[U-Boot] [PATCH 40/69] x86: Record the CPU details when starting each core

[Simon Glass]

As each core starts up, record its microcode version and CPU ID so these can
be presented with the 'cpu detail' command.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/intel_common/microcode_intel.c | 2 +-
 arch/x86/cpu/mp_init.c                      | 5 +++++
 arch/x86/include/asm/microcode.h            | 9 +++++++++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/x86/cpu/intel_common/microcode_intel.c b/arch/x86/cpu/intel_common/microcode_intel.c
index 3054fab..26b1316 100644
--- a/arch/x86/cpu/intel_common/microcode_intel.c
+++ b/arch/x86/cpu/intel_common/microcode_intel.c
@@ -64,7 +64,7 @@ static int microcode_decode_node(const void *blob, int node,
 	return 0;
 }
 
-static inline uint32_t microcode_read_rev(void)
+int microcode_read_rev(void)
 {
 	/*
 	 * Some Intel CPUs can be very finicky about the CPUID sequence used.
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index ca47e9e..94ddbbb 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -15,6 +15,7 @@
 #include <asm/cpu.h>
 #include <asm/interrupt.h>
 #include <asm/lapic.h>
+#include <asm/microcode.h>
 #include <asm/mp.h>
 #include <asm/msr.h>
 #include <asm/mtrr.h>
@@ -560,12 +561,16 @@ int mp_init(struct mp_params *p)
 
 int mp_init_cpu(struct udevice *cpu, void *unused)
 {
+	struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
+
 	/*
 	 * Multiple APs are brought up simultaneously and they may get the same
 	 * seq num in the uclass_resolve_seq() during device_probe(). To avoid
 	 * this, set req_seq to the reg number in the device tree in advance.
 	 */
 	cpu->req_seq = fdtdec_get_int(gd->fdt_blob, cpu->of_offset, "reg", -1);
+	plat->ucode_version = microcode_read_rev();
+	plat->device_id = cpuid_eax(1);
 
 	return device_probe(cpu);
 }
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 67f32cc..0478935 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -18,6 +18,15 @@
  * not updates were found, -EINVAL if an update was invalid
  */
 int microcode_update_intel(void);
+
+/**
+ * microcode_read_rev() - Read the microcode version
+ *
+ * This reads the microcode version of the currently running CPU
+ *
+ * @return microcode version number
+ */
+int microcode_read_rev(void);
 #endif /* __ASSEMBLY__ */
 
 #endif
-- 
2.7.0.rc3.207.g0ac5344