[U-Boot] [PATCH v3] armv8: LS2080A: Consolidate LS2080A and LS2085A
York Sun
york.sun at nxp.com
Thu Mar 31 20:15:23 CEST 2016
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.
Signed-off-by: York Sun <york.sun at nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
Changes in v3:
Fix checking AIOP. Tested on LS2080ARDB.
Changes in v2:
Add checking for SVR before starting AIOP
Drop RFC from subject
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 ---
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 9 ++++---
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 6 ++++-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 ++++++++++++++++++-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +--
arch/arm/include/asm/arch-fsl-layerscape/config.h | 9 ++-----
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 2 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 +++
board/freescale/ls2080a/ddr.c | 27 +++++++++++---------
board/freescale/ls2080a/ls2080a.c | 2 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 --
board/freescale/ls2080aqds/ddr.c | 27 +++++++++++---------
board/freescale/ls2080aqds/ls2080aqds.c | 2 +-
board/freescale/ls2080ardb/MAINTAINERS | 2 --
board/freescale/ls2080ardb/ddr.c | 27 +++++++++++---------
board/freescale/ls2080ardb/ls2080ardb.c | 2 +-
configs/ls2085aqds_defconfig | 19 --------------
configs/ls2085aqds_nand_defconfig | 14 ----------
configs/ls2085ardb_defconfig | 19 --------------
configs/ls2085ardb_nand_defconfig | 14 ----------
drivers/net/fsl-mc/mc.c | 4 +++
drivers/net/ldpaa_eth/Makefile | 1 -
include/configs/ls2080a_common.h | 7 +----
include/configs/ls2080a_emu.h | 7 -----
include/configs/ls2080a_simu.h | 7 -----
include/linux/usb/xhci-fsl.h | 2 +-
28 files changed, 100 insertions(+), 152 deletions(-)
delete mode 100644 configs/ls2085aqds_defconfig
delete mode 100644 configs/ls2085aqds_nand_defconfig
delete mode 100644 configs/ls2085ardb_defconfig
delete mode 100644 configs/ls2085ardb_nand_defconfig
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index cce7405..5f86ef9 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -25,10 +25,6 @@ ifneq ($(CONFIG_LS2080A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
endif
-ifneq ($(CONFIG_LS2085A),)
-obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
-endif
-
ifneq ($(CONFIG_LS1043A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 4b9e209..d939900 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -538,12 +538,12 @@ int print_cpuinfo(void)
struct sys_info sysinfo;
char buf[32];
unsigned int i, core;
- u32 type, rcw;
+ u32 type, rcw, svr = gur_in32(&gur->svr);
puts("SoC: ");
cpu_name(buf);
- printf(" %s (0x%x)\n", buf, gur_in32(&gur->svr));
+ printf(" %s (0x%x)\n", buf, svr);
memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
get_sys_info(&sysinfo);
puts("Clock Configuration:");
@@ -564,7 +564,10 @@ int print_cpuinfo(void)
printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
#endif
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
+ if (soc_has_dp_ddr()) {
+ printf(" DP-DDR: %-4s MT/s",
+ strmhz(buf, sysinfo.freq_ddrbus2));
+ }
#endif
puts("\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 81cf470..d580a43 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -97,9 +97,13 @@ void get_sys_info(struct sys_info *sys_info)
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
+ if (soc_has_dp_ddr()) {
+ sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+ } else {
+ sys_info->freq_ddrbus2 = 0;
+ }
#endif
for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 9c69ed1..04831ca 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -20,7 +20,7 @@ ENTRY(lowlevel_init)
#ifdef CONFIG_FSL_LSCH3
/* Set Wuo bit for RN-I 20 */
-#if defined(CONFIG_LS2085A) || defined (CONFIG_LS2080A)
+#ifdef CONFIG_LS2080A
ldr x0, =CCI_AUX_CONTROL_BASE(20)
ldr x1, =0x00000010
bl ccn504_set_aux
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 213ce3a..f3ef99b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -18,7 +18,31 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+bool soc_has_dp_ddr(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 svr = gur_in32(&gur->svr);
+
+ /* LS2085A has DP_DDR */
+ if (SVR_SOC_VER(svr) == SVR_LS2085)
+ return true;
+
+ return false;
+}
+
+bool soc_has_aiop(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 svr = gur_in32(&gur->svr);
+
+ /* LS2085A has AIOP */
+ if (SVR_SOC_VER(svr) == SVR_LS2085)
+ return true;
+
+ return false;
+}
+
+#ifdef CONFIG_LS2080A
/*
* This erratum requires setting a value to eddrtqcr1 to
* optimal the DDR performance.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index f434c44..c1229c8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -46,7 +46,7 @@ void board_init_f(ulong dummy)
{
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
arch_cpu_init();
#endif
#ifdef CONFIG_FSL_IFC
@@ -54,7 +54,7 @@ void board_init_f(ulong dummy)
#endif
board_early_init_f();
timer_init();
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
env_init();
#endif
get_clocks();
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index bfaece2..6ca4bc2 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -23,16 +23,11 @@
*/
#define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
#define CONFIG_MAX_CPUS 16
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
-#ifdef CONFIG_LS2080A
-#define CONFIG_NUM_DDR_CONTROLLERS 2
-#endif
-#ifdef CONFIG_LS2085A
#define CONFIG_NUM_DDR_CONTROLLERS 3
-#define CONFIG_SYS_FSL_HAS_DP_DDR
-#endif
+#define CONFIG_SYS_FSL_HAS_DP_DDR /* Runtime check to confirm */
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 }
#define SRDS_MAX_LANES 8
#define CONFIG_SYS_FSL_SRDS_1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 93bbda3..71c428f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -203,7 +203,7 @@ static const struct sys_mmu_table final_mmu_table[] = {
{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE,
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index d1fbde7..f71c2c1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
#include <config.h>
-#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_LS2080A
enum srds_prtcl {
NONE = 0,
PCIE1,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index ea78e15..007f8b6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -93,4 +93,7 @@ void cpu_name(char *name);
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
void erratum_a009635(void);
#endif
+
+bool soc_has_dp_ddr(void);
+bool soc_has_aiop(void);
#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index 56c5d96..1827ddc 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -7,6 +7,7 @@
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@ void dram_init_banksize(void)
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
- /* initialize DP-DDR here */
- puts("DP-DDR: ");
- /*
- * DDR controller use 0 as the base address for binding.
- * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
- */
- dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ if (soc_has_dp_ddr()) {
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
CONFIG_DP_DDR_CTRL,
CONFIG_DP_DDR_NUM_CTRLS,
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
NULL, NULL, NULL);
- if (dp_ddr_size) {
- gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
- gd->bd->bi_dram[2].size = dp_ddr_size;
- } else {
- puts("Not detected");
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
}
#endif
}
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 7bce8b0..e04c02e 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -42,7 +42,7 @@ void detail_board_ddr_info(void)
print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
print_ddr_info(0);
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- if (gd->bd->bi_dram[2].size) {
+ if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
puts("\nDP-DDR ");
print_size(gd->bd->bi_dram[2].size, "");
print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 6f99ad0..3d82482 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -6,5 +6,3 @@ F: board/freescale/ls2080a/ls2080aqds.c
F: include/configs/ls2080aqds.h
F: configs/ls2080aqds_defconfig
F: configs/ls2080aqds_nand_defconfig
-F: configs/ls2085aqds_defconfig
-F: configs/ls2085aqds_nand_defconfig
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c
index 9fb5e11..fcb0366 100644
--- a/board/freescale/ls2080aqds/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -7,6 +7,7 @@
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@ void dram_init_banksize(void)
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
- /* initialize DP-DDR here */
- puts("DP-DDR: ");
- /*
- * DDR controller use 0 as the base address for binding.
- * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
- */
- dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ if (soc_has_dp_ddr()) {
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
CONFIG_DP_DDR_CTRL,
CONFIG_DP_DDR_NUM_CTRLS,
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
NULL, NULL, NULL);
- if (dp_ddr_size) {
- gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
- gd->bd->bi_dram[2].size = dp_ddr_size;
- } else {
- puts("Not detected");
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
}
#endif
}
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index aa256a2..ed9688d 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -227,7 +227,7 @@ void detail_board_ddr_info(void)
print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
print_ddr_info(0);
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- if (gd->bd->bi_dram[2].size) {
+ if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
puts("\nDP-DDR ");
print_size(gd->bd->bi_dram[2].size, "");
print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index c9f3459..aac8110 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -6,5 +6,3 @@ F: board/freescale/ls2080a/ls2080ardb.c
F: include/configs/ls2080ardb.h
F: configs/ls2080ardb_defconfig
F: configs/ls2080ardb_nand_defconfig
-F: configs/ls2085ardb_defconfig
-F: configs/ls2085ardb_nand_defconfig
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index 6c19173..a04d21b 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -7,6 +7,7 @@
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
+#include <asm/arch/soc.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -201,22 +202,24 @@ void dram_init_banksize(void)
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
- /* initialize DP-DDR here */
- puts("DP-DDR: ");
- /*
- * DDR controller use 0 as the base address for binding.
- * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
- */
- dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ if (soc_has_dp_ddr()) {
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
CONFIG_DP_DDR_CTRL,
CONFIG_DP_DDR_NUM_CTRLS,
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
NULL, NULL, NULL);
- if (dp_ddr_size) {
- gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
- gd->bd->bi_dram[2].size = dp_ddr_size;
- } else {
- puts("Not detected");
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
}
#endif
}
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 12638df..028654c 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -197,7 +197,7 @@ void detail_board_ddr_info(void)
print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
print_ddr_info(0);
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
- if (gd->bd->bi_dram[2].size) {
+ if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
puts("\nDP-DDR ");
print_size(gd->bd->bi_dram[2].size, "");
print_ddr_info(CONFIG_DP_DDR_CTRL);
diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig
deleted file mode 100644
index a5c8388..0000000
--- a/configs/ls2085aqds_defconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080AQDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig
deleted file mode 100644
index d355c9a..0000000
--- a/configs/ls2085aqds_nand_defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080AQDS=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig
deleted file mode 100644
index fe46dbc..0000000
--- a/configs/ls2085ardb_defconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080ARDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_OF_CONTROL=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_FSL_DSPI=y
diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig
deleted file mode 100644
index 5fb0cf6..0000000
--- a/configs/ls2085ardb_nand_defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080ARDB=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A"
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index f83bd0c..ac24901 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -363,6 +363,9 @@ static int load_mc_aiop_img(u64 aiop_fw_addr)
void *aiop_img;
#endif
+ /* Check if AIOP is available */
+ if (!soc_has_aiop())
+ return -ENODEV;
/*
* Load the MC AIOP image in the MC private DRAM block:
*/
@@ -1235,6 +1238,7 @@ static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
aiop_fw_addr = simple_strtoull(argv[3], NULL,
16);
+ /* if SoC doesn't have AIOP, err = -ENODEV */
err = load_mc_aiop_img(aiop_fw_addr);
if (!err)
printf("fsl-mc: AIOP FW applied\n");
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 74c4916..5587aa6 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -7,4 +7,3 @@
obj-y += ldpaa_wriop.o
obj-y += ldpaa_eth.o
obj-$(CONFIG_LS2080A) += ls2080a.o
-obj-$(CONFIG_LS2085A) += ls2080a.o
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 13ce349..57e2a29 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -171,10 +171,9 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
-#ifdef CONFIG_LS2085A
+/* For LS2085A */
#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
-#endif
/*
* Carve out a DDR region which will not be used by u-boot/Linux
@@ -198,10 +197,6 @@ unsigned long long get_qixis_addr(void);
#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
#endif
-#ifdef CONFIG_LS2085A
-#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie"
-#endif
-
#define CONFIG_SYS_PCI_64BIT
#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h
index 534ebb6..f4ace85 100644
--- a/include/configs/ls2080a_emu.h
+++ b/include/configs/ls2080a_emu.h
@@ -9,15 +9,8 @@
#include "ls2080a_common.h"
-#ifdef CONFIG_LS2080A
#define CONFIG_IDENT_STRING " LS2080A-EMU"
#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-EMU"
-#endif
-
-#ifdef CONFIG_LS2085A
-#define CONFIG_IDENT_STRING " LS2085A-EMU"
-#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-EMU"
-#endif
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 133333333
diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h
index 2c2ce7b..0dbe95f 100644
--- a/include/configs/ls2080a_simu.h
+++ b/include/configs/ls2080a_simu.h
@@ -9,15 +9,8 @@
#include "ls2080a_common.h"
-#ifdef CONFIG_LS2080A
#define CONFIG_IDENT_STRING " LS2080A-SIMU"
#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-SIMU"
-#endif
-
-#ifdef CONFIG_LS2085A
-#define CONFIG_IDENT_STRING " LS2085A-SIMU"
-#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-SIMU"
-#endif
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 133333333
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index e922e32..c5e42e6 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -55,7 +55,7 @@ struct fsl_xhci {
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#elif defined(CONFIG_LS2080A)
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
--
1.7.9.5
More information about the U-Boot
mailing list