[U-Boot] [U-Boot, V5, 1/7] ARM: OMAP4/5: Centralize early clock initialization

[Tom Rini]

On Wed, Feb 24, 2016 at 12:30:52PM -0600, Kipisz, Steven wrote:

> Early clock initialization is currently done in two stages for OMAP4/5
> SoCs. The first stage is the initialization of console clocks and
> then we initialize basic clocks for functionality necessary for SoC
> initialization and basic board functionality.
> 
> By splitting up prcm_init and centralizing this clock initialization,
> we setup the code for follow on patches that can do board specific
> initialization such as board detection which will depend on these
> basic clocks.
> 
> As part of this change, since the early clock initialization
> is centralized, we no longer need to expose the console clock
> initialization.
> 
> NOTE: we change the sequence slightly by initializing console clocks
> timer after the io settings are complete, but this is not expected
> to have any functioanlity impact since we setup the basic IO drive
> strength initialization as part of do_io_settings.
> 
> Signed-off-by: Steve Kipisz <s-kipisz2 at ti.com>
> Reviewed-by: Tom Rini <trini at konsulko.com>
> Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>
> Reviewed-by: Tom Rini <trini at konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/4e1430c3/attachment.sig>