[U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support
york sun
york.sun at nxp.com
Wed Mar 23 16:29:53 CET 2016
On 03/23/2016 01:12 AM, Yao Yuan wrote:
> On 03/23/2016 03:09 AM, York Sun wrote:
>> On 03/06/2016 11:56 PM, Yuan Yao wrote:
>>> From: Yuan Yao <yao.yuan at nxp.com>
>>>
>>> This series add support for QSPI boot on LS2080AQDS.
>>>
>>> Yuan Yao (11):
>>> armv8: ls2080aqds: Select QSPI CLK div via SCFG
>>> configs: ls2080a_common: Remove duplicate NOR configs
>>> configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
>>> configs: ls2080aqds: Enable QSPI flash support
>>> dm: dts: ls2080aqds: Add QSPI dts node
>>> armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
>>> configs: ls2080a: Increase load image len in NAND boot
>>> ls2080aqds_nand_defconfig: Enable QSPI & its dependence
>>> armv8: ls2080aqds: Enable QSPI boot support
>>> Changed in v2:
>>> merged the patch:
>>> 0009-armv8-ls2080aqds-Enable-QSPI-boot-support.patch
>>> 0010-ls2080aqds-Enable-support-for-boot-from-QSPI.patch
>>> 0012-LS2080QDS-QSPI-boot-fix-issues.patch
>>> in this patch.
>>> board/ls2080qds: add the procedure to deply QSPI image.
>>> New add in v2.
>>> freescale: cmd: qixis: tidy up the duplicated code
>>>
>>> arch/arm/dts/fsl-ls2080a-qds.dts | 14 +++++++
>>> arch/arm/dts/fsl-ls2080a.dtsi | 10 +++++
>>> arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 ++
>>> .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 3 ++
>>> board/freescale/common/qixis.c | 12 ++----
>>> board/freescale/ls2080aqds/README | 35 ++++++++++++++++++
>>> board/freescale/ls2080aqds/ls2080aqds.c | 16 ++++++++
>>> common/board_f.c | 6 +--
>>> configs/ls2080aqds_nand_defconfig | 9 +++++
>>> configs/ls2080aqds_qspi_defconfig | 10 +++++
>>> include/configs/ls2080a_common.h | 11 ++----
>>> include/configs/ls2080a_simu.h | 7 ++++
>>> include/configs/ls2080aqds.h | 43 +++++++++++++++++++++-
>>> 13 files changed, 159 insertions(+), 21 deletions(-) create mode
>>> 100644 configs/ls2080aqds_qspi_defconfig
>>>
>>
>> Yuan,
>>
>> This set was sent before Jagan's comment on your v1 patch. Please let me
>> know if you need to update your patches.
>>
>
> Yes, I will update this patch set.
> But from some review and comments there is a lot of the changes for this patch set.
> So I need some time to confirm and test it.
> I will resend this patch set as soon as possible.
>
That's OK. Take you time. You may have to wait until Jagan's patch set is settled
York
More information about the U-Boot
mailing list