[U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks

[Lokesh Vutla]

Updating the memory banks properly so that DT is populated accordingly.
And updating this only after DDR is properly detected by eeprom, so that
git bisect is still maintained.

Acked-by: Nishanth Menon <nm at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 board/ti/dra7xx/evm.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index d142ccc..4c6dfa0 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -268,6 +268,20 @@ int board_init(void)
 	return 0;
 }
 
+void dram_init_banksize(void)
+{
+	u64 ram_size;
+
+	ram_size = board_ti_get_emif_size();
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+	if (ram_size > CONFIG_MAX_MEM_MAPPED) {
+		gd->bd->bi_dram[1].start = 0x200000000;
+		gd->bd->bi_dram[1].size = ram_size - CONFIG_MAX_MEM_MAPPED;
+	}
+}
+
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-- 
2.1.4