[U-Boot] [PATCH v5 09/30] hikey: Add MMU tables

[Alexander Graf]

The hikey runs with dcache disabled today. There really should be no reason
not to use caches on AArch64, so let's add MMU definitions and enable the
dcache.

Signed-off-by: Alexander Graf <agraf at suse.de>

---

v1 -> v2:

  - Move tables to .c file
---
 board/hisilicon/hikey/hikey.c | 21 +++++++++++++++++++++
 include/configs/hikey.h       |  5 +++--
 2 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c
index c4ae40b..1edc807 100644
--- a/board/hisilicon/hikey/hikey.c
+++ b/board/hisilicon/hikey/hikey.c
@@ -19,6 +19,7 @@
 #include <asm/arch/periph.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/hi6220.h>
+#include <asm/armv8/mmu.h>
 
 /*TODO drop this table in favour of device tree */
 static const struct hikey_gpio_platdata hi6220_gpio[] = {
@@ -87,6 +88,26 @@ U_BOOT_DEVICE(hikey_seriala) = {
 	.platdata = &serial_platdata,
 };
 
+static struct mm_region hikey_mem_map[] = {
+	{
+		.base = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.base = 0x80000000UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = hikey_mem_map;
+
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_uart_init(void)
 {
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 796861e..d33dcef 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -21,8 +21,9 @@
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
-/* Cache Definitions */
-#define CONFIG_SYS_DCACHE_OFF
+/* MMU Definitions */
+#define CONFIG_SYS_CACHELINE_SIZE	64
+#define CONFIG_SYS_FULL_VA
 
 #define CONFIG_IDENT_STRING		"hikey"
 
-- 
1.8.5.6