[U-Boot] [PATCH v7 22/87] mtd: spi-nor: Copy spl files from drivers/mtd/spi
Jagan Teki
jteki at openedev.com
Tue Mar 22 08:37:34 CET 2016
Copy spl files from drivers/mtd/spi to spi-nor,
more changes will added on future patches.
Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
drivers/mtd/spi-nor/Makefile | 5 +++
drivers/mtd/spi-nor/fsl_espi_spl.c | 90 ++++++++++++++++++++++++++++++++++++++
drivers/mtd/spi-nor/spi_spl_load.c | 90 ++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+)
create mode 100644 drivers/mtd/spi-nor/fsl_espi_spl.c
create mode 100644 drivers/mtd/spi-nor/spi_spl_load.c
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 2f41630..4a854fa 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -3,6 +3,11 @@
#
# SPDX-License-Identifier: GPL-2.0+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o
+obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
+endif
+
ifdef CONFIG_MTD_SPI_NOR
obj-y += spi-nor.o
obj-y += spi-nor-ids.o
diff --git a/drivers/mtd/spi-nor/fsl_espi_spl.c b/drivers/mtd/spi-nor/fsl_espi_spl.c
new file mode 100644
index 0000000..b915469
--- /dev/null
+++ b/drivers/mtd/spi-nor/fsl_espi_spl.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE 0x48
+#define ESPI_BOOT_IMAGE_ADDR 0x50
+#define CONFIG_CFG_DATA_SECTOR 0
+
+void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
+{
+ struct spi_flash *flash;
+
+ flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (flash == NULL) {
+ puts("\nspi_flash_probe failed");
+ hang();
+ }
+
+ spi_flash_read(flash, offs, size, vdst);
+}
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+ void (*uboot)(void) __noreturn;
+ u32 offset, code_len, copy_len = 0;
+#ifndef CONFIG_FSL_CORENET
+ unsigned char *buf = NULL;
+#endif
+ struct spi_flash *flash;
+
+ flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (flash == NULL) {
+ puts("\nspi_flash_probe failed");
+ hang();
+ }
+
+#ifdef CONFIG_FSL_CORENET
+ offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+ code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
+#else
+ /*
+ * Load U-Boot image from SPI flash into RAM
+ */
+ buf = malloc(flash->page_size);
+ if (buf == NULL) {
+ puts("\nmalloc failed");
+ hang();
+ }
+ memset(buf, 0, flash->page_size);
+
+ spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+ flash->page_size, (void *)buf);
+ offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+ /* Skip spl code */
+ offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+ /* Get the code size from offset 0x48 */
+ code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+ /* Skip spl code */
+ code_len = code_len - CONFIG_SPL_MAX_SIZE;
+#endif
+ /* copy code to DDR */
+ printf("Loading second stage boot loader ");
+ while (copy_len <= code_len) {
+ spi_flash_read(flash, offset + copy_len, 0x2000,
+ (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST
+ + copy_len));
+ copy_len = copy_len + 0x2000;
+ putc('.');
+ }
+
+ /*
+ * Jump to U-Boot image
+ */
+ flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+ uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+ (*uboot)();
+}
diff --git a/drivers/mtd/spi-nor/spi_spl_load.c b/drivers/mtd/spi-nor/spi_spl_load.c
new file mode 100644
index 0000000..ca56fe9
--- /dev/null
+++ b/drivers/mtd/spi-nor/spi_spl_load.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2011 OMICRON electronics GmbH
+ *
+ * based on drivers/mtd/nand/nand_spl_load.c
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <errno.h>
+#include <spl.h>
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Load the kernel, check for a valid header we can parse, and if found load
+ * the kernel and then device tree.
+ */
+static int spi_load_image_os(struct spi_flash *flash,
+ struct image_header *header)
+{
+ /* Read for a header, parse or error out. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
+ (void *)header);
+
+ if (image_get_magic(header) != IH_MAGIC)
+ return -1;
+
+ spl_parse_image_header(header);
+
+ spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+
+ /* Read device tree. */
+ spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
+ CONFIG_SYS_SPI_ARGS_SIZE,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR);
+
+ return 0;
+}
+#endif
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+int spl_spi_load_image(void)
+{
+ int err = 0;
+ struct spi_flash *flash;
+ struct image_header *header;
+
+ /*
+ * Load U-Boot image from SPI flash into RAM
+ */
+
+ flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+ CONFIG_SF_DEFAULT_CS,
+ CONFIG_SF_DEFAULT_SPEED,
+ CONFIG_SF_DEFAULT_MODE);
+ if (!flash) {
+ puts("SPI probe failed.\n");
+ return -ENODEV;
+ }
+
+ /* use CONFIG_SYS_TEXT_BASE as temporary storage area */
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || spi_load_image_os(flash, header))
+#endif
+ {
+ /* Load u-boot, mkimage header is 64 bytes. */
+ err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+ (void *)header);
+ if (err)
+ return err;
+
+ spl_parse_image_header(header);
+ err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+ }
+
+ return err;
+}
--
1.9.1
More information about the U-Boot
mailing list