[U-Boot] [PATCH 07/12] configs: ls2080a: Increase load image len in NAND boot

[Yuan Yao]

From: Yuan Yao <yao.yuan at nxp.com>

Freescale QSPI and DSPI driver have been converted to Driver Mode.
This converting bring dtb file for u-boot and this increase the size
of u-boot image.
LS2080A nand boot use SPL framework.
This patch increase the size of image load from NAND to RAM in SPL.

Signed-off-by: Yuan Yao <yao.yuan at nxp.com>
---
 include/configs/ls2080a_common.h | 2 +-
 include/configs/ls2080aqds.h     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 82af464..8048753 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -305,7 +305,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(640 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index ee51348..eaca55c 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -240,7 +240,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
 #else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
-- 
2.1.0.27.g96db324