[U-Boot] [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY framework
Prabhakar Kushwaha
prabhakar.kushwaha at nxp.com
Tue Mar 8 03:36:44 CET 2016
Hi Joe,
I have incorporated your review comments on this patch.
Please review it and let me know if any other changes are required.
Regards,
Prabhakar
> -----Original Message-----
> From: Prabhakar Kushwaha [mailto:prabhakar.kushwaha at nxp.com]
> Sent: Wednesday, February 24, 2016 5:02 PM
> To: u-boot at lists.denx.de
> Cc: joe.hershberger at gmail.com; york sun <york.sun at nxp.com>; Prabhakar
> Kushwaha <prabhakar.kushwaha at nxp.com>; Pratiyush Srivastava
> <pratiyush.srivastava at nxp.com>
> Subject: [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY
> framework
>
> This patch integrate DPAA2 ethernet driver existing PHY framework.
>
> Call phy_connect and phy_config as per available DPMAC id defined in
> SerDes Protcol.
>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava at nxp.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> ---
> Changes for v2: Incorporated Joe Hershberger's comments
>
> drivers/net/ldpaa_eth/ldpaa_eth.c | 121
> +++++++++++++++++++++++++++-----------
> 1 file changed, 87 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c
> b/drivers/net/ldpaa_eth/ldpaa_eth.c
> index 7f96883..8a00bc3 100644
> --- a/drivers/net/ldpaa_eth/ldpaa_eth.c
> +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
> @@ -14,15 +14,32 @@
> #include <linux/compat.h>
> #include <fsl-mc/fsl_dpmac.h>
>
> +#include <fsl-mc/ldpaa_wriop.h>
> #include "ldpaa_eth.h"
>
> -#undef CONFIG_PHYLIB
> +#ifdef CONFIG_PHYLIB
> static int init_phy(struct eth_device *dev) {
> - /*TODO for external PHY */
> + struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv;
> + struct phy_device *phydev = NULL;
> + struct mii_dev *bus;
>
> - return 0;
> + bus = wriop_get_mdio(priv->dpmac_id);
> + if (bus == NULL)
> + return 0;
> +
> + phydev = phy_connect(bus, wriop_get_phy_address(priv-
> >dpmac_id),
> + dev, wriop_get_enet_if(priv->dpmac_id));
> + if (!phydev) {
> + printf("Failed to connect\n");
> + return -1;
> + }
> +
> + priv->phydev = phydev;
> +
> + return phy_config(phydev);
> }
> +#endif
>
> #ifdef DEBUG
> static void ldpaa_eth_get_dpni_counter(void) @@ -380,7 +397,9 @@ static
> int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) #ifdef DEBUG
> struct dpni_link_state link_state;
> #endif
> - int err;
> + int err = 0;
> + struct mii_dev *bus;
> + phy_interface_t enet_if;
>
> if (net_dev->state == ETH_STATE_ACTIVE)
> return 0;
> @@ -394,11 +413,48 @@ static int ldpaa_eth_open(struct eth_device
> *net_dev, bd_t *bd)
> printf("ERROR (DPL is deployed. No device available)\n");
> return -ENODEV;
> }
> +
> /* DPMAC initialization */
> err = ldpaa_dpmac_setup(priv);
> if (err < 0)
> goto err_dpmac_setup;
>
> +#ifdef CONFIG_PHYLIB
> + if (priv->phydev)
> + err = phy_startup(priv->phydev);
> + if (err) {
> + printf("%s: Could not initialize\n",
> + priv->phydev->dev->name);
> + goto err_dpamc_bind;
> + }
> +#else
> + priv->phydev = (struct phy_device *)malloc(sizeof(struct
> phy_device));
> + memset(priv->phydev, 0, sizeof(struct phy_device));
> +
> + priv->phydev->speed = SPEED_1000;
> + priv->phydev->link = 1;
> + priv->phydev->duplex = DUPLEX_FULL;
> +#endif
> +
> + bus = wriop_get_mdio(priv->dpmac_id);
> + enet_if = wriop_get_enet_if(priv->dpmac_id);
> + if ((bus == NULL) &&
> + (enet_if == PHY_INTERFACE_MODE_XGMII)) {
> + priv->phydev = (struct phy_device *)
> + malloc(sizeof(struct phy_device));
> + memset(priv->phydev, 0, sizeof(struct phy_device));
> +
> + priv->phydev->speed = SPEED_10000;
> + priv->phydev->link = 1;
> + priv->phydev->duplex = DUPLEX_FULL;
> + }
> +
> + if (!priv->phydev->link) {
> + printf("%s: No link.\n", priv->phydev->dev->name);
> + err = -1;
> + goto err_dpamc_bind;
> + }
> +
> /* DPMAC binding DPNI */
> err = ldpaa_dpmac_bind(priv);
> if (err)
> @@ -425,28 +481,24 @@ static int ldpaa_eth_open(struct eth_device
> *net_dev, bd_t *bd)
> return err;
> }
>
> -#ifdef CONFIG_PHYLIB
> - /* TODO Check this path */
> - err = phy_startup(priv->phydev);
> - if (err) {
> - printf("%s: Could not initialize\n", priv->phydev->dev-
> >name);
> - return err;
> - }
> -#else
> - priv->phydev->speed = SPEED_1000;
> - priv->phydev->link = 1;
> - priv->phydev->duplex = DUPLEX_FULL;
> -#endif
> -
> err = dpni_enable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni-
> >dpni_handle);
> if (err < 0) {
> printf("dpni_enable() failed\n");
> return err;
> }
>
> - dpmac_link_state.rate = SPEED_1000;
> - dpmac_link_state.options = DPMAC_LINK_OPT_AUTONEG;
> - dpmac_link_state.up = 1;
> + dpmac_link_state.rate = priv->phydev->speed;
> +
> + if (priv->phydev->autoneg == AUTONEG_DISABLE)
> + dpmac_link_state.options &=
> ~DPMAC_LINK_OPT_AUTONEG;
> + else
> + dpmac_link_state.options |= DPMAC_LINK_OPT_AUTONEG;
> +
> + if (priv->phydev->duplex == DUPLEX_HALF)
> + dpmac_link_state.options |=
> DPMAC_LINK_OPT_HALF_DUPLEX;
> +
> + dpmac_link_state.up = priv->phydev->link;
> +
> err = dpmac_set_link_state(dflt_mc_io, MC_CMD_NO_FLAGS,
> priv->dpmac_handle, &dpmac_link_state);
> if (err < 0) {
> @@ -484,10 +536,7 @@ static int ldpaa_eth_open(struct eth_device
> *net_dev, bd_t *bd)
> goto err_qdid;
> }
>
> - if (!priv->phydev->link)
> - printf("%s: No link.\n", priv->phydev->dev->name);
> -
> - return priv->phydev->link ? 0 : -1;
> + return priv->phydev->link;
>
> err_qdid:
> err_rx_flow:
> @@ -495,9 +544,10 @@ err_rx_flow:
> err_dpni_bind:
> ldpaa_dpbp_free();
> err_dpbp_setup:
> -err_dpamc_bind:
> dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpni-
> >dpni_handle);
> err_dpni_setup:
> +err_dpamc_bind:
> + dpmac_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, priv-
> >dpmac_handle);
> err_dpmac_setup:
> return err;
> }
> @@ -506,6 +556,9 @@ static void ldpaa_eth_stop(struct eth_device
> *net_dev) {
> struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev-
> >priv;
> int err = 0;
> +#ifdef CONFIG_PHYLIB
> + struct mii_dev *bus = wriop_get_mdio(priv->dpmac_id); #endif
>
> if ((net_dev->state == ETH_STATE_PASSIVE) ||
> (net_dev->state == ETH_STATE_INIT)) @@ -531,7 +584,10 @@
> static void ldpaa_eth_stop(struct eth_device *net_dev)
> printf("dpni_disable() failed\n");
>
> #ifdef CONFIG_PHYLIB
> - phy_shutdown(priv->phydev);
> + if (priv->phydev && bus != NULL)
> + phy_shutdown(priv->phydev);
> + else
> + free(priv->phydev);
> #endif
>
> ldpaa_dpbp_free();
> @@ -914,15 +970,12 @@ static int ldpaa_eth_netdev_init(struct eth_device
> *net_dev,
> net_dev->halt = ldpaa_eth_stop;
> net_dev->send = ldpaa_eth_tx;
> net_dev->recv = ldpaa_eth_pull_dequeue_rx;
> -/*
> - TODO: PHY MDIO information
> - priv->bus = info->bus;
> - priv->phyaddr = info->phy_addr;
> - priv->enet_if = info->enet_if;
> -*/
>
> - if (init_phy(net_dev))
> - return 0;
> +#ifdef CONFIG_PHYLIB
> + err = init_phy(net_dev);
> + if (err < 0)
> + return err;
> +#endif
>
> err = eth_register(net_dev);
> if (err < 0) {
> --
> 1.9.1
>
More information about the U-Boot
mailing list