[U-Boot] [PATCH v2 26/51] x86: Update microcode for secondary CPUs
Simon Glass
sjg at chromium.org
Sat Mar 12 06:07:11 CET 2016
Each CPU needs to have its microcode loaded. Add support for this so that
all CPUs will have the same version.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Fix micrcode typo
- Don't try to update microcode on FSP platforms
arch/x86/cpu/cpu.c | 1 +
arch/x86/cpu/intel_common/car.S | 2 ++
arch/x86/cpu/mp_init.c | 6 ++++--
arch/x86/include/asm/microcode.h | 3 +++
arch/x86/lib/fsp/fsp_car.S | 2 ++
5 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 7dfe071..233a6c8 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -27,6 +27,7 @@
#include <asm/control_regs.h>
#include <asm/cpu.h>
#include <asm/lapic.h>
+#include <asm/microcode.h>
#include <asm/mp.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
diff --git a/arch/x86/cpu/intel_common/car.S b/arch/x86/cpu/intel_common/car.S
index 81ac976..6e0db96 100644
--- a/arch/x86/cpu/intel_common/car.S
+++ b/arch/x86/cpu/intel_common/car.S
@@ -237,5 +237,7 @@ mtrr_table_end:
.align 4
_dt_ucode_base_size:
/* These next two fields are filled in by ifdtool */
+.globl ucode_base
+ucode_base: /* Declared in microcode.h */
.long 0 /* microcode base */
.long 0 /* microcode size */
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 4cc6555..2604a68 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -248,8 +248,10 @@ static int load_sipi_vector(atomic_t **ap_countp, int num_cpus)
if (!stack)
return -ENOMEM;
params->stack_top = (u32)(stack + size);
-
- params->microcode_ptr = 0;
+#if !defined(CONFIG_QEMU) && !defined(CONFIG_HAVE_FSP)
+ params->microcode_ptr = ucode_base;
+ debug("Microcode at %x\n", params->microcode_ptr);
+#endif
params->msr_table_ptr = (u32)msr_save;
ret = save_bsp_msrs(msr_save, sizeof(msr_save));
if (ret < 0)
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 0478935..29bf060 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -9,6 +9,9 @@
#ifndef __ASSEMBLY__
+/* This is a declaration for ucode_base in start.S */
+extern u32 ucode_base;
+
/**
* microcode_update_intel() - Apply microcode updates
*
diff --git a/arch/x86/lib/fsp/fsp_car.S b/arch/x86/lib/fsp/fsp_car.S
index 15b3751..fbe8aef 100644
--- a/arch/x86/lib/fsp/fsp_car.S
+++ b/arch/x86/lib/fsp/fsp_car.S
@@ -102,6 +102,8 @@ temp_ram_init_romstack:
temp_ram_init_params:
_dt_ucode_base_size:
/* These next two fields are filled in by ifdtool */
+.globl ucode_base
+ucode_base: /* Declared in micrcode.h */
.long 0 /* microcode base */
.long 0 /* microcode size */
.long CONFIG_SYS_MONITOR_BASE /* code region base */
--
2.7.0.rc3.207.g0ac5344
More information about the U-Boot
mailing list