[U-Boot] [GIT PULL v2] Xilinx changes
Tom Rini
trini at konsulko.com
Tue May 24 17:55:50 CEST 2016
On Tue, May 24, 2016 at 01:36:42PM +0200, Michal Simek wrote:
> Hi Tom,
>
> here are patches I have collected. I expect some others changes will
> come after that.
> I have fixed one MB compilation issue in v2 (just missing one variable).
> Sorry for that.
>
> Thanks,
> Michal
>
>
>
> The following changes since commit
> d7d000311285e4b8d11e089ca13ea456a01be3b8:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-23
> 11:51:37 -0400)
>
> are available in the git repository at:
>
>
> git://www.denx.de/git/u-boot-microblaze.git master
>
> for you to fetch changes up to ad5b5801264e573bfbf17a20b04c546985c5bfc1:
>
> ARM: zynq: Simplify zynq configuration (2016-05-24 13:22:50 +0200)
>
> ----------------------------------------------------------------
> Alexander Graf (1):
> ARM64: zynqmp: Align gic ranges for 64k in device tree
>
> Masahiro Yamada (2):
> ARM: zynq: load u-boot.img whether CONFIG_OF_SEPARATE is defined
> or not
> ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
>
> Michal Simek (27):
> gpio: zynq: Add support for reading gpio pin state
> ARM64: zynqmp: Enable HUSH parser for all zynqmp targets
> ARM64: zynqmp: Enable missing distro default options
> ARM64: zynqmp: Add support for reading MAC from eeprom
> ARM64: zynqmp: Enable eMMC boot partitions commands
> ARM64: zynqmp: Wire up debug_uart setup
> ARM: zynq: Add support for SPL_LOAD_FIT
> ARM64: zynqmp: Remove CONFIG_PREBOOT
> ARM64: zynqmp: Enable SPI_FLASH and FLASH_BAR for ep108
> ARM64: zynqmp: Add debug uart for zc1751-dc1
> spl: Introduce new function spl_board_prepare_for_boot
> ARM64: zynqmp: Enable option to overwrite default variables
> ARM: zynq: Call ps7_post_config() for SPL
> SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode
> tools: zynqmpimage: Add Xilinx ZynqMP boot header generation
> ARM64: zynqmp: Add missing u-boot,dm-pre-reloc to DTSI
> ARM64: zynqmp: Add SPL support support
> ARM64: zynqmp: Enable CLK framework
> fpga: Fix typo in function comment
> mkimage: Report information about fpga
> net: xilinx: Handle error value from phy_startup()
> phy: Return correct error code when timeout happens
> net: phy: Handle phy_startup() error codes properly
> image: Add boot_get_fpga() to load fpga with bootm
> phy: Wire return value from phy_config()
> phy: marvell: Do not reset phy after negotiation
> ARM: zynq: Simplify zynq configuration
>
> arch/arm/Kconfig
> | 1 +
> arch/arm/cpu/armv8/zynqmp/Makefile
> | 1 +
> arch/arm/cpu/armv8/zynqmp/spl.c
> | 107 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/zynq-7000.dtsi
> | 2 +-
> arch/arm/dts/zynqmp.dtsi
> | 9 ++++-
> arch/arm/include/asm/arch-zynqmp/sys_proto.h
> | 2 +
> arch/arm/mach-zynq/Kconfig
> | 48 +++---------------------
> arch/arm/mach-zynq/spl.c
> | 25 +++++++++++++
> board/xilinx/zynq/Makefile
> | 12 +-----
> board/xilinx/zynq/custom_hw_platform/.gitignore
> | 1 -
> board/xilinx/zynq/{MicroZed_hw_platform =>
> zynq-microzed}/ps7_init_gpl.c | 0
> board/xilinx/zynq/{MicroZed_hw_platform =>
> zynq-microzed}/ps7_init_gpl.h | 0
> board/xilinx/zynq/{ZC702_hw_platform => zynq-zc702}/ps7_init_gpl.c
> | 0
> board/xilinx/zynq/{ZC702_hw_platform => zynq-zc702}/ps7_init_gpl.h
> | 0
> board/xilinx/zynq/{ZC706_hw_platform => zynq-zc706}/ps7_init_gpl.c
> | 0
> board/xilinx/zynq/{ZC706_hw_platform => zynq-zc706}/ps7_init_gpl.h
> | 0
> board/xilinx/zynq/{zed_hw_platform => zynq-zed}/ps7_init_gpl.c
> | 0
> board/xilinx/zynq/{zed_hw_platform => zynq-zed}/ps7_init_gpl.h
> | 0
> board/xilinx/zynq/{zybo_hw_platform => zynq-zybo}/ps7_init_gpl.c
> | 0
> board/xilinx/zynq/{zybo_hw_platform => zynq-zybo}/ps7_init_gpl.h
> | 0
> board/xilinx/zynqmp/Makefile
> | 23 +++++++++++-
> board/xilinx/zynqmp/xil_io.h
> | 35 ++++++++++++++++++
> board/xilinx/zynqmp/zynqmp.c
> | 17 +++++++++
> common/bootm.c
> | 10 +++++
> common/image-fit.c
> | 11 +++++-
> common/image.c
> | 94 ++++++++++++++++++++++++++++++++++++++++++++++
> common/spl/spl.c
> | 51 ++++++++++++++++++++-----
> configs/xilinx_zynqmp_ep_defconfig
> | 9 +++++
> configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
> | 8 ++++
> configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
> | 3 ++
> configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
> | 3 ++
> configs/xilinx_zynqmp_zcu102_defconfig
> | 8 ++++
> configs/xilinx_zynqmp_zcu102_revB_defconfig
> | 8 ++++
> configs/zynq_microzed_defconfig
> | 2 +-
> configs/zynq_picozed_defconfig
> | 2 +-
> configs/zynq_zc702_defconfig
> | 1 +
> configs/zynq_zc706_defconfig
> | 2 +-
> configs/zynq_zc770_xm010_defconfig
> | 2 +-
> configs/zynq_zc770_xm011_defconfig
> | 2 +-
> configs/zynq_zc770_xm012_defconfig
> | 2 +-
> configs/zynq_zc770_xm013_defconfig
> | 2 +-
> configs/zynq_zed_defconfig
> | 2 +-
> configs/zynq_zybo_defconfig
> | 2 +-
> doc/uImage.FIT/multi-with-fpga.its
> | 67 +++++++++++++++++++++++++++++++++
> doc/uImage.FIT/source_file_format.txt
> | 3 ++
> drivers/fpga/fpga.c
> | 2 +-
> drivers/gpio/zynq_gpio.c
> | 22 +++++++++++
> drivers/net/phy/broadcom.c
> | 34 +++++++++++------
> drivers/net/phy/davicom.c
> | 9 +++--
> drivers/net/phy/et1011c.c
> | 10 +++--
> drivers/net/phy/lxt.c
> | 9 +++--
> drivers/net/phy/marvell.c
> | 39 ++++++++++---------
> drivers/net/phy/micrel.c
> | 7 +++-
> drivers/net/phy/natsemi.c
> | 18 ++++++---
> drivers/net/phy/phy.c
> | 15 ++++----
> drivers/net/phy/realtek.c
> | 28 +++++++++-----
> drivers/net/phy/smsc.c
> | 10 +++--
> drivers/net/phy/vitesse.c
> | 8 ++--
> drivers/net/xilinx_emaclite.c
> | 6 ++-
> drivers/net/zynq_gem.c
> | 8 ++--
> include/bootstage.h
> | 1 +
> include/configs/xilinx_zynqmp.h
> | 59 ++++++++++++++++++++++++++++-
> include/configs/xilinx_zynqmp_zcu102.h
> | 6 +++
> include/configs/zynq-common.h
> | 6 +--
> include/image.h
> | 7 +++-
> include/spl.h
> | 1 +
> scripts/Makefile.spl
> | 7 ++++
> tools/Makefile
> | 1 +
> tools/zynqmpimage.c
> | 269
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 69 files changed, 1000 insertions(+), 159 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/zynqmp/spl.c
> delete mode 100644 board/xilinx/zynq/custom_hw_platform/.gitignore
> rename board/xilinx/zynq/{MicroZed_hw_platform =>
> zynq-microzed}/ps7_init_gpl.c (100%)
> rename board/xilinx/zynq/{MicroZed_hw_platform =>
> zynq-microzed}/ps7_init_gpl.h (100%)
> rename board/xilinx/zynq/{ZC702_hw_platform =>
> zynq-zc702}/ps7_init_gpl.c (100%)
> rename board/xilinx/zynq/{ZC702_hw_platform =>
> zynq-zc702}/ps7_init_gpl.h (100%)
> rename board/xilinx/zynq/{ZC706_hw_platform =>
> zynq-zc706}/ps7_init_gpl.c (100%)
> rename board/xilinx/zynq/{ZC706_hw_platform =>
> zynq-zc706}/ps7_init_gpl.h (100%)
> rename board/xilinx/zynq/{zed_hw_platform => zynq-zed}/ps7_init_gpl.c
> (100%)
> rename board/xilinx/zynq/{zed_hw_platform => zynq-zed}/ps7_init_gpl.h
> (100%)
> rename board/xilinx/zynq/{zybo_hw_platform =>
> zynq-zybo}/ps7_init_gpl.c (100%)
> rename board/xilinx/zynq/{zybo_hw_platform =>
> zynq-zybo}/ps7_init_gpl.h (100%)
> create mode 100644 board/xilinx/zynqmp/xil_io.h
> create mode 100644 doc/uImage.FIT/multi-with-fpga.its
> create mode 100644 tools/zynqmpimage.c
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160524/2907b277/attachment.sig>
More information about the U-Boot
mailing list