >
> > > - Add required UBI/UBIFS config definitions
> > > - Add reasonable MTD partition layout
> > > - Remove JFFS2 config definitions
> > > - Drop some CFI verbage and definitions
> > > - Make comment 'one-liners' truly one line
> > > - Improve readability and content arrangement
> > >
> > > Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
> >
> > Reviewed-by: Tom Rini <trini at konsulko.com>
> >
> > ... but we shouldn't be adding more extra options, we should be
> > converting to Kconfig.  Any chance you can find some time to work on
> > starting to convert some of that over for this board at least?  Thanks!
> >
> > --
> > Tom
>
>
> What is the best example of it being done correctly? For OMAP3, I have
> an older BeagleBoard Rev. C4 and the AM3517 EXP to work with. I also
> have a SAMA5D3 xplained, with an Atmel SoC, and the iMX233 OlinuXino
> MAXI.
>
>
I know I am behind on helping with these boards, but moving out of my house
takes a lot of time, but I would like to help port any/all Logic PD boards
that TI doesn't do.

Adam

> --
> Derald
>