[U-Boot] [PATCH 2/2] mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Having CONFIG_SYS_MALLOC_LEN in mx7_common.h is not a good idea,
because the malloc() pool size is board dependent. 

For example: if a certain board has support for splashscreen or DFU,
it may be necessary to adjust CONFIG_SYS_MALLOC_LEN to a larger value.

So define CONFIG_SYS_MALLOC_LEN in each board config file.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 include/configs/mx7_common.h  | 3 ---
 include/configs/mx7dsabresd.h | 3 +++
 include/configs/warp7.h       | 4 ++++
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index 5034464..9bd6114 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -28,9 +28,6 @@
 /* Enable iomux-lpsr support */
 #define CONFIG_IOMUX_LPSR
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
-
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 988d363..25ed29d 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -16,6 +16,9 @@
 
 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
 
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 5ea5512..d1404b2 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -16,6 +16,10 @@
 
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* MMC Config*/
-- 
1.9.1