[U-Boot] [PATCH v4 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file
Sriram Dash
sriram.dash at nxp.com
Fri Mar 11 07:26:13 CET 2016
Move usb device-tree fixup framework from ehci-fsl.c to common place so
that it can be used by other drivers as well (xhci-fsl.c).
Signed-off-by: Ramneek Mehresh <ramneek.mehresh at nxp.com>
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
---
Changes in v4:
- Retain copywrite info
- Remove #include from fsl-dt-fixup.c which are not used currently.
Changes in v3:
- git commit -M -C to generate patches
- Break the patch 1(Moving dt fix up and removing code duplication) into 2 patches
Changes in v2:
- Remove the #defines from the patch
Makefile | 1 +
drivers/usb/common/Makefile | 6 +
.../usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} | 157 -----------------
drivers/usb/host/ehci-fsl.c | 195 ---------------------
4 files changed, 7 insertions(+), 352 deletions(-)
create mode 100644 drivers/usb/common/Makefile
copy drivers/usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} (54%)
diff --git a/Makefile b/Makefile
index fadf1a3..40ead3d 100644
--- a/Makefile
+++ b/Makefile
@@ -648,6 +648,7 @@ libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
libs-y += drivers/usb/gadget/
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 0000000..a38ee4a
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/common/fsl-dt-fixup.c
similarity index 54%
copy from drivers/usb/host/ehci-fsl.c
copy to drivers/usb/common/fsl-dt-fixup.c
index 97b7f14..92adb46 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -9,172 +9,16 @@
*/
#include <common.h>
-#include <pci.h>
#include <usb.h>
#include <asm/io.h>
-#include <usb/ehci-fsl.h>
#include <hwconfig.h>
#include <fsl_usb.h>
#include <fdt_support.h>
-#include "ehci.h"
-
#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif
-static void set_txfifothresh(struct usb_ehci *, u32);
-
-/* Check USB PHY clock valid */
-static int usb_phy_clk_valid(struct usb_ehci *ehci)
-{
- if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
- in_be32(&ehci->prictrl))) {
- printf("USB PHY clock invalid!\n");
- return 0;
- } else {
- return 1;
- }
-}
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- *
- * Excerpts from linux ehci fsl driver.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- struct usb_ehci *ehci = NULL;
- const char *phy_type = NULL;
- size_t len;
- char current_usb_controller[5];
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
- char usb_phy[5];
-
- usb_phy[0] = '\0';
-#endif
- if (has_erratum_a007075()) {
- /*
- * A 5ms delay is needed after applying soft-reset to the
- * controller to let external ULPI phy come out of reset.
- * This delay needs to be added before re-initializing
- * the controller after soft-resetting completes
- */
- mdelay(5);
- }
- memset(current_usb_controller, '\0', 5);
- snprintf(current_usb_controller, 4, "usb%d", index+1);
-
- switch (index) {
- case 0:
- ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
- break;
- case 1:
- ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB2_ADDR;
- break;
- default:
- printf("ERROR: wrong controller index!!\n");
- return -EINVAL;
- };
-
- *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr +
- HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- /* Set to Host mode */
- setbits_le32(&ehci->usbmode, CM_HOST);
-
- out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
- out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
-
- /* Init phy */
- if (hwconfig_sub(current_usb_controller, "phy_type"))
- phy_type = hwconfig_subarg(current_usb_controller,
- "phy_type", &len);
- else
- phy_type = getenv("usb_phy_type");
-
- if (!phy_type) {
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
- /* if none specified assume internal UTMI */
- strcpy(usb_phy, "utmi");
- phy_type = usb_phy;
-#else
- printf("WARNING: USB phy type not defined !!\n");
- return -1;
-#endif
- }
-
- if (!strncmp(phy_type, "utmi", 4)) {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
- clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
- PHY_CLK_SEL_UTMI);
- clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
- UTMI_PHY_EN);
- udelay(1000); /* delay required for PHY Clk to appear */
-#endif
- out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
- clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
- USB_EN);
- } else {
- clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
- PHY_CLK_SEL_ULPI);
- clrsetbits_be32(&ehci->control, UTMI_PHY_EN |
- CONTROL_REGISTER_W1C_MASK, USB_EN);
- udelay(1000); /* delay required for PHY Clk to appear */
- if (!usb_phy_clk_valid(ehci))
- return -EINVAL;
- out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
- }
-
- out_be32(&ehci->prictrl, 0x0000000c);
- out_be32(&ehci->age_cnt_limit, 0x00000040);
- out_be32(&ehci->sictrl, 0x00000001);
-
- in_le32(&ehci->usbmode);
-
- if (has_erratum_a007798())
- set_txfifothresh(ehci, TXFIFOTHRESH);
-
- if (has_erratum_a004477()) {
- /*
- * When reset is issued while any ULPI transaction is ongoing
- * then it may result to corruption of ULPI Function Control
- * Register which eventually causes phy clock to enter low
- * power mode which stops the clock. Thus delay is required
- * before reset to let ongoing ULPI transaction complete.
- */
- udelay(1);
- }
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
- return 0;
-}
-
-/*
- * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register
- * to counter DDR latencies in writing data into Tx buffer.
- * This prevents Tx buffer from getting underrun
- */
-static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
-{
- u32 cmd;
- cmd = ehci_readl(&ehci->txfilltuning);
- cmd &= ~TXFIFO_THRESH_MASK;
- cmd |= TXFIFO_THRESH(txfifo_thresh);
- ehci_writel(&ehci->txfilltuning, cmd);
-}
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
const char *phy_type, int start_offset)
{
@@ -367,4 +211,3 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
}
}
}
-#endif
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 97b7f14..ec6b8fe 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -173,198 +173,3 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
cmd |= TXFIFO_THRESH(txfifo_thresh);
ehci_writel(&ehci->txfilltuning, cmd);
}
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
- const char *phy_type, int start_offset)
-{
- const char *compat_dr = "fsl-usb2-dr";
- const char *compat_mph = "fsl-usb2-mph";
- const char *prop_mode = "dr_mode";
- const char *prop_type = "phy_type";
- const char *node_type = NULL;
- int node_offset;
- int err;
-
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset, compat_mph);
- if (node_offset < 0) {
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset,
- compat_dr);
- if (node_offset < 0) {
- printf("WARNING: could not find compatible node: %s",
- fdt_strerror(node_offset));
- return -1;
- }
- node_type = compat_dr;
- } else {
- node_type = compat_mph;
- }
-
- if (mode) {
- err = fdt_setprop(blob, node_offset, prop_mode, mode,
- strlen(mode) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, node_type, fdt_strerror(err));
- }
-
- if (phy_type) {
- err = fdt_setprop(blob, node_offset, prop_type, phy_type,
- strlen(phy_type) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, node_type, fdt_strerror(err));
- }
-
- return node_offset;
-}
-
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
- int *node_offset)
-{
- const char *compat_dr = "fsl-usb2-dr";
- const char *compat_mph = "fsl-usb2-mph";
- const char *node_type = NULL;
-
- *node_offset = fdt_node_offset_by_compatible(blob, start_offset,
- compat_mph);
- if (*node_offset < 0) {
- *node_offset = fdt_node_offset_by_compatible(blob,
- start_offset,
- compat_dr);
- if (*node_offset < 0) {
- printf("ERROR: could not find compatible node: %s\n",
- fdt_strerror(*node_offset));
- } else {
- node_type = compat_dr;
- }
- } else {
- node_type = compat_mph;
- }
-
- return node_type;
-}
-
-static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
- int start_offset)
-{
- int node_offset, err;
- const char *node_type = NULL;
-
- node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
- if (!node_type)
- return -1;
-
- err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
- if (err < 0) {
- printf("ERROR: could not set %s for %s: %s.\n",
- prop_erratum, node_type, fdt_strerror(err));
- }
-
- return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
- static const char * const modes[] = { "host", "peripheral", "otg" };
- static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
- int usb_erratum_a006261_off = -1;
- int usb_erratum_a007075_off = -1;
- int usb_erratum_a007792_off = -1;
- int usb_erratum_a005697_off = -1;
- int usb_mode_off = -1;
- int usb_phy_off = -1;
- char str[5];
- int i, j;
-
- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
- const char *dr_mode_type = NULL;
- const char *dr_phy_type = NULL;
- int mode_idx = -1, phy_idx = -1;
-
- snprintf(str, 5, "%s%d", "usb", i);
- if (hwconfig(str)) {
- for (j = 0; j < ARRAY_SIZE(modes); j++) {
- if (hwconfig_subarg_cmp(str, "dr_mode",
- modes[j])) {
- mode_idx = j;
- break;
- }
- }
-
- for (j = 0; j < ARRAY_SIZE(phys); j++) {
- if (hwconfig_subarg_cmp(str, "phy_type",
- phys[j])) {
- phy_idx = j;
- break;
- }
- }
-
- if (mode_idx < 0 && phy_idx < 0) {
- printf("WARNING: invalid phy or mode\n");
- return;
- }
-
- if (mode_idx > -1)
- dr_mode_type = modes[mode_idx];
-
- if (phy_idx > -1)
- dr_phy_type = phys[phy_idx];
- }
-
- if (has_dual_phy())
- dr_phy_type = phys[2];
-
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- dr_mode_type, NULL,
- usb_mode_off);
-
- if (usb_mode_off < 0)
- return;
-
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, dr_phy_type,
- usb_phy_off);
-
- if (usb_phy_off < 0)
- return;
-
- if (has_erratum_a006261()) {
- usb_erratum_a006261_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a006261",
- usb_erratum_a006261_off);
- if (usb_erratum_a006261_off < 0)
- return;
- }
-
- if (has_erratum_a007075()) {
- usb_erratum_a007075_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a007075",
- usb_erratum_a007075_off);
- if (usb_erratum_a007075_off < 0)
- return;
- }
-
- if (has_erratum_a007792()) {
- usb_erratum_a007792_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a007792",
- usb_erratum_a007792_off);
- if (usb_erratum_a007792_off < 0)
- return;
- }
- if (has_erratum_a005697()) {
- usb_erratum_a005697_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a005697",
- usb_erratum_a005697_off);
- if (usb_erratum_a005697_off < 0)
- return;
- }
- }
-}
-#endif
--
2.1.0
More information about the U-Boot
mailing list