[U-Boot] [PATCH V3] fsl: esdhc: support driver model
Eric Nelson
eric at nelint.com
Sun Mar 27 20:18:00 CEST 2016
Hi Peng,
On 03/27/2016 07:57 AM, Peng Fan wrote:
> On Fri, Mar 25, 2016 at 01:12:39PM -0700, Eric Nelson wrote:
>> On 03/24/2016 11:16 PM, Peng Fan wrote:
>>> Support Driver Model for fsl esdhc driver.
>>>
>>> 1. Introduce a new structure struct fsl_esdhc_priv
>>> 2. Refactor fsl_esdhc_initialize which is originally used by board code.
>>> - Introduce fsl_esdhc_init to be common usage for DM and non-DM
>>> - Introduce fsl_esdhc_cfg_to_priv to build the bridge for non-DM part.
>>> - The original API for board code is still there, but we use
>>> 'fsl_esdhc_cfg_to_priv' and 'fsl_esdhc_init' to serve it.
>>> 3. All the functions are changed to use 'struct fsl_esdhc_priv', except
>>> fsl_esdhc_initialize.
>>> 4. Since clk driver is not implemented, use mxc_get_clock to geth
>>> the clk and fill 'priv->sdhc_clk'.
>>>
>>> Has been tested on i.MX6UL 14X14 EVK board:
>>> "
>>> =>dm tree
>>> ....
>>> simple_bus [ + ] | `-- aips-bus at 02100000
>>> mmc [ + ] | |-- usdhc at 02190000
>>> mmc [ + ] | |-- usdhc at 02194000
>>> ....
>>> => mmc list
>>> FSL_SDHC: 0 (SD)
>>> FSL_SDHC: 1 (SD)
>>> "
>>>
>>
>> After pulling in device tree files from the mainline kernel, I was able
>> to test this on a SABRE Lite, so you can add my:
>>
>> Tested-By: Eric Nelson <eric at nelint.com>
>
> Thanks, Eric.
>
Thank you for adding this support.
>>
>> Is somebody prepping patches to pull in support for i.MX6DQ?
>
> I can not follow you on this? you mean adding dts files for i.MX6DQ or else?
>
Yes, or at least the .dtsi and .h files from arch/arm/boot/dts/.
Your i.MX6UL patch pulled in the files needed for UL, and the same
is needed for i.MX6DQ, i.MX6SX and such.
I have a patch pulling i.MX6DQ files from linux-stable (4.4), but
don't want to jump in the middle if somebody else is doing this.
Regards,
Eric
More information about the U-Boot
mailing list