[U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

[Derald D. Woods]

On Mon, Mar 07, 2016 at 06:36:56PM -0500, Tom Rini wrote:
> On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote:
> 
> > - Add required UBI/UBIFS config definitions
> > - Add reasonable MTD partition layout
> > - Remove JFFS2 config definitions
> > - Drop some CFI verbage and definitions
> > - Make comment 'one-liners' truly one line
> > - Improve readability and content arrangement
> > 
> > Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
> 
> Reviewed-by: Tom Rini <trini at konsulko.com>
> 
> ... but we shouldn't be adding more extra options, we should be
> converting to Kconfig.  Any chance you can find some time to work on
> starting to convert some of that over for this board at least?  Thanks!
> 
> -- 
> Tom


What is the best example of it being done correctly? For OMAP3, I have
an older BeagleBoard Rev. C4 and the AM3517 EXP to work with. I also
have a SAMA5D3 xplained, with an Atmel SoC, and the iMX233 OlinuXino
MAXI.


--
Derald