[U-Boot] [PATCH] eth: dtsec: fix TBI ANA setting bug in dtsec_configure_serdes()

york sun york.sun at nxp.com
Tue Mar 22 19:57:19 CET 2016


On 12/13/2015 11:07 PM, Xie Shaohui-B21989 wrote:
> Hi,
> 
> As mentioned, the value 0x4001 is the desired one in AN3869 for SGMII setting,
> quoted as below:
> " Program TBI ANA = 0x4001 (SGMII) or 0x01A0 (1000BASE-X). "
> 
> I think the AN3869 should be followed, change SGMII setting just because it 
> worked on P2041rdb is not a good reason.
> 
> To distinguish SGMII from other connections should be the way to program TBI ANA,
> This is also follow the AN3869.
> 
> Best Regards, 
> Shaohui Xie
> 
> 

Looks like this patch is dead. I will mark is NA.

York




More information about the U-Boot mailing list