[U-Boot] [PATCH RFC 04/17] sunxi: h8_homlet_v2: Set DCDC1 to default voltage (3.3V)

[Chen-Yu Tsai]

The schematics of the h8_homlet_v2 show DCDC1 set to 3.3V. Some
Allwinner-based boards set it to 3.0V to conserve power. Since the
h8_homlet_v2 is a set-top box board with external power, there is
no such requirement.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 configs/h8_homlet_v2_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig
index 1f492ab..538a2c2 100644
--- a/configs/h8_homlet_v2_defconfig
+++ b/configs/h8_homlet_v2_defconfig
@@ -11,4 +11,3 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP_DCDC1_VOLT=3000
-- 
2.7.0