[U-Boot] [PATCH v7 68/87] spi: Drop mode_rx
Jagan Teki
jteki at openedev.com
Tue Mar 22 08:38:20 CET 2016
mp2580 will take care of tx and rx mode's so there is
no need to differentiate these into spi layer level
hence replaced all mode_rx macros with mode.
Cc: Simon Glass <sjg at chromium.org>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Mugunthan V N <mugunthanvnm at ti.com>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Jagan Teki <jteki at openedev.com>
---
drivers/mtd/spi-nor/m25p80.c | 19 +++++--------------
drivers/spi/ich.c | 6 ++----
drivers/spi/spi-uclass.c | 11 ++++-------
drivers/spi/ti_qspi.c | 6 +++---
include/spi.h | 14 ++++----------
5 files changed, 18 insertions(+), 38 deletions(-)
diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
index 429d710..bf9fe02 100644
--- a/drivers/mtd/spi-nor/m25p80.c
+++ b/drivers/mtd/spi-nor/m25p80.c
@@ -187,26 +187,17 @@ static int m25p80_spi_nor(struct spi_nor *nor)
return ret;
}
- switch (spi->mode_rx) {
- case SPI_RX_SLOW:
+ if (spi->mode & SPI_RX_SLOW)
nor->read_mode = SNOR_READ;
- break;
- case SPI_RX_DUAL:
+ else if (spi->mode & SPI_RX_DUAL)
nor->read_mode = SNOR_READ_1_1_2;
- break;
- case SPI_RX_QUAD:
+ else if (spi->mode & SPI_RX_QUAD)
nor->read_mode = SNOR_READ_1_1_4;
- break;
- }
- switch (spi->mode) {
- case SPI_TX_BYTE:
+ if (spi->mode & SPI_TX_BYTE)
nor->mode = SNOR_WRITE_1_1_BYTE;
- break;
- case SPI_TX_QUAD:
+ else if (spi->mode & SPI_TX_QUAD)
nor->mode = SNOR_WRITE_1_1_4;
- break;
- }
nor->memory_map = spi->memory_map;
nor->max_write_size = spi->max_write_size;
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index 00b2fed..a89f859 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -649,10 +649,8 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
* ICH 7 SPI controller only supports array read command
* and byte program command for SST flash
*/
- if (plat->ich_version == ICHV_7) {
- slave->mode_rx = SPI_RX_SLOW;
- slave->mode = SPI_TX_BYTE;
- }
+ if (plat->ich_version == ICHV_7)
+ slave->mode = SPI_TX_BYTE | SPI_RX_SLOW;
return 0;
}
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 7ef2496..0e52ac8 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -181,7 +181,6 @@ static int spi_child_pre_probe(struct udevice *dev)
slave->max_hz = plat->max_hz;
slave->mode = plat->mode;
- slave->mode_rx = plat->mode_rx;
slave->wordlen = SPI_DEFAULT_WORDLEN;
return 0;
@@ -394,7 +393,7 @@ void spi_free_slave(struct spi_slave *slave)
int spi_slave_ofdata_to_platdata(const void *blob, int node,
struct dm_spi_slave_platdata *plat)
{
- int mode = 0, mode_rx = 0;
+ int mode = 0;
int value;
plat->cs = fdtdec_get_int(blob, node, "reg", -1);
@@ -426,24 +425,22 @@ int spi_slave_ofdata_to_platdata(const void *blob, int node,
break;
}
- plat->mode = mode;
-
value = fdtdec_get_uint(blob, node, "spi-rx-bus-width", 1);
switch (value) {
case 1:
break;
case 2:
- mode_rx |= SPI_RX_DUAL;
+ mode |= SPI_RX_DUAL;
break;
case 4:
- mode_rx |= SPI_RX_QUAD;
+ mode |= SPI_RX_QUAD;
break;
default:
error("spi-rx-bus-width %d not supported\n", value);
break;
}
- plat->mode_rx = mode_rx;
+ plat->mode = mode;
return 0;
}
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index e69ec0d..de687d1 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -338,7 +338,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
QSPI_SETUP0_NUM_D_BYTES_8_BITS |
QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
QSPI_NUM_DUMMY_BITS);
- slave->mode_rx = SPI_RX_QUAD;
+ slave->mode |= SPI_RX_QUAD;
#else
memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
@@ -422,7 +422,7 @@ static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
bool enable)
{
u32 memval;
- u32 mode = slave->mode_rx & (SPI_RX_QUAD | SPI_RX_DUAL);
+ u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
if (!enable) {
writel(0, &priv->base->setup0);
@@ -436,7 +436,7 @@ static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
memval |= QSPI_CMD_READ_QUAD;
memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
memval |= QSPI_SETUP0_READ_QUAD;
- slave->mode_rx = SPI_RX_QUAD;
+ slave->mode |= SPI_RX_QUAD;
break;
case SPI_RX_DUAL:
memval |= QSPI_CMD_READ_DUAL;
diff --git a/include/spi.h b/include/spi.h
index dd0b11b..61fefa4 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -26,12 +26,10 @@
#define SPI_TX_BYTE BIT(8) /* transmit with 1 wire byte */
#define SPI_TX_DUAL BIT(9) /* transmit with 2 wires */
#define SPI_TX_QUAD BIT(10) /* transmit with 4 wires */
-
-/* SPI mode_rx flags */
-#define SPI_RX_SLOW BIT(0) /* receive with 1 wire slow */
-#define SPI_RX_FAST BIT(1) /* receive with 1 wire fast */
-#define SPI_RX_DUAL BIT(2) /* receive with 2 wires */
-#define SPI_RX_QUAD BIT(3) /* receive with 4 wires */
+#define SPI_RX_SLOW BIT(11) /* receive with 1 wire slow */
+#define SPI_RX_FAST BIT(12) /* receive with 1 wire fast */
+#define SPI_RX_DUAL BIT(13) /* receive with 2 wires */
+#define SPI_RX_QUAD BIT(14) /* receive with 4 wires */
/* SPI bus connection options - see enum spi_dual_flash */
#define SPI_CONN_DUAL_SHARED (1 << 0)
@@ -61,13 +59,11 @@ struct dm_spi_bus {
* @cs: Chip select number (0..n-1)
* @max_hz: Maximum bus speed that this slave can tolerate
* @mode: SPI mode to use for this device (see SPI mode flags)
- * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags)
*/
struct dm_spi_slave_platdata {
unsigned int cs;
uint max_hz;
uint mode;
- u8 mode_rx;
};
#endif /* CONFIG_DM_SPI */
@@ -94,7 +90,6 @@ struct dm_spi_slave_platdata {
* bus (bus->seq) so does not need to be stored
* @cs: ID of the chip select connected to the slave.
* @mode: SPI mode to use for this slave (see SPI mode flags)
- * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags)
* @wordlen: Size of SPI word in number of bits
* @max_write_size: If non-zero, the maximum number of bytes which can
* be written at once, excluding command bytes.
@@ -112,7 +107,6 @@ struct spi_slave {
unsigned int cs;
#endif
uint mode;
- u8 mode_rx;
unsigned int wordlen;
unsigned int max_write_size;
void *memory_map;
--
1.9.1
More information about the U-Boot
mailing list