[U-Boot] [PATCH v2] x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support

[Bin Meng]

On Wed, Mar 16, 2016 at 3:48 PM, Stefan Roese <sr at denx.de> wrote:
> This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
> installed on the congatec Qseven 2.0 evaluation carrier board
> (conga-QEVAL).
>
> Its port is very similar to the MinnowboardMAX port and also uses
> the Intel FSP as described in doc/README.x86.
>
> Currently supported are the following interfaces / devices:
> - UART (via Winbond legacy SuperIO chip on carrier board)
> - Ethernet (PCIe Intel I210 / E1000)
> - SPI including SPI NOR as boot-device
> - USB 2.0
> - SATA via U-Boot SCSI IF
> - eMMC
> - Video (HDMI output @ 800x600)
> - PCIe
>
> Not supported yet is:
> - I2C
> - USB 3.0
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Bin Meng <bmeng.cn at gmail.com>
> ---
> v2:
> - Rebased on u-boot-x86/master
> - Fixed spelling of Bay Trail in commit subject
> - Removed unreferenced CONFIG_WINBOND from config header
> - Moved Intel E1000 from config header to defconfig
>
>  arch/x86/Kconfig                                   |   4 +
>  arch/x86/dts/Makefile                              |   1 +
>  arch/x86/dts/conga-qeval20-qa3-e3845.dts           | 278 +++++++++++++++++++++
>  board/congatec/Kconfig                             |  29 +++
>  board/congatec/conga-qeval20-qa3-e3845/Kconfig     |  28 +++
>  board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS |   7 +
>  board/congatec/conga-qeval20-qa3-e3845/Makefile    |   7 +
>  .../conga-qeval20-qa3-e3845/conga-qeval20-qa3.c    |  31 +++
>  board/congatec/conga-qeval20-qa3-e3845/start.S     |   9 +
>  configs/conga-qeval20-qa3-e3845_defconfig          |  47 ++++
>  include/configs/conga-qeval20-qa3-e3845.h          |  65 +++++
>  11 files changed, 506 insertions(+)
>  create mode 100644 arch/x86/dts/conga-qeval20-qa3-e3845.dts
>  create mode 100644 board/congatec/Kconfig
>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Kconfig
>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Makefile
>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c
>  create mode 100644 board/congatec/conga-qeval20-qa3-e3845/start.S
>  create mode 100644 configs/conga-qeval20-qa3-e3845_defconfig
>  create mode 100644 include/configs/conga-qeval20-qa3-e3845.h
>

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>