[U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].

[Marek Vasut]

On 03/21/2016 12:44 PM, Purna Chandra Mandal wrote:
> On 03/21/2016 05:09 PM, Marek Vasut wrote:
>> On 03/21/2016 12:19 PM, Purna Chandra Mandal wrote:
>>> On 03/21/2016 04:49 PM, Marek Vasut wrote:
>>>
>>>> On 03/21/2016 08:35 AM, Purna Chandra Mandal wrote:
>>>>> ARM defines __raw_writes[bwql], __raw_reads[bwql] in arch io.h
>>>>> but not the writes[bwql], reads[bwql] needed by some drivers.
>>>>>
>>>>> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
>>>> Applied all four to u-boot-usb/master, thanks!
>>>>
>>> Thanks. :)
>>>
>> Thank you for persevering ;-)
>>
>> btw. have you worked with Olimex PIC32-EMZ64 (PIC32MZ2048EFH064) ?
>> Can it be used for testing U-Boot on PIC32 and this musb stuff ?
> 
> Not exactly 'PIC32MZ2048EFH064' but on some other board having
> PIC32MZ2048EFM144 (with additional SRAM connected on EBI).
> Anyway MUSB stuff is same. And pin-mapping will be different
> so need to update pinctrl. Otherwise it should be fine for U-Boot
> testing.

I see, thanks!


-- 
Best regards,
Marek Vasut