[U-Boot] [PATCH] armv8/ls2080ardb: Update DDR timing to support more UDIMMs

[york sun]

On 03/20/2016 08:03 PM, Shengzhou Liu wrote:
> Optimize DDR timing for good margins to support new Transcend
> and Apacer DDR4 UDIMM besides current Micron UDIMM.
> 
> Verified 1866MT/s and 2133MT/s with following UDIMM on LS2080ARDB.
>  - Micron UDIMM: MTA18ASF1G72AZ-2G1A1Z
>  - Apacer UDIMM: 78.C1GM4.AF10B
>  - Transcend UDIMM: TS1GLH72V1H
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
> ---
>  board/freescale/ls2080ardb/ddr.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
> index bda9d4a..7274778 100644
> --- a/board/freescale/ls2080ardb/ddr.h
> +++ b/board/freescale/ls2080ardb/ddr.h
> @@ -30,8 +30,8 @@ static const struct board_specific_parameters udimm0[] = {
>  	 */
>  	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
>  	{2,  1666, 0, 4,     8, 0x08090B0D, 0x0E10100C,},
> -	{2,  1900, 0, 4,     8, 0x090A0C0E, 0x1012120D,},
> -	{2,  2300, 0, 4,     9, 0x0A0B0C10, 0x1114140E,},
> +	{2,  1900, 0, 6,   0xA, 0x0B0C0E11, 0x1214140F,},
> +	{2,  2300, 0, 6,   0xB, 0x0C0D0F12, 0x14161610,},
>  	{}
>  };
>  
> 

Please test lower speeds as well, if new DIMMs are to be supported.

York