[U-Boot] Newbie SPL question for socfpga_sockit
George Broz
brozgeo at gmail.com
Wed Mar 9 17:06:59 CET 2016
On 9 March 2016 at 02:55, Marek Vasut <marex at denx.de> wrote:
> On 03/09/2016 02:42 AM, Phil Reid wrote:
>> G'day George,
>>
>> On 3/03/2016 10:57 PM, George Broz wrote:
>>> On 2 March 2016 at 23:11, Phil Reid <preid at electromag.com.au> wrote:
>>>> On 3/03/2016 2:49 PM, George Broz wrote:
>>>>>
>>>>> On 1 March 2016 at 19:49, Phil Reid <preid at electromag.com.au> wrote:
>>>>>>
>>>>>> On 2/03/2016 10:40 AM, George Broz wrote:
>>>>>>
>>>>>>> Sorry for the delayed response - got called away, but am back to this
>>>>>>> now. I patched
>>>>>>> socfpga_common.h and re-built the project. I picked up
>>>>>>> spl/u-boot-spl-dtb.sfp and
>>>>>>> u-boot-dtb.img and transferred them to the SD card with:
>>>>>>>
>>>>>>> dd if=u-boot-spl-dtb.sfp of=/dev/sdf3 bs=64k seek=0
>>>>>>> dd if=u-boot-dtb.img of=/dev/sdf3 bs=64k seek=4
>>>>>>>
>>>>>>> Tried this with both the original DT set (socfpga.dtsi,
>>>>>>> socfpga_cyclone.dtsi,
>>>>>>> socfpga_cyclone5_sockit.dts) that came with the u-boot v2016.01
>>>>>>> download
>>>>>>> and
>>>>>>> also an Altera-patched DT set that I've used to boot into Linux
>>>>>>> numerous
>>>>>>> times.
>>>>>>>
>>>>>>> When I start up the board I get:
>>>>>>>
>>>>>>> U-Boot SPL 2016.01 (Mar 01 2016 - 17:28:14)
>>>>>>> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
>>>>>>> drivers/ddr/altera/sequencer.c: CALIBRATION FAILED
>>>>>>> drivers/ddr/altera/sequencer.c: Calibration complete
>>>>>>> SDRAM calibration failed.
>>>>>>> ### ERROR ### Please RESET the board ###
>>>>>>>
>>>>>>> I'm not a Quartus user, so I haven't done anything with the
>>>>>>> qts-filter.sh script you
>>>>>>> mentioned. Do I need to? I don't have any custom FPGA logic - it's
>>>>>>> just the Terasic
>>>>>>> board out of the box.
>>>>>>>
>>>>>>> Thanks for any help!
>>>>>>>
>>>>>>
>>>>>> Even without the custom FPGA logic the files generated from
>>>>>> qts-filter.sh
>>>>>> need to match your board.
>>>>>> Sets up PLL and SDRAM parameters.
>>>>>> I'm not familiar with the Terasic dev board ( I do have the altera
>>>>>> devkit,
>>>>>> but haven't used it for awhile).
>>>>>> I'd hope the files in the git repo are correct for your board.
>>>>>> Without the corresponding qsys project it's hard to be sure.
>>>>>>
>>>>> Hi Phil,
>>>>>
>>>>> So as my next attempt, there was a Quartus/Qsys example that came
>>>>> with the Terasic board (specific to my Rev. of the board).
>>>>>
>>>>> * I took the contents of the 'handoff folder', .sof, and .sopcinfo
>>>>> file.
>>>>> * launched an "Embedded Command Shell" from EDS 15.0 and then the BSP
>>>>> editor GUI
>>>>> * pointed the BSP editor to the "handoff folder", and hit "Generate"
>>>>> to produce iocsr, pinmux, pll, etc. files
>>>>> * applied qts-filter.sh to these files, the output of which I then
>>>>> dropped into the u-boot source @ ../board/terasic/sockit/qts
>>>>> * rebuilt uboot spl & image, but got a similar result:
>>>>>
>>>>> U-Boot SPL 2016.01 (Mar 02 2016 - 22:13:31)
>>>>> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
>>>>> drivers/ddr/altera/sequencer.c: CALIBRATION FAILED
>>>>> drivers/ddr/altera/sequencer.c: Calibration complete
>>>>> SDRAM calibration failed.
>>>>> ### ERROR ### Please RESET the board ###
>>>>>
>>>>> Except now it repeats four times, whereas before it only printed out
>>>>> once.
>>>>>
>>>>> It that essentially the correct procedure? Is it now a matter of
>>>>> looking through
>>>>> the include files that where generated by qts-filter.sh to find a
>>>>> setting that is "off"?
>>>>>
>>>>> (BTW - my first attempt was to use EDS 13.0, but that resulted in
>>>>> several undefined macros when it
>>>>> came time to compile u-boot with the qts-filter-generated code. How
>>>>> does one know which tool version to use?)
>>>>>
>>>>
>>>> What does a diff of the new files show compared to the ones in uboot.
>>>
>>> Here's two of them...
>>>
>>> ---
>>> /home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/sdram_config.h.orig
>>>
>>> +++
>>> /home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/sdram_config.h
>>>
>>>
>>> @@ -33,10 +33,10 @@
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 7
>>> -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6
>>> -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 12
>>> -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 104
>>> -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 4
>>> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 7
>>> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 15
>>> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 120
>>> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 3
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 3120
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6
>>>
>>> @@ -46,12 +46,12 @@
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20
>>> -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 4
>>> +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 3
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3
>>> #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512
>>> #define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0
>>> #define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0
>>> -#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x1FF
>>> +#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0
>>> #define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3
>>> #define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0
>>> #define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8
>>>
>>> @@ -147,7 +147,7 @@
>>> #define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0
>>> #define MAX_LATENCY_COUNT_WIDTH 5
>>> #define READ_VALID_FIFO_SIZE 16
>>> -#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048d
>>> +#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048c
>>> #define RW_MGR_MEM_ADDRESS_MIRRORING 0
>>> #define RW_MGR_MEM_DATA_MASK_WIDTH 4
>>> #define RW_MGR_MEM_DATA_WIDTH 32
>>>
>>> @@ -168,19 +168,20 @@
>>>
>>> #define TRESET_CNTR2_VAL 10
>>> /* Sequencer ac_rom_init configuration */
>>> -const u32 ac_rom_init[] = {
>>> +const u32 ac_rom_init[] =
>>> +{
>>> 0x20700000,
>>> 0x20780000,
>>> 0x10080431,
>>> 0x10080530,
>>> 0x10090044,
>>> - 0x100a0008,
>>> + 0x100a0010,
>>> 0x100b0000,
>>> 0x10380400,
>>> 0x10080449,
>>> 0x100804c8,
>>> 0x100a0024,
>>> - 0x10090010,
>>> + 0x10090008,
>>> 0x100b0000,
>>> 0x30780000,
>>> 0x38780000,
>>>
>>> @@ -208,7 +209,8 @@
>>> };
>>>
>>>
>>> /* Sequencer inst_rom_init configuration */
>>> -const u32 inst_rom_init[] = {
>>> +const u32 inst_rom_init[] =
>>> +{
>>> 0x80000,
>>> 0x80680,
>>> 0x8180,
>>>
>>> ---
>>> /home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/pll_config.h.orig
>>>
>>> +++
>>> /home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/pll_config.h
>>>
>>> @@ -16,7 +16,7 @@
>>> #define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
>>> #define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 4
>>> #define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
>>> -#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 14
>>> +#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 18
>>> #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
>>> #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
>>> #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
>>>
>>>
>>>> I'm using the Quartus 15.0 tool chain at the moment.
>>>> Turning on debugging in drivers/ddr/altera/sequencer.c may help.
>>>>
>>>
>>> Setting DLEVEL = 2 yields:
>>>
>>> U-Boot SPL 2016.01 (Mar 03 2016 - 06:28:33)
>>> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
>>> find_vfifo_failing_read:1519: vfifo 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> find_vfifo_failing_read:1519: vfifo 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1864 p: ptap=4
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1877 p/d: ptap=4 dtap=7
>>> end=16399
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1887 found range
>>> [14003,16399]
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1895 calculate
>>> dtaps_per_ptap for tracking
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1906 backedup phase only:
>>> p=3rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1919 find passing read
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1927 find failing read
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
>>> rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1948 dtaps_per_ptap=21 -
>>> 8 = 13work_bgn=14003 work_end=16399 work_mid=15201
>>> vfifo ptap delay 2496
>>> new work_mid 225
>>> new p 0, tmp_delay=0
>>> new d 9, tmp_delay=225
>>> find_dqs_en_phase: center
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
>>> sdr_find_window_center:1779 center: found: ptap=0 dtap=9
>>> rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0) => 1
>>> search_stop_check:2006 center(left): dtap=0 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=1 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=2 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=3 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=4 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=5 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=6 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=7 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=8 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=9 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=10 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=11 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=12 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=13 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=14 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=15 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (187 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=16 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (179 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=17 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (19 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=18 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (17 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=19 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (16 != 0)
>>> => 1
>>> search_stop_check:2006 center(left): dtap=20 => 255 == 255 &&
>>> 0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) =>
>>> 0
>>> search_stop_check:2006 center(left): dtap=21 => 255 == 255 &&à
>>>
>>> Will try to make sense of these today...
>>>
>>> Any insights welcome!
>>>
>>
>> Any success.
>>
>> You've reached the limits of my knowledge.
>> The diff shows that there are differences in config.
>> Failure of Memory Calibration has always been my biggest fear with
>> hardware design.
>>
>> Interesting that the 2013.01 build from the Quartus tools works.
>> But the 2016.01 using the same qts generated files does not.
>> Which would suggest there is something amiss in the code.
>>
>> Is there similar debug statements in the 2013.01 code?
>
> There is debug(), which you can enable by adding #define DEBUG at the
> beginning of drivers/ddr/altera/*.c . The other way of tracking down
> this bug would be to rig the writel()/readl() calls and check what
> values they use compared to the original altera code.
Thanks, Phil. I will see what the 2013.01 debug produces. But below is
what I see if I add DEBUG to the 2016.03-rc3 code.
Marek -
The marking on my DDR parts is 4NE77 D9PXV which translates to
Micron part# MT41K256M16HA-125:E. I was looking at the data sheet
to see if I could further manually relax some of the settings in
sdram_config.h. I was also wondering what DDR parts you have on your
boards. Given that your two Rev. D boards work fine, I'm beginning to
think mine is defective and I'd be better off to get a new one.
Best regards,
--George Broz
U-Boot SPL 2016.03-rc3 (Mar 08 2016 - 15:46:07)
scc_mgr_initialize:281: Clearing SCC RFILE index 0
scc_mgr_initialize:281: Clearing SCC RFILE index 1
scc_mgr_initialize:281: Clearing SCC RFILE index 2
scc_mgr_initialize:281: Clearing SCC RFILE index 3
scc_mgr_initialize:281: Clearing SCC RFILE index 4
scc_mgr_initialize:281: Clearing SCC RFILE index 5
scc_mgr_initialize:281: Clearing SCC RFILE index 6
scc_mgr_initialize:281: Clearing SCC RFILE index 7
scc_mgr_initialize:281: Clearing SCC RFILE index 8
scc_mgr_initialize:281: Clearing SCC RFILE index 9
scc_mgr_initialize:281: Clearing SCC RFILE index 10
scc_mgr_initialize:281: Clearing SCC RFILE index 11
scc_mgr_initialize:281: Clearing SCC RFILE index 12
scc_mgr_initialize:281: Clearing SCC RFILE index 13
scc_mgr_initialize:281: Clearing SCC RFILE index 14
scc_mgr_initialize:281: Clearing SCC RFILE index 15
drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
DDR3 FULL_RATE ranks=1 cs/dimm=1 dq/dqs=8,8 vg/dqs=1,1 dqs=5,5 dq=40
dm=5 ptap_delay=312 dtap_delay=25 dtap_dqsen_delay=25, dll=8max
values: en_p=7 dqdqs_p=0 en_d=31 dqs_in_d=31 io_in_d=31 io_out1_d=31
io_out2_d=0 dqs_in_reserve=4 dqs_out_reserve=6
scc_mgr_set_hhp_extras:477 Setting HHP Extras
scc_mgr_set_hhp_extras:480 Done Setting HHP Extras
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=0 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(0,ALL)
=> (255 == 255) => 0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=0 p=0 d=0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=1 p=1 d=4
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=2 p=2 d=8
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=3 p=3 d=12
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=4 p=4 d=16
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=5 p=5 d=20
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=6 p=6 d=24
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=0 r=0 i=7 p=7 d=28
rw_mgr_mem_calibrate_dqs_enable_calibration:2607: g=0 found=1;
Reseting delay chain to zero
get_window_mid_index:2288 vfifo_center: *mid_min=-5 (index=3)
vfifo_center: new mid_min=-5 new_dqs=9
vfifo_center: start_dqs=4 start_dqs_en=-1 new_dqs=9 mid_min=-5
get_window_mid_index:2288 vfifo_center: *mid_min=2 (index=6)
rw_mgr_mem_calibrate_writes_center:3005 write_center: start_dqs=6
new_dqs=6 mid_min=0
get_window_mid_index:2288 vfifo_center: *mid_min=0 (index=3)
vfifo_center: new mid_min=0 new_dqs=9
vfifo_center: start_dqs=9 start_dqs_en=-1 new_dqs=9 mid_min=0
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=1 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(1,ALL)
=> (255 == 255) => 0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=0 p=0 d=0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=1 p=1 d=4
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=2 p=2 d=8
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=3 p=3 d=12
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=4 p=4 d=16
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=5 p=5 d=20
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=6 p=6 d=24
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=1 r=0 i=7 p=7 d=28
rw_mgr_mem_calibrate_dqs_enable_calibration:2607: g=1 found=1;
Reseting delay chain to zero
get_window_mid_index:2288 vfifo_center: *mid_min=-4 (index=3)
vfifo_center: new mid_min=-4 new_dqs=8
vfifo_center: start_dqs=4 start_dqs_en=-1 new_dqs=8 mid_min=-4
get_window_mid_index:2288 vfifo_center: *mid_min=2 (index=2)
rw_mgr_mem_calibrate_writes_center:3005 write_center: start_dqs=6
new_dqs=6 mid_min=0
get_window_mid_index:2288 vfifo_center: *mid_min=-1 (index=3)
vfifo_center: new mid_min=-1 new_dqs=9
vfifo_center: start_dqs=8 start_dqs_en=-1 new_dqs=9 mid_min=-1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=2 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(2,ALL)
=> (255 == 255) => 0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=0 p=0 d=0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=1 p=1 d=4
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=2 p=2 d=8
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=3 p=3 d=12
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=4 p=4 d=16
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=5 p=5 d=20
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=6 p=6 d=24
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=2 r=0 i=7 p=7 d=28
rw_mgr_mem_calibrate_dqs_enable_calibration:2607: g=2 found=1;
Reseting delay chain to zero
get_window_mid_index:2288 vfifo_center: *mid_min=-3 (index=3)
vfifo_center: new mid_min=-3 new_dqs=7
vfifo_center: start_dqs=4 start_dqs_en=-1 new_dqs=7 mid_min=-3
get_window_mid_index:2288 vfifo_center: *mid_min=2 (index=2)
rw_mgr_mem_calibrate_writes_center:3005 write_center: start_dqs=6
new_dqs=6 mid_min=0
get_window_mid_index:2288 vfifo_center: *mid_min=-1 (index=7)
vfifo_center: new mid_min=-1 new_dqs=8
vfifo_center: start_dqs=7 start_dqs_en=-1 new_dqs=8 mid_min=-1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=3 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(3,ALL)
=> (255 == 255) => 0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=0 p=0 d=0
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=1 p=1 d=4
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=2 p=2 d=8
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=3 p=3 d=12
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=4 p=4 d=16
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=5 p=5 d=20
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=6 p=6 d=24
rw_mgr_mem_calibrate_dqs_enable_calibration:2590: g=3 r=0 i=7 p=7 d=28
rw_mgr_mem_calibrate_dqs_enable_calibration:2607: g=3 found=1;
Reseting delay chain to zero
get_window_mid_index:2288 vfifo_center: *mid_min=-4 (index=7)
vfifo_center: new mid_min=-4 new_dqs=8
vfifo_center: start_dqs=4 start_dqs_en=-1 new_dqs=8 mid_min=-4
get_window_mid_index:2288 vfifo_center: *mid_min=1 (index=2)
rw_mgr_mem_calibrate_writes_center:3005 write_center: start_dqs=6
new_dqs=6 mid_min=0
get_window_mid_index:2288 vfifo_center: *mid_min=0 (index=3)
vfifo_center: new mid_min=0 new_dqs=8
vfifo_center: start_dqs=8 start_dqs_en=-1 new_dqs=8 mid_min=0
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 2) DQS: 2 > 0; adding 2 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 2) DQS: 2 > 0; adding 2 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 4) DQS: 4 > 0; adding 4 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 4) DQS: 4 > 0; adding 4 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 6) DQS: 6 > 0; adding 6 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 6) DQS: 6 > 0; adding 6 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 8) DQS: 8 > 0; adding 8 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 8) DQS: 8 > 0; adding 8 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 10) DQS: 10 > 0; adding 10 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 10) DQS: 10 > 0; adding 10 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
scc_mgr_apply_group_all_out_delay_add:691 (4, 12) DQS: 12 > 0; adding 12 to OUT1
scc_mgr_apply_group_all_out_delay_add:705 (4, 12) DQS: 12 > 0; adding 12 to OUT1
rw_mgr_mem_calibrate_guaranteed_write:2534 guaranteed write: g=4 p=0
rw_mgr_mem_calibrate_read_test_patterns:1290 test_load_patterns(4,ALL)
=> (170 == 255) => -5
rw_mgr_mem_calibrate_guaranteed_write:2554 Guaranteed read test failed: g=4 p=0
drivers/ddr/altera/sequencer.c: CALIBRATION FAILED
drivers/ddr/altera/sequencer.c: Calibration complete
SDRAM calibration failed.
### ERROR ### Please RESET the board ###
>
>> I'll try and find time to build with the 2016.01 debug statements here
>> and send you a log for comparison.
>>
>>
>
>
> --
> Best regards,
> Marek Vasut
More information about the U-Boot
mailing list