[U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards

[Stefano Babic]

On 29/01/2016 21:16, Akshay Bhat wrote:
> Add support for GE B450v3, B650v3 and B850v3 boards. The boards
> are based on Advantech BA16 module which has a i.MX6D processor.
> The boards support:
>  - FEC Ethernet
>  - USB Ports
>  - SDHC and MMC boot
>  - SPI NOR
>  - LVDS and HDMI display
> 
> Basic information about the module:
>  - Module manufacturer: Advantech
>  - CPU: Freescale ARM Cortex-A9 i.MX6D
>  - SPECS:
>      Up to 2GB Onboard DDR3 Memory;
>      Up to 16GB Onboard eMMC NAND Flash
>      Supports OpenGL ES 2.0 and OpenVG 1.1
>      HDMI, 24-bit LVDS
>      1x UART, 2x I2C, 8x GPIO,
>      4x Host USB 2.0 port, 1x USB OTG port,
>      1x micro SD (SDHC),1x SDIO, 1x SATA II,
>      1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
> 
> Signed-off-by: Akshay Bhat <akshay.bhat at timesys.com>
> ---

Applied to -next, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================