[U-Boot] [PATCH 4/5] arm: meson: use device tree

Beniamino Galvani b.galvani at gmail.com
Sun Mar 27 22:22:14 CEST 2016


Convert the board and config files to the use of device tree.

Signed-off-by: Beniamino Galvani <b.galvani at gmail.com>
---
 arch/arm/mach-meson/board.c | 24 ++++++++++++++++++++++++
 configs/odroid-c2_defconfig |  2 ++
 2 files changed, 26 insertions(+)

diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c
index 346a2c2..9781f1a 100644
--- a/arch/arm/mach-meson/board.c
+++ b/arch/arm/mach-meson/board.c
@@ -5,6 +5,8 @@
  */
 
 #include <common.h>
+#include <libfdt.h>
+#include <linux/err.h>
 #include <asm/arch/gxbb.h>
 #include <asm/armv8/mmu.h>
 
@@ -17,9 +19,31 @@ int board_init(void)
 
 int dram_init(void)
 {
+	const fdt32_t *val;
+	int offset;
+	int len;
+
+	offset = fdt_path_offset(gd->fdt_blob, "/memory");
+	if (offset < 0)
+		return -EINVAL;
+
+	val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
+	if (len < sizeof(*val) * 4)
+		return -EINVAL;
+
+	/* Don't use fdt64_t to avoid unaligned access */
+	gd->ram_size = (uint64_t)fdt32_to_cpu(val[2]) << 32;
+	gd->ram_size |= fdt32_to_cpu(val[3]);
+
 	return 0;
 }
 
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
 void reset_cpu(ulong addr)
 {
 }
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index 8e6df12..66d9ab7 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
 CONFIG_ARCH_MESON=y
 CONFIG_MESON_GXBB=y
 CONFIG_TARGET_ODROID_C2=y
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
+CONFIG_OF_CONTROL=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
-- 
2.4.3



More information about the U-Boot mailing list