[U-Boot] [PATCH RFC 02/17] power: axp818: Fix DCDC5 default voltage

[Chen-Yu Tsai]

DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3,
1.35V for DDR3L, and 1.2V for LPDDR3.

Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 configs/h8_homlet_v2_defconfig | 1 -
 drivers/power/Kconfig          | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig
index 4742aaf6..1f492ab 100644
--- a/configs/h8_homlet_v2_defconfig
+++ b/configs/h8_homlet_v2_defconfig
@@ -12,4 +12,3 @@ CONFIG_SPL=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_AXP_DCDC1_VOLT=3000
-CONFIG_AXP_DCDC5_VOLT=1500
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index adc6455..548fe26 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -118,13 +118,12 @@ config AXP_DCDC4_VOLT
 config AXP_DCDC5_VOLT
 	int "axp pmic dcdc5 voltage"
 	depends on AXP221_POWER || AXP818_POWER
-	default 1800 if AXP818_POWER
 	default 1500 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
 	disable dcdc5.
 	On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
-	1.8V for A83T.
+	1.35V if DDR3L is used.
 
 config AXP_ALDO1_VOLT
 	int "axp pmic (a)ldo1 voltage"
-- 
2.7.0