[U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s

[Chen-Yu Tsai]

The Sinlinx A31s SDK is a A31s based module/baseboard development kit.

The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
There are also pads for UART0, JTAG and I2S.

The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
buttons, RS232 style UART and USB OTG (though VBUS is not connected).
Various headers are available for other addon modules, such as SDIO
WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 board/sunxi/MAINTAINERS           |  6 ++++++
 configs/Sinlinx_SinA31s_defconfig | 21 +++++++++++++++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 configs/Sinlinx_SinA31s_defconfig

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 5ae5ce6..8cb9051 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -191,6 +191,12 @@ M:	Siarhei Siamashka <siarhei.siamashka at gmail.com>
 S:	Maintained
 F:	configs/MSI_Primo81_defconfig
 
+SINLINX SINA31s BOARD
+M:	Chen-Yu Tsai <wens at csie.org>
+S:	Maintained
+F:	configs/Sinlinx_SinA31s_defconfig
+W:	http://linux-sunxi.org/Sinlinx_SinA31s
+
 SINLINX SINA33 BOARD
 M:	Chen-Yu Tsai <wens at csie.org>
 S:	Maintained
diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
new file mode 100644
index 0000000..9254bb2
--- /dev/null
+++ b/configs/Sinlinx_SinA31s_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=432
+CONFIG_DRAM_ZQ=251
+CONFIG_MMC0_CD_PIN="PA4"
+CONFIG_MMC3_PINS="PC"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
-- 
2.7.0