[U-Boot] [PATCH v4 04/14] SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb

[york sun]

On 02/08/2016 09:27 PM, Saksham Jain wrote:
> Following changes have been made to enable secure boot:
> 1) Sec_init has been called in starting to initialize SEC Block (CAAM)
> which will be used for Secure Boot validation later for both ls2080a qds
> and rdb
> 2) 64Bit address in ESBC Header has been enabled as this SoC is based on
> armv8
> 3) Secure Boot defconfigs created for boards (NOR Boot).
> 
> Signed-off-by: Aneesh Bansal <aneesh.bansal at nxp.com>
> Signed-off-by: Saksham Jain <saksham.jain at nxp.com>
> ---
> Changes for v2:
> 	- No changes
> Changes for v3:
> 	- No changes
> Changes for v4:
> 	- Cleaned up commit message
> 
>  arch/arm/include/asm/fsl_secure_boot.h   |  9 +++++++--
>  board/freescale/ls2080aqds/ls2080aqds.c  |  5 ++++-
>  board/freescale/ls2080ardb/ls2080ardb.c  |  5 ++++-
>  configs/ls2080aqds_SECURE_BOOT_defconfig | 15 +++++++++++++++
>  configs/ls2080ardb_SECURE_BOOT_defconfig | 15 +++++++++++++++
>  configs/ls2085aqds_SECURE_BOOT_defconfig | 15 +++++++++++++++
>  configs/ls2085ardb_SECURE_BOOT_defconfig | 15 +++++++++++++++
>  include/configs/ls2080aqds.h             |  2 ++
>  include/configs/ls2080ardb.h             |  2 ++
>  9 files changed, 79 insertions(+), 4 deletions(-)
>  create mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig
>  create mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig
>  create mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig
>  create mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig
> 

Please update MAINTAINERS file.

York