[U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support
york sun
york.sun at nxp.com
Tue Mar 22 20:08:38 CET 2016
On 03/06/2016 11:56 PM, Yuan Yao wrote:
> From: Yuan Yao <yao.yuan at nxp.com>
>
> This series add support for QSPI boot on LS2080AQDS.
>
> Yuan Yao (11):
> armv8: ls2080aqds: Select QSPI CLK div via SCFG
> configs: ls2080a_common: Remove duplicate NOR configs
> configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
> configs: ls2080aqds: Enable QSPI flash support
> dm: dts: ls2080aqds: Add QSPI dts node
> armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
> configs: ls2080a: Increase load image len in NAND boot
> ls2080aqds_nand_defconfig: Enable QSPI & its dependence
> armv8: ls2080aqds: Enable QSPI boot support
> Changed in v2:
> merged the patch:
> 0009-armv8-ls2080aqds-Enable-QSPI-boot-support.patch
> 0010-ls2080aqds-Enable-support-for-boot-from-QSPI.patch
> 0012-LS2080QDS-QSPI-boot-fix-issues.patch
> in this patch.
> board/ls2080qds: add the procedure to deply QSPI image.
> New add in v2.
> freescale: cmd: qixis: tidy up the duplicated code
>
> arch/arm/dts/fsl-ls2080a-qds.dts | 14 +++++++
> arch/arm/dts/fsl-ls2080a.dtsi | 10 +++++
> arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 ++
> .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 3 ++
> board/freescale/common/qixis.c | 12 ++----
> board/freescale/ls2080aqds/README | 35 ++++++++++++++++++
> board/freescale/ls2080aqds/ls2080aqds.c | 16 ++++++++
> common/board_f.c | 6 +--
> configs/ls2080aqds_nand_defconfig | 9 +++++
> configs/ls2080aqds_qspi_defconfig | 10 +++++
> include/configs/ls2080a_common.h | 11 ++----
> include/configs/ls2080a_simu.h | 7 ++++
> include/configs/ls2080aqds.h | 43 +++++++++++++++++++++-
> 13 files changed, 159 insertions(+), 21 deletions(-)
> create mode 100644 configs/ls2080aqds_qspi_defconfig
>
Yuan,
This set was sent before Jagan's comment on your v1 patch. Please let me know if
you need to update your patches.
York
More information about the U-Boot
mailing list