[U-Boot] [PATCH V2 3/5] rpi: add Raspberry Pi 3 board ID

[Stephen Warren]

This allows U-Boot to known the name of the board.

The existing rpi_2_defconfig can operate correctly on the Raspberry Pi 3
in 32-bit mode /if/ you have configured the firmware to use the PL011 UART
as the console UART (the default is the mini UART). This requires two
things:
a) config.txt should contain dtoverlay=pi3-miniuart-bt
b) You should run the following to tell the VC FW to process DT when
booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD card
as the kernel image:

   path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img

This works as of firmware.git commit 046effa13ebc "firmware: arm_loader:
emmc clock depends on core clock See:
https://github.com/raspberrypi/firmware/issues/572".

Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
---
v2: Enhance the commit description to contain complete details re: how to
run rpi_2_defconfig on a Raspberry Pi 3.
---
 board/raspberrypi/rpi/rpi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 54ea4a814b54..d31a79c661d9 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -109,6 +109,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
 		"bcm2836-rpi-2-b.dtb",
 		true,
 	},
+	[0x8] = {
+		"3 Model B",
+		"bcm2837-rpi-3-b.dtb",
+		true,
+	},
 	[0x9] = {
 		"Zero",
 		"bcm2835-rpi-zero.dtb",
-- 
2.7.3