[U-Boot] [PATCH 63/69] x86: broadwell: Add video support
Simon Glass
sjg at chromium.org
Mon Mar 7 03:28:46 CET 2016
Add a video driver for Intel's broadwell integrated graphics controller.
This uses a binary blob for most init, with the driver just performing a few
basic tasks.
This driver supports VESA as the mode-setting mechanism. Since most boards
don't support driver model yet with VESA, a special case is added to the
Kconfig for broadwell. Eventually all boards will use driver model and this
can be removed.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/video/Kconfig | 14 +-
drivers/video/Makefile | 2 +
drivers/video/broadwell_igd.c | 797 ++++++++++++++++++++++++++++++++++++++++++
drivers/video/i915_reg.h | 362 +++++++++++++++++++
4 files changed, 1174 insertions(+), 1 deletion(-)
create mode 100644 drivers/video/broadwell_igd.c
create mode 100644 drivers/video/i915_reg.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index ff4179f..8361a71 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -112,7 +112,7 @@ config VIDEO_VESA
config FRAMEBUFFER_SET_VESA_MODE
bool "Set framebuffer graphics resolution"
- depends on VIDEO_VESA
+ depends on VIDEO_VESA || VIDEO_BROADWELL_IGD
help
Set VESA/native framebuffer mode (needed for bootsplash and graphical
framebuffer console)
@@ -362,6 +362,18 @@ config DISPLAY
The devices provide a simple interface to start up the display,
read display information and enable it.
+config VIDEO_BROADWELL_IGD
+ bool "Enable Intel Broadwell integrated graphics device"
+ depends on X86
+ help
+ This enabled support for integrated graphics on Intel broadwell
+ devices. Initialisation is mostly performed by a VGA boot ROM, with
+ some setup handled by U-Boot itself. The graphics adaptor works as
+ a VESA device and supports LCD panels, eDP and LVDS outputs.
+ Configuration of most aspects of device operation is performed using
+ a special tool which configures the VGA ROM, but the graphics
+ resolution can be selected in U-Boot.
+
config VIDEO_ROCKCHIP
bool "Enable Rockchip video support"
depends on DM_VIDEO
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9b635fc..2fd0891 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -19,6 +19,8 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
endif
+obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
+
obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
diff --git a/drivers/video/broadwell_igd.c b/drivers/video/broadwell_igd.c
new file mode 100644
index 0000000..ce4f296
--- /dev/null
+++ b/drivers/video/broadwell_igd.c
@@ -0,0 +1,797 @@
+/*
+ * From coreboot src/soc/intel/broadwell/igd.c
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <bios_emul.h>
+#include <dm.h>
+#include <pci_rom.h>
+#include <vbe.h>
+#include <video.h>
+#include <video_fb.h>
+#include <asm/cpu.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/pch.h>
+#include <linux/log2.h>
+#include "i915_reg.h"
+
+struct broadwell_igd_priv {
+ GraphicDevice ctfb;
+ u8 *regs;
+};
+
+struct broadwell_igd_plat {
+ u32 dp_hotplug[3];
+
+ int port_select;
+ int power_up_delay;
+ int power_backlight_on_delay;
+ int power_down_delay;
+ int power_backlight_off_delay;
+ int power_cycle_delay;
+ int cpu_backlight;
+ int pch_backlight;
+ int cdclk;
+ int pre_graphics_delay;
+};
+
+#define GT_RETRY 1000
+#define GT_CDCLK_337 0
+#define GT_CDCLK_450 1
+#define GT_CDCLK_540 2
+#define GT_CDCLK_675 3
+
+u32 board_map_oprom_vendev(u32 vendev)
+{
+ return SA_IGD_OPROM_VENDEV;
+}
+
+static int poll32(u8 *addr, uint mask, uint value)
+{
+ ulong start;
+
+ start = get_timer(0);
+ debug("%s: addr %p = %x\n", __func__, addr, readl(addr));
+ while ((readl(addr) & mask) != value) {
+ if (get_timer(start) > GT_RETRY) {
+ debug("poll32: timeout: %x\n", readl(addr));
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int haswell_early_init(struct udevice *dev)
+{
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u8 *regs = priv->regs;
+ int ret;
+
+ /* Enable Force Wake */
+ writel(0x00000020, regs + 0xa180);
+ writel(0x00010001, regs + 0xa188);
+ ret = poll32(regs + 0x130044, 1, 1);
+ if (ret)
+ goto err;
+
+ /* Enable Counters */
+ setbits_le32(regs + 0xa248, 0x00000016);
+
+ /* GFXPAUSE settings */
+ writel(0x00070020, regs + 0xa000);
+
+ /* ECO Settings */
+ clrsetbits_le32(regs + 0xa180, ~0xff3fffff, 0x15000000);
+
+ /* Enable DOP Clock Gating */
+ writel(0x000003fd, regs + 0x9424);
+
+ /* Enable Unit Level Clock Gating */
+ writel(0x00000080, regs + 0x9400);
+ writel(0x40401000, regs + 0x9404);
+ writel(0x00000000, regs + 0x9408);
+ writel(0x02000001, regs + 0x940c);
+
+ /*
+ * RC6 Settings
+ */
+
+ /* Wake Rate Limits */
+ setbits_le32(regs + 0xa090, 0x00000000);
+ setbits_le32(regs + 0xa098, 0x03e80000);
+ setbits_le32(regs + 0xa09c, 0x00280000);
+ setbits_le32(regs + 0xa0a8, 0x0001e848);
+ setbits_le32(regs + 0xa0ac, 0x00000019);
+
+ /* Render/Video/Blitter Idle Max Count */
+ writel(0x0000000a, regs + 0x02054);
+ writel(0x0000000a, regs + 0x12054);
+ writel(0x0000000a, regs + 0x22054);
+ writel(0x0000000a, regs + 0x1a054);
+
+ /* RC Sleep / RCx Thresholds */
+ setbits_le32(regs + 0xa0b0, 0x00000000);
+ setbits_le32(regs + 0xa0b4, 0x000003e8);
+ setbits_le32(regs + 0xa0b8, 0x0000c350);
+
+ /* RP Settings */
+ setbits_le32(regs + 0xa010, 0x000f4240);
+ setbits_le32(regs + 0xa014, 0x12060000);
+ setbits_le32(regs + 0xa02c, 0x0000e808);
+ setbits_le32(regs + 0xa030, 0x0003bd08);
+ setbits_le32(regs + 0xa068, 0x000101d0);
+ setbits_le32(regs + 0xa06c, 0x00055730);
+ setbits_le32(regs + 0xa070, 0x0000000a);
+
+ /* RP Control */
+ writel(0x00000b92, regs + 0xa024);
+
+ /* HW RC6 Control */
+ writel(0x88040000, regs + 0xa090);
+
+ /* Video Frequency Request */
+ writel(0x08000000, regs + 0xa00c);
+
+ /* Set RC6 VIDs */
+ ret = poll32(regs + 0x138124, (1 << 31), 0);
+ if (ret)
+ goto err;
+ writel(0, regs + 0x138128);
+ writel(0x80000004, regs + 0x138124);
+ ret = poll32(regs + 0x138124, (1 << 31), 0);
+ if (ret)
+ goto err;
+
+ /* Enable PM Interrupts */
+ writel(0x03000076, regs + 0x4402c);
+
+ /* Enable RC6 in idle */
+ writel(0x00040000, regs + 0xa094);
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+};
+
+static int haswell_late_init(struct udevice *dev)
+{
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u8 *regs = priv->regs;
+ int ret;
+
+ /* Lock settings */
+ setbits_le32(regs + 0x0a248, (1 << 31));
+ setbits_le32(regs + 0x0a004, (1 << 4));
+ setbits_le32(regs + 0x0a080, (1 << 2));
+ setbits_le32(regs + 0x0a180, (1 << 31));
+
+ /* Disable Force Wake */
+ writel(0x00010000, regs + 0xa188);
+ ret = poll32(regs + 0x130044, 1, 0);
+ if (ret)
+ goto err;
+ writel(0x00000001, regs + 0xa188);
+
+ /* Enable power well for DP and Audio */
+ setbits_le32(regs + 0x45400, (1 << 31));
+ ret = poll32(regs + 0x45400, 1 << 30, 1 << 30);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+};
+
+static int broadwell_early_init(struct udevice *dev)
+{
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u8 *regs = priv->regs;
+ int ret;
+
+ /* Enable Force Wake */
+ writel(0x00010001, regs + 0xa188);
+ ret = poll32(regs + 0x130044, 1, 1);
+ if (ret)
+ goto err;
+
+ /* Enable push bus metric control and shift */
+ writel(0x00000004, regs + 0xa248);
+ writel(0x000000ff, regs + 0xa250);
+ writel(0x00000010, regs + 0xa25c);
+
+ /* GFXPAUSE settings (set based on stepping) */
+
+ /* ECO Settings */
+ writel(0x45200000, regs + 0xa180);
+
+ /* Enable DOP Clock Gating */
+ writel(0x000000fd, regs + 0x9424);
+
+ /* Enable Unit Level Clock Gating */
+ writel(0x00000000, regs + 0x9400);
+ writel(0x40401000, regs + 0x9404);
+ writel(0x00000000, regs + 0x9408);
+ writel(0x02000001, regs + 0x940c);
+ writel(0x0000000a, regs + 0x1a054);
+
+ /* Video Frequency Request */
+ writel(0x08000000, regs + 0xa00c);
+
+ writel(0x00000009, regs + 0x138158);
+ writel(0x0000000d, regs + 0x13815c);
+
+ /*
+ * RC6 Settings
+ */
+
+ /* Wake Rate Limits */
+ clrsetbits_le32(regs + 0x0a090, ~0, 0);
+ setbits_le32(regs + 0x0a098, 0x03e80000);
+ setbits_le32(regs + 0x0a09c, 0x00280000);
+ setbits_le32(regs + 0x0a0a8, 0x0001e848);
+ setbits_le32(regs + 0x0a0ac, 0x00000019);
+
+ /* Render/Video/Blitter Idle Max Count */
+ writel(0x0000000a, regs + 0x02054);
+ writel(0x0000000a, regs + 0x12054);
+ writel(0x0000000a, regs + 0x22054);
+
+ /* RC Sleep / RCx Thresholds */
+ setbits_le32(regs + 0x0a0b0, 0x00000000);
+ setbits_le32(regs + 0x0a0b8, 0x00000271);
+
+ /* RP Settings */
+ setbits_le32(regs + 0x0a010, 0x000f4240);
+ setbits_le32(regs + 0x0a014, 0x12060000);
+ setbits_le32(regs + 0x0a02c, 0x0000e808);
+ setbits_le32(regs + 0x0a030, 0x0003bd08);
+ setbits_le32(regs + 0x0a068, 0x000101d0);
+ setbits_le32(regs + 0x0a06c, 0x00055730);
+ setbits_le32(regs + 0x0a070, 0x0000000a);
+ setbits_le32(regs + 0x0a168, 0x00000006);
+
+ /* RP Control */
+ writel(0x00000b92, regs + 0xa024);
+
+ /* HW RC6 Control */
+ writel(0x90040000, regs + 0xa090);
+
+ /* Set RC6 VIDs */
+ ret = poll32(regs + 0x138124, (1 << 31), 0);
+ if (ret)
+ goto err;
+ writel(0, regs + 0x138128);
+ writel(0x80000004, regs + 0x138124);
+ ret = poll32(regs + 0x138124, (1 << 31), 0);
+ if (ret)
+ goto err;
+
+ /* Enable PM Interrupts */
+ writel(0x03000076, regs + 0x4402c);
+
+ /* Enable RC6 in idle */
+ writel(0x00040000, regs + 0xa094);
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int broadwell_late_init(struct udevice *dev)
+{
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u8 *regs = priv->regs;
+ int ret;
+
+ /* Lock settings */
+ setbits_le32(regs + 0x0a248, 1 << 31);
+ setbits_le32(regs + 0x0a000, 1 << 18);
+ setbits_le32(regs + 0x0a180, 1 << 31);
+
+ /* Disable Force Wake */
+ writel(0x00010000, regs + 0xa188);
+ ret = poll32(regs + 0x130044, 1, 0);
+ if (ret)
+ goto err;
+
+ /* Enable power well for DP and Audio */
+ setbits_le32(regs + 0x45400, 1 << 31);
+ ret = poll32(regs + 0x45400, 1 << 30, 1 << 30);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+};
+
+
+static unsigned long gtt_read(struct broadwell_igd_priv *priv,
+ unsigned long reg)
+{
+ u32 val;
+
+ val = readl(priv->regs + reg);
+ return val;
+}
+
+static void gtt_write(struct broadwell_igd_priv *priv, unsigned long reg,
+ unsigned long data)
+{
+ writel(data, priv->regs + reg);
+}
+
+static inline void gtt_clrsetbits(struct broadwell_igd_priv *priv, u32 reg,
+ u32 bic, u32 or)
+{
+ clrsetbits_le32(priv->regs + reg, bic, or);
+}
+
+static int gtt_poll(struct broadwell_igd_priv *priv, u32 reg, u32 mask,
+ u32 value)
+{
+ unsigned try = GT_RETRY;
+ u32 data;
+
+ while (try--) {
+ data = gtt_read(priv, reg);
+ if ((data & mask) == value)
+ return 0;
+ udelay(10);
+ }
+
+ debug("GT init timeout\n");
+ return -ETIMEDOUT;
+}
+
+static void igd_setup_panel(struct udevice *dev)
+{
+ struct broadwell_igd_plat *plat = dev_get_platdata(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u32 reg32;
+
+ /* Setup Digital Port Hotplug */
+ reg32 = (plat->dp_hotplug[0] & 0x7) << 2;
+ reg32 |= (plat->dp_hotplug[1] & 0x7) << 10;
+ reg32 |= (plat->dp_hotplug[2] & 0x7) << 18;
+ gtt_write(priv, PCH_PORT_HOTPLUG, reg32);
+
+ /* Setup Panel Power On Delays */
+ reg32 = (plat->port_select & 0x3) << 30;
+ reg32 |= (plat->power_up_delay & 0x1fff) << 16;
+ reg32 |= (plat->power_backlight_on_delay & 0x1fff);
+ gtt_write(priv, PCH_PP_ON_DELAYS, reg32);
+
+ /* Setup Panel Power Off Delays */
+ reg32 = (plat->power_down_delay & 0x1fff) << 16;
+ reg32 |= (plat->power_backlight_off_delay & 0x1fff);
+ gtt_write(priv, PCH_PP_OFF_DELAYS, reg32);
+
+ /* Setup Panel Power Cycle Delay */
+ if (plat->power_cycle_delay) {
+ reg32 = gtt_read(priv, PCH_PP_DIVISOR);
+ reg32 &= ~0xff;
+ reg32 |= plat->power_cycle_delay & 0xff;
+ gtt_write(priv, PCH_PP_DIVISOR, reg32);
+ }
+
+ /* Enable Backlight if needed */
+ if (plat->cpu_backlight) {
+ gtt_write(priv, BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE);
+ gtt_write(priv, BLC_PWM_CPU_CTL, plat->cpu_backlight);
+ }
+ if (plat->pch_backlight) {
+ gtt_write(priv, BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE);
+ gtt_write(priv, BLC_PWM_PCH_CTL2, plat->pch_backlight);
+ }
+}
+
+static int igd_cdclk_init_haswell(struct udevice *dev)
+{
+ struct broadwell_igd_plat *plat = dev_get_platdata(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ int cdclk = plat->cdclk;
+ u16 devid;
+ int gpu_is_ulx = 0;
+ u32 dpdiv, lpcll;
+ int ret;
+
+ dm_pci_read_config16(dev, PCI_DEVICE_ID, &devid);
+
+ /* Check for ULX GT1 or GT2 */
+ if (devid == 0x0a0e || devid == 0x0a1e)
+ gpu_is_ulx = 1;
+
+ /* 675MHz is not supported on haswell */
+ if (cdclk == GT_CDCLK_675)
+ cdclk = GT_CDCLK_337;
+
+ /* If CD clock is fixed or ULT then set to 450MHz */
+ if ((gtt_read(priv, 0x42014) & 0x1000000) || cpu_is_ult())
+ cdclk = GT_CDCLK_450;
+
+ /* 540MHz is not supported on ULX */
+ if (gpu_is_ulx && cdclk == GT_CDCLK_540)
+ cdclk = GT_CDCLK_337;
+
+ /* 337.5MHz is not supported on non-ULT/ULX */
+ if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337)
+ cdclk = GT_CDCLK_450;
+
+ /* Set variables based on CD Clock setting */
+ switch (cdclk) {
+ case GT_CDCLK_337:
+ dpdiv = 169;
+ lpcll = (1 << 26);
+ break;
+ case GT_CDCLK_450:
+ dpdiv = 225;
+ lpcll = 0;
+ break;
+ case GT_CDCLK_540:
+ dpdiv = 270;
+ lpcll = (1 << 26);
+ break;
+ default:
+ ret = -EDOM;
+ goto err;
+ }
+
+ /* Set LPCLL_CTL CD Clock Frequency Select */
+ gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll);
+
+ /* ULX: Inform power controller of selected frequency */
+ if (gpu_is_ulx) {
+ if (cdclk == GT_CDCLK_450)
+ gtt_write(priv, 0x138128, 0x00000000); /* 450MHz */
+ else
+ gtt_write(priv, 0x138128, 0x00000001); /* 337.5MHz */
+ gtt_write(priv, 0x13812c, 0x00000000);
+ gtt_write(priv, 0x138124, 0x80000017);
+ }
+
+ /* Set CPU DP AUX 2X bit clock dividers */
+ gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv);
+ gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv);
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int igd_cdclk_init_broadwell(struct udevice *dev)
+{
+ struct broadwell_igd_plat *plat = dev_get_platdata(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ int cdclk = plat->cdclk;
+ u32 dpdiv, lpcll, pwctl, cdset;
+ int ret;
+
+ /* Inform power controller of upcoming frequency change */
+ gtt_write(priv, 0x138128, 0);
+ gtt_write(priv, 0x13812c, 0);
+ gtt_write(priv, 0x138124, 0x80000018);
+
+ /* Poll GT driver mailbox for run/busy clear */
+ if (gtt_poll(priv, 0x138124, 1 << 31, 0 << 31))
+ cdclk = GT_CDCLK_450;
+
+ if (gtt_read(priv, 0x42014) & 0x1000000) {
+ /* If CD clock is fixed then set to 450MHz */
+ cdclk = GT_CDCLK_450;
+ } else {
+ /* Program CD clock to highest supported freq */
+ if (cpu_is_ult())
+ cdclk = GT_CDCLK_540;
+ else
+ cdclk = GT_CDCLK_675;
+ }
+
+ /* CD clock frequency 675MHz not supported on ULT */
+ if (cpu_is_ult() && cdclk == GT_CDCLK_675)
+ cdclk = GT_CDCLK_540;
+
+ /* Set variables based on CD Clock setting */
+ switch (cdclk) {
+ case GT_CDCLK_337:
+ cdset = 337;
+ lpcll = (1 << 27);
+ pwctl = 2;
+ dpdiv = 169;
+ break;
+ case GT_CDCLK_450:
+ cdset = 449;
+ lpcll = 0;
+ pwctl = 0;
+ dpdiv = 225;
+ break;
+ case GT_CDCLK_540:
+ cdset = 539;
+ lpcll = (1 << 26);
+ pwctl = 1;
+ dpdiv = 270;
+ break;
+ case GT_CDCLK_675:
+ cdset = 674;
+ lpcll = (1 << 26) | (1 << 27);
+ pwctl = 3;
+ dpdiv = 338;
+ break;
+ default:
+ ret = -EDOM;
+ goto err;
+ }
+ debug("%s: frequency = %d\n", __func__, cdclk);
+
+ /* Set LPCLL_CTL CD Clock Frequency Select */
+ gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll);
+
+ /* Inform power controller of selected frequency */
+ gtt_write(priv, 0x138128, pwctl);
+ gtt_write(priv, 0x13812c, 0);
+ gtt_write(priv, 0x138124, 0x80000017);
+
+ /* Program CD Clock Frequency */
+ gtt_clrsetbits(priv, 0x46200, ~0xfffffc00, cdset);
+
+ /* Set CPU DP AUX 2X bit clock dividers */
+ gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv);
+ gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv);
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+u8 systemagent_revision(struct udevice *bus)
+{
+ ulong val;
+
+ pci_bus_read_config(bus, PCI_BDF(0, 0, 0), PCI_REVISION_ID, &val,
+ PCI_SIZE_32);
+
+ return val;
+}
+
+static int igd_pre_init(struct udevice *dev, bool is_broadwell)
+{
+ struct broadwell_igd_plat *plat = dev_get_platdata(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ u32 rp1_gfx_freq;
+ int ret;
+
+ mdelay(plat->pre_graphics_delay);
+
+ /* Early init steps */
+ if (is_broadwell) {
+ ret = broadwell_early_init(dev);
+ if (ret)
+ goto err;
+
+ /* Set GFXPAUSE based on stepping */
+ if (cpu_get_stepping() <= (CPUID_BROADWELL_E0 & 0xf) &&
+ systemagent_revision(pci_get_controller(dev)) <= 9) {
+ gtt_write(priv, 0xa000, 0x300ff);
+ } else {
+ gtt_write(priv, 0xa000, 0x30020);
+ }
+ } else {
+ ret = haswell_early_init(dev);
+ if (ret)
+ goto err;
+ }
+
+ /* Set RP1 graphics frequency */
+ rp1_gfx_freq = (readl(MCHBAR_REG(0x5998)) >> 8) & 0xff;
+ gtt_write(priv, 0xa008, rp1_gfx_freq << 24);
+
+ /* Post VBIOS panel setup */
+ igd_setup_panel(dev);
+
+ return 0;
+err:
+ debug("%s: ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int igd_post_init(struct udevice *dev, bool is_broadwell)
+{
+ int ret;
+
+ /* Late init steps */
+ if (is_broadwell) {
+ ret = igd_cdclk_init_broadwell(dev);
+ if (ret)
+ return ret;
+ ret = broadwell_late_init(dev);
+ if (ret)
+ return ret;
+ } else {
+ igd_cdclk_init_haswell(dev);
+ ret = haswell_late_init(dev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int broadwell_igd_int15_handler(void)
+{
+ int res = 0;
+
+ debug("%s: INT15 function %04x!\n", __func__, M.x86.R_AX);
+
+ switch (M.x86.R_AX) {
+ case 0x5f35:
+ /*
+ * Boot Display Device Hook:
+ * bit 0 = CRT
+ * bit 1 = TV (eDP)
+ * bit 2 = EFP
+ * bit 3 = LFP
+ * bit 4 = CRT2
+ * bit 5 = TV2 (eDP)
+ * bit 6 = EFP2
+ * bit 7 = LFP2
+ */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CX = 0x0000; /* Use video bios default */
+ res = 1;
+ break;
+ default:
+ debug("Unknown INT15 function %04x!\n", M.x86.R_AX);
+ break;
+ }
+
+ return res;
+}
+
+static int broadwell_igd_probe(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ bool is_broadwell;
+ GraphicDevice *gdev = &priv->ctfb;
+ int bits_per_pixel;
+ int ret;
+
+ if (!ll_boot_init()) {
+ /*
+ * If we are running from EFI or coreboot, this driver can't
+ * work.
+ */
+ printf("Not available (previous bootloader prevents it)\n");
+ return -EPERM;
+ }
+ is_broadwell = cpu_get_family_model() == BROADWELL_FAMILY_ULT;
+ bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+ debug("%s: is_broadwell=%d\n", __func__, is_broadwell);
+ ret = igd_pre_init(dev, is_broadwell);
+ if (!ret) {
+ ret = dm_pci_run_vga_bios(dev, broadwell_igd_int15_handler,
+ PCI_ROM_USE_NATIVE |
+ PCI_ROM_ALLOW_FALLBACK);
+ if (ret) {
+ printf("failed to run video BIOS: %d\n", ret);
+ ret = -EIO;
+ }
+ }
+ if (!ret)
+ ret = igd_post_init(dev, is_broadwell);
+ bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+ if (ret)
+ return ret;
+
+ if (vbe_get_video_info(gdev)) {
+ printf("No video mode configured\n");
+ return -ENXIO;
+ }
+
+ /* Use write-through for the graphics memory, 256MB */
+ ret = mtrr_add_request(MTRR_TYPE_WRTHROUGH, gdev->pciBase, 256 << 20);
+ if (!ret)
+ ret = mtrr_commit(true);
+ if (ret && ret != -ENOSYS) {
+ printf("Failed to add MTRR: Display will be slow (err %d)\n",
+ ret);
+ }
+
+ bits_per_pixel = gdev->gdfBytesPP * 8;
+ sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
+ bits_per_pixel);
+ printf("%s\n", gdev->modeIdent);
+ uc_priv->xsize = gdev->winSizeX;
+ uc_priv->ysize = gdev->winSizeY;
+ uc_priv->bpix = ilog2(bits_per_pixel);
+ plat->base = gdev->pciBase;
+ plat->size = gdev->memSize;
+ debug("fb=%x, size %x, display size=%d %d %d\n", gdev->pciBase,
+ gdev->memSize, uc_priv->xsize, uc_priv->ysize, uc_priv->bpix);
+
+ return 0;
+}
+
+static int broadwell_igd_ofdata_to_platdata(struct udevice *dev)
+{
+ struct broadwell_igd_plat *plat = dev_get_platdata(dev);
+ struct broadwell_igd_priv *priv = dev_get_priv(dev);
+ int node = dev->of_offset;
+ const void *blob = gd->fdt_blob;
+
+ if (fdtdec_get_int_array(blob, node, "intel,dp-hotplug",
+ plat->dp_hotplug,
+ ARRAY_SIZE(plat->dp_hotplug)))
+ return -EINVAL;
+ plat->port_select = fdtdec_get_int(blob, node, "intel,port-select", 0);
+ plat->power_cycle_delay = fdtdec_get_int(blob, node,
+ "intel,power-cycle-delay", 0);
+ plat->power_up_delay = fdtdec_get_int(blob, node,
+ "intel,power-up-delay", 0);
+ plat->power_down_delay = fdtdec_get_int(blob, node,
+ "intel,power-down-delay", 0);
+ plat->power_backlight_on_delay = fdtdec_get_int(blob, node,
+ "intel,power-backlight-on-delay", 0);
+ plat->power_backlight_off_delay = fdtdec_get_int(blob, node,
+ "intel,power-backlight-off-delay", 0);
+ plat->cpu_backlight = fdtdec_get_int(blob, node,
+ "intel,cpu-backlight", 0);
+ plat->pch_backlight = fdtdec_get_int(blob, node,
+ "intel,pch-backlight", 0);
+ plat->pre_graphics_delay = fdtdec_get_int(blob, node,
+ "intel,pre-graphics-delay", 0);
+ priv->regs = (u8 *)dm_pci_read_bar32(dev, 0);
+ debug("%s: regs at %p\n", __func__, priv->regs);
+ debug("dp_hotplug %d %d %d\n", plat->dp_hotplug[0], plat->dp_hotplug[1],
+ plat->dp_hotplug[2]);
+ debug("port_select = %d\n", plat->port_select);
+ debug("power_up_delay = %d\n", plat->power_up_delay);
+ debug("power_backlight_on_delay = %d\n",
+ plat->power_backlight_on_delay);
+ debug("power_down_delay = %d\n", plat->power_down_delay);
+ debug("power_backlight_off_delay = %d\n",
+ plat->power_backlight_off_delay);
+ debug("power_cycle_delay = %d\n", plat->power_cycle_delay);
+ debug("cpu_backlight = %x\n", plat->cpu_backlight);
+ debug("pch_backlight = %x\n", plat->pch_backlight);
+ debug("cdclk = %d\n", plat->cdclk);
+ debug("pre_graphics_delay = %d\n", plat->pre_graphics_delay);
+
+ return 0;
+}
+
+static const struct video_ops broadwell_igd_ops = {
+};
+
+static const struct udevice_id broadwell_igd_ids[] = {
+ { .compatible = "intel,broadwell-igd" },
+ { }
+};
+
+U_BOOT_DRIVER(broadwell_igd) = {
+ .name = "broadwell_igd",
+ .id = UCLASS_VIDEO,
+ .of_match = broadwell_igd_ids,
+ .ops = &broadwell_igd_ops,
+ .ofdata_to_platdata = broadwell_igd_ofdata_to_platdata,
+ .probe = broadwell_igd_probe,
+ .priv_auto_alloc_size = sizeof(struct broadwell_igd_priv),
+ .platdata_auto_alloc_size = sizeof(struct broadwell_igd_plat),
+};
diff --git a/drivers/video/i915_reg.h b/drivers/video/i915_reg.h
new file mode 100644
index 0000000..f540b15
--- /dev/null
+++ b/drivers/video/i915_reg.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _I915_REG_H_
+#define _I915_REG_H_
+
+/* Hotplug control (945+ only) */
+#define PORT_HOTPLUG_EN 0x61110
+#define HDMIB_HOTPLUG_INT_EN (1 << 29)
+#define DPB_HOTPLUG_INT_EN (1 << 29)
+#define HDMIC_HOTPLUG_INT_EN (1 << 28)
+#define DPC_HOTPLUG_INT_EN (1 << 28)
+#define HDMID_HOTPLUG_INT_EN (1 << 27)
+#define DPD_HOTPLUG_INT_EN (1 << 27)
+#define SDVOB_HOTPLUG_INT_EN (1 << 26)
+#define SDVOC_HOTPLUG_INT_EN (1 << 25)
+#define TV_HOTPLUG_INT_EN (1 << 18)
+#define CRT_HOTPLUG_INT_EN (1 << 9)
+#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
+#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
+/* must use period 64 on GM45 according to docs */
+#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8)
+#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7)
+#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5)
+#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4)
+#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
+
+/* Backlight control */
+#define BLC_PWM_CTL2 0x61250 /* 965+ only */
+#define BLM_PWM_ENABLE (1 << 31)
+#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */
+#define BLM_PIPE_SELECT (1 << 29)
+#define BLM_PIPE_SELECT_IVB (3 << 29)
+#define BLM_PIPE_A (0 << 29)
+#define BLM_PIPE_B (1 << 29)
+#define BLM_PIPE_C (2 << 29) /* ivb + */
+#define BLM_PIPE(pipe) ((pipe) << 29)
+#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */
+#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26)
+#define BLM_PHASE_IN_ENABLE (1 << 25)
+#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24)
+#define BLM_PHASE_IN_TIME_BASE_SHIFT (16)
+#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16)
+#define BLM_PHASE_IN_COUNT_SHIFT (8)
+#define BLM_PHASE_IN_COUNT_MASK (0xff << 8)
+#define BLM_PHASE_IN_INCR_SHIFT (0)
+#define BLM_PHASE_IN_INCR_MASK (0xff << 0)
+#define BLC_PWM_CTL 0x61254
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
+#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe)
+#define BLM_POLARITY_PNV (1 << 0) /* pnv only */
+
+#define BLC_HIST_CTL 0x61260
+
+/*
+ * New registers for PCH-split platforms. Safe where new bits show up, the
+ * register layout machtes with gen4 BLC_PWM_CTL[12]
+ */
+#define BLC_PWM_CPU_CTL2 0x48250
+#define BLC_PWM2_ENABLE (1<<31)
+#define BLC_PWM_CPU_CTL 0x48254
+
+#define BLM_HIST_CTL 0x48260
+#define ENH_HIST_ENABLE (1<<31)
+#define ENH_MODIF_TBL_ENABLE (1<<30)
+#define ENH_PIPE_A_SELECT (0<<29)
+#define ENH_PIPE_B_SELECT (1<<29)
+#define ENH_PIPE(pipe) _PIPE(pipe, ENH_PIPE_A_SELECT, ENH_PIPE_B_SELECT)
+#define HIST_MODE_YUV (0<<24)
+#define HIST_MODE_HSV (1<<24)
+#define ENH_MODE_DIRECT (0<<13)
+#define ENH_MODE_ADDITIVE (1<<13)
+#define ENH_MODE_MULTIPLICATIVE (2<<13)
+#define BIN_REGISTER_SET (1<<11)
+#define ENH_NUM_BINS 32
+
+#define BLM_HIST_ENH 0x48264
+
+#define BLM_HIST_GUARD_BAND 0x48268
+#define BLM_HIST_INTR_ENABLE (1<<31)
+#define BLM_HIST_EVENT_STATUS (1<<30)
+#define BLM_HIST_INTR_DELAY_MASK (0xFF<<22)
+#define BLM_HIST_INTR_DELAY_SHIFT 22
+
+/*
+ * PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
+ * like the normal CTL from gen4 and earlier. Hooray for confusing naming.
+ */
+#define BLC_PWM_PCH_CTL1 0xc8250
+#define BLM_PCH_PWM_ENABLE (1 << 31)
+#define BLM_PCH_OVERRIDE_ENABLE (1 << 30)
+#define BLM_PCH_POLARITY (1 << 29)
+#define BLC_PWM_PCH_CTL2 0xc8254
+
+/* digital port hotplug */
+#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */
+#define PORTD_HOTPLUG_ENABLE (1 << 20)
+#define PORTD_PULSE_DURATION_2ms (0)
+#define PORTD_PULSE_DURATION_4_5ms (1 << 18)
+#define PORTD_PULSE_DURATION_6ms (2 << 18)
+#define PORTD_PULSE_DURATION_100ms (3 << 18)
+#define PORTD_PULSE_DURATION_MASK (3 << 18)
+#define PORTD_HOTPLUG_NO_DETECT (0)
+#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16)
+#define PORTD_HOTPLUG_LONG_DETECT (1 << 17)
+#define PORTC_HOTPLUG_ENABLE (1 << 12)
+#define PORTC_PULSE_DURATION_2ms (0)
+#define PORTC_PULSE_DURATION_4_5ms (1 << 10)
+#define PORTC_PULSE_DURATION_6ms (2 << 10)
+#define PORTC_PULSE_DURATION_100ms (3 << 10)
+#define PORTC_PULSE_DURATION_MASK (3 << 10)
+#define PORTC_HOTPLUG_NO_DETECT (0)
+#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8)
+#define PORTC_HOTPLUG_LONG_DETECT (1 << 9)
+#define PORTB_HOTPLUG_ENABLE (1 << 4)
+#define PORTB_PULSE_DURATION_2ms (0)
+#define PORTB_PULSE_DURATION_4_5ms (1 << 2)
+#define PORTB_PULSE_DURATION_6ms (2 << 2)
+#define PORTB_PULSE_DURATION_100ms (3 << 2)
+#define PORTB_PULSE_DURATION_MASK (3 << 2)
+#define PORTB_HOTPLUG_NO_DETECT (0)
+#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0)
+#define PORTB_HOTPLUG_LONG_DETECT (1 << 1)
+
+#define PCH_GPIOA 0xc5010
+#define PCH_GPIOB 0xc5014
+#define PCH_GPIOC 0xc5018
+#define PCH_GPIOD 0xc501c
+#define PCH_GPIOE 0xc5020
+#define PCH_GPIOF 0xc5024
+
+#define PCH_GMBUS0 0xc5100
+#define PCH_GMBUS1 0xc5104
+#define PCH_GMBUS2 0xc5108
+#define PCH_GMBUS3 0xc510c
+#define PCH_GMBUS4 0xc5110
+#define PCH_GMBUS5 0xc5120
+
+#define _PCH_DPLL_A 0xc6014
+#define _PCH_DPLL_B 0xc6018
+#define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B)
+
+#define _PCH_FPA0 0xc6040
+#define FP_CB_TUNE (0x3<<22)
+#define _PCH_FPA1 0xc6044
+#define _PCH_FPB0 0xc6048
+#define _PCH_FPB1 0xc604c
+#define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0)
+#define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1)
+
+#define PCH_DPLL_TEST 0xc606c
+
+#define PCH_DREF_CONTROL 0xC6200
+#define DREF_CONTROL_MASK 0x7fc3
+#define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13)
+#define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13)
+#define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13)
+#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13)
+#define DREF_SSC_SOURCE_DISABLE (0<<11)
+#define DREF_SSC_SOURCE_ENABLE (2<<11)
+#define DREF_SSC_SOURCE_MASK (3<<11)
+#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9)
+#define DREF_NONSPREAD_CK505_ENABLE (1<<9)
+#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9)
+#define DREF_NONSPREAD_SOURCE_MASK (3<<9)
+#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7)
+#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7)
+#define DREF_SUPERSPREAD_SOURCE_MASK (3<<7)
+#define DREF_SSC4_DOWNSPREAD (0<<6)
+#define DREF_SSC4_CENTERSPREAD (1<<6)
+#define DREF_SSC1_DISABLE (0<<1)
+#define DREF_SSC1_ENABLE (1<<1)
+#define DREF_SSC4_DISABLE (0)
+#define DREF_SSC4_ENABLE (1)
+
+#define PCH_RAWCLK_FREQ 0xc6204
+#define FDL_TP1_TIMER_SHIFT 12
+#define FDL_TP1_TIMER_MASK (3<<12)
+#define FDL_TP2_TIMER_SHIFT 10
+#define FDL_TP2_TIMER_MASK (3<<10)
+#define RAWCLK_FREQ_MASK 0x3ff
+
+#define PCH_DPLL_TMR_CFG 0xc6208
+
+#define PCH_SSC4_PARMS 0xc6210
+#define PCH_SSC4_AUX_PARMS 0xc6214
+
+#define PCH_DPLL_SEL 0xc7000
+#define TRANSA_DPLL_ENABLE (1<<3)
+#define TRANSA_DPLLB_SEL (1<<0)
+#define TRANSA_DPLLA_SEL 0
+#define TRANSB_DPLL_ENABLE (1<<7)
+#define TRANSB_DPLLB_SEL (1<<4)
+#define TRANSB_DPLLA_SEL (0)
+#define TRANSC_DPLL_ENABLE (1<<11)
+#define TRANSC_DPLLB_SEL (1<<8)
+#define TRANSC_DPLLA_SEL (0)
+
+/* transcoder */
+
+#define _TRANS_HTOTAL_A 0xe0000
+#define TRANS_HTOTAL_SHIFT 16
+#define TRANS_HACTIVE_SHIFT 0
+#define _TRANS_HBLANK_A 0xe0004
+#define TRANS_HBLANK_END_SHIFT 16
+#define TRANS_HBLANK_START_SHIFT 0
+#define _TRANS_HSYNC_A 0xe0008
+#define TRANS_HSYNC_END_SHIFT 16
+#define TRANS_HSYNC_START_SHIFT 0
+#define _TRANS_VTOTAL_A 0xe000c
+#define TRANS_VTOTAL_SHIFT 16
+#define TRANS_VACTIVE_SHIFT 0
+#define _TRANS_VBLANK_A 0xe0010
+#define TRANS_VBLANK_END_SHIFT 16
+#define TRANS_VBLANK_START_SHIFT 0
+#define _TRANS_VSYNC_A 0xe0014
+#define TRANS_VSYNC_END_SHIFT 16
+#define TRANS_VSYNC_START_SHIFT 0
+#define _TRANS_VSYNCSHIFT_A 0xe0028
+
+#define _TRANSA_DATA_M1 0xe0030
+#define _TRANSA_DATA_N1 0xe0034
+#define _TRANSA_DATA_M2 0xe0038
+#define _TRANSA_DATA_N2 0xe003c
+#define _TRANSA_DP_LINK_M1 0xe0040
+#define _TRANSA_DP_LINK_N1 0xe0044
+#define _TRANSA_DP_LINK_M2 0xe0048
+#define _TRANSA_DP_LINK_N2 0xe004c
+
+/* Per-transcoder DIP controls */
+
+#define _VIDEO_DIP_CTL_A 0xe0200
+#define _VIDEO_DIP_DATA_A 0xe0208
+#define _VIDEO_DIP_GCP_A 0xe0210
+
+#define _VIDEO_DIP_CTL_B 0xe1200
+#define _VIDEO_DIP_DATA_B 0xe1208
+#define _VIDEO_DIP_GCP_B 0xe1210
+
+#define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B)
+#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B)
+#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B)
+
+#define VLV_VIDEO_DIP_CTL_A 0x60200
+#define VLV_VIDEO_DIP_DATA_A 0x60208
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210
+
+#define VLV_VIDEO_DIP_CTL_B 0x61170
+#define VLV_VIDEO_DIP_DATA_B 0x61174
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178
+
+#define VLV_TVIDEO_DIP_CTL(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B)
+#define VLV_TVIDEO_DIP_DATA(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B)
+#define VLV_TVIDEO_DIP_GCP(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B)
+
+/* vlv has 2 sets of panel control regs. */
+#define PIPEA_PP_STATUS 0x61200
+#define PIPEA_PP_CONTROL 0x61204
+#define PIPEA_PP_ON_DELAYS 0x61208
+#define PIPEA_PP_OFF_DELAYS 0x6120c
+#define PIPEA_PP_DIVISOR 0x61210
+
+#define PIPEB_PP_STATUS 0x61300
+#define PIPEB_PP_CONTROL 0x61304
+#define PIPEB_PP_ON_DELAYS 0x61308
+#define PIPEB_PP_OFF_DELAYS 0x6130c
+#define PIPEB_PP_DIVISOR 0x61310
+
+#define PCH_PP_STATUS 0xc7200
+#define PCH_PP_CONTROL 0xc7204
+#define PANEL_UNLOCK_REGS (0xabcd << 16)
+#define PANEL_UNLOCK_MASK (0xffff << 16)
+#define EDP_FORCE_VDD (1 << 3)
+#define EDP_BLC_ENABLE (1 << 2)
+#define PANEL_POWER_RESET (1 << 1)
+#define PANEL_POWER_OFF (0 << 0)
+#define PANEL_POWER_ON (1 << 0)
+#define PCH_PP_ON_DELAYS 0xc7208
+#define PANEL_PORT_SELECT_MASK (3 << 30)
+#define PANEL_PORT_SELECT_LVDS (0 << 30)
+#define PANEL_PORT_SELECT_DPA (1 << 30)
+#define EDP_PANEL (1 << 30)
+#define PANEL_PORT_SELECT_DPC (2 << 30)
+#define PANEL_PORT_SELECT_DPD (3 << 30)
+#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000)
+#define PANEL_POWER_UP_DELAY_SHIFT 16
+#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff)
+#define PANEL_LIGHT_ON_DELAY_SHIFT 0
+
+#define PCH_PP_OFF_DELAYS 0xc720c
+#define PANEL_POWER_PORT_SELECT_MASK (0x3 << 30)
+#define PANEL_POWER_PORT_LVDS (0 << 30)
+#define PANEL_POWER_PORT_DP_A (1 << 30)
+#define PANEL_POWER_PORT_DP_C (2 << 30)
+#define PANEL_POWER_PORT_DP_D (3 << 30)
+#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000)
+#define PANEL_POWER_DOWN_DELAY_SHIFT 16
+#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff)
+#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
+
+#define PCH_PP_DIVISOR 0xc7210
+#define PP_REFERENCE_DIVIDER_MASK (0xffffff00)
+#define PP_REFERENCE_DIVIDER_SHIFT 8
+#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f)
+#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
+
+#define PCH_DP_B 0xe4100
+#define PCH_DPB_AUX_CH_CTL 0xe4110
+#define PCH_DPB_AUX_CH_DATA1 0xe4114
+#define PCH_DPB_AUX_CH_DATA2 0xe4118
+#define PCH_DPB_AUX_CH_DATA3 0xe411c
+#define PCH_DPB_AUX_CH_DATA4 0xe4120
+#define PCH_DPB_AUX_CH_DATA5 0xe4124
+
+#define PCH_DP_C 0xe4200
+#define PCH_DPC_AUX_CH_CTL 0xe4210
+#define PCH_DPC_AUX_CH_DATA1 0xe4214
+#define PCH_DPC_AUX_CH_DATA2 0xe4218
+#define PCH_DPC_AUX_CH_DATA3 0xe421c
+#define PCH_DPC_AUX_CH_DATA4 0xe4220
+#define PCH_DPC_AUX_CH_DATA5 0xe4224
+
+#define PCH_DP_D 0xe4300
+#define PCH_DPD_AUX_CH_CTL 0xe4310
+#define PCH_DPD_AUX_CH_DATA1 0xe4314
+#define PCH_DPD_AUX_CH_DATA2 0xe4318
+#define PCH_DPD_AUX_CH_DATA3 0xe431c
+#define PCH_DPD_AUX_CH_DATA4 0xe4320
+#define PCH_DPD_AUX_CH_DATA5 0xe4324
+
+#endif /* _I915_REG_H_ */
--
2.7.0.rc3.207.g0ac5344
More information about the U-Boot
mailing list