[U-Boot] [PATCH v5 06/14] fsl: ls-ch3: Copy Bootscript and header from NOR to DDR

[York Sun]

On 03/22/2016 10:41 PM, Saksham Jain wrote:
> During Secure Boot, a bootscript is validated using its header. This
> patch copies both these images to DDR from NOR and then validates and
> executed them from DDR. (If NOR is the boot source for LS2080).
> 
> This copy step is done to make this step common across booting sources.
> Because in case of non-xip memories (e.g. NAND, SD) it is neccessary to
> copy both these images to DDR.
> 
> For other ARM Platforms (ls1043 and ls1020), header is not copied from
> NOR to DDR (otherwise customers will need to modify the existing
> headers).
> 
> Signed-off-by: Aneesh Bansal <aneesh.bansal at nxp.com>
> Signed-off-by: Saksham Jain <saksham.jain at nxp.com>
> ---
> Changes for v2:
> 	- for platform such as ls1043 and ls1021, boot header in NOR.
> 		Not copied to NOR. For them, fixed CONFIG_BOOTSCRIPT_HDR_ADDR
> 		to CONFIG_BS_HDR_ADDR_FLASH.
> Changes for v3:
> 	- No change
> Changes for v4:
> 	-Cleaned up commit message
> Changes for v5:
> 	- Cleaned up commit message
> 
> 
>  arch/arm/include/asm/fsl_secure_boot.h | 28 +++++++++++++++++++++++++---
>  include/config_fsl_chain_trust.h       | 11 +++++++----
>  2 files changed, 32 insertions(+), 7 deletions(-)
> 


Change to subject and commit message.

Applied to u-boot-fsl-qoriq master. Awaiting upstream.

Thanks.

York