[U-Boot] [PATCH v3 1/4] dm: usb: Unbind old block devices when shutting down USB

[Simon Glass]

When 'usb start' is used, block devices are created for any USB flash sticks
and disks, etc. When 'usb stop' is used, these block devices are currently
not removed.

We don't want old block devices hanging around since they can still be
visible to U-Boot. Therefore, when USB is shut down, remove and unbind all
the block devices created by the USB subsystem.

Possibly we should unbind all devices which don't cause problems by being
unbound. Most likely we can remove everything except USB controllers, hubs
and emulators. We can consider that later.

Signed-off-by: Simon Glass <sjg at chromium.org>
Tested-by: Stephen Warren <swarren at nvidia.com>
---

Changes in v3:
- Expand the commit message

Changes in v2: None

 drivers/usb/host/usb-uclass.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
index 50538e0..69c9a50 100644
--- a/drivers/usb/host/usb-uclass.c
+++ b/drivers/usb/host/usb-uclass.c
@@ -159,7 +159,11 @@ int usb_stop(void)
 		if (ret && !err)
 			err = ret;
 	}
-
+#ifdef CONFIG_BLK
+	ret = blk_unbind_all(IF_TYPE_USB);
+	if (ret && !err)
+		err = ret;
+#endif
 #ifdef CONFIG_SANDBOX
 	struct udevice *dev;
 
-- 
2.7.0.rc3.207.g0ac5344