[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support
Marek Vasut
marex at denx.de
Tue May 31 14:04:00 CEST 2016
On 05/31/2016 01:32 PM, Rajat Srivastava wrote:
> From: Rajesh Bhagat <rajesh.bhagat at nxp.com>
>
> Implements the dwc3 gadget driver support for LS1043
> platform, and performs below operations:
> 1. Enables snooping support for DWC3 controller.
> 2. Enables cache coherency in LS1043 platform.
>
> Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> ---
> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 87 +++++++++++++++++++++-
> .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++
> .../include/asm/arch-fsl-layerscape/sys_proto.h | 11 +++
> drivers/usb/dwc3/core.c | 12 +++
> 4 files changed, 114 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
>
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
Don't mix platform code with driver code, split this patch.
> index 0fb5c7f..84b973d 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> @@ -17,6 +17,10 @@
> #ifdef CONFIG_CHAIN_OF_TRUST
> #include <fsl_validate.h>
> #endif
> +#include <usb.h>
> +#include <dwc3-uboot.h>
> +#include <linux/usb/xhci-fsl.h>
> +
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -318,9 +322,12 @@ void fsl_lsch2_early_init_f(void)
> #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
> out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
> #endif
> - /* Make SEC reads and writes snoopable */
> + /* Make SEC and USB reads and writes snoopable */
> setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
> - SCFG_SNPCNFGCR_SECWRSNP);
> + SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
> + SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
> + SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
> + SCFG_SNPCNFGCR_USB3WRSNP);
>
> /*
> * Enable snoop requests and DVM message requests for
> @@ -336,6 +343,82 @@ void fsl_lsch2_early_init_f(void)
> }
> #endif
>
> +#ifdef CONFIG_USB_DWC3
> +
> +#if defined(CONFIG_LS1043A)
> +static struct dwc3_device dwc3_device_data0 = {
> + .maximum_speed = USB_SPEED_HIGH,
> + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
> + .dr_mode = USB_DR_MODE_PERIPHERAL,
> + .index = 0,
> +};
> +
> +static struct dwc3_device dwc3_device_data1 = {
> + .maximum_speed = USB_SPEED_HIGH,
> + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
> + .dr_mode = USB_DR_MODE_PERIPHERAL,
> + .index = 1,
> +};
> +
> +static struct dwc3_device dwc3_device_data2 = {
> + .maximum_speed = USB_SPEED_HIGH,
> + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
> + .dr_mode = USB_DR_MODE_PERIPHERAL,
> + .index = 2,
> +};
> +
> +int usb_gadget_handle_interrupts(int index)
> +{
> + dwc3_uboot_handle_interrupt(index);
> + return 0;
> +}
> +#endif
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + switch (init) {
> + case USB_INIT_DEVICE:
> + switch (index) {
> +#if defined(CONFIG_LS1043A)
> + case 0:
> + dwc3_uboot_init(&dwc3_device_data0);
> + break;
> +
> + case 1:
> + dwc3_uboot_init(&dwc3_device_data1);
> + break;
> + case 2:
> + dwc3_uboot_init(&dwc3_device_data2);
> + break;
> +#endif
> + default:
> + printf("Invalid Controller Index\n");
> + return -1;
> + }
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +int board_usb_cleanup(int index, enum usb_init_type init)
> +{
> + switch (init) {
> + case USB_INIT_DEVICE:
> +#if defined(CONFIG_LS1043A)
> + dwc3_uboot_exit(index);
> +#endif
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +#endif
> +
> +
> +
> #ifdef CONFIG_BOARD_LATE_INIT
> int board_late_init(void)
> {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> index 57b99d4..13ba1a6 100644
> --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> @@ -328,6 +328,12 @@ struct ccsr_gur {
>
> #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
> #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
> +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000
> +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000
> +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000
> +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000
> +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000
> +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000
>
> /* Supplemental Configuration Unit */
> struct ccsr_scfg {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> new file mode 100644
> index 0000000..252c676
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> @@ -0,0 +1,11 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +#define _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +
> +
> +#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_ */
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 85cc96a..5eeb71d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
> return -ENOMEM;
> }
>
> +#if defined(CONFIG_LS1043A)
How was this added in Linux ? I doubt such horrid ifdef was allowed.
I presume it went through either DT or struct dwc3_device, right ?
So fix this here the same way.
> + /* Change burst beat and outstanding pipelined transfers requests */
> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> + (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf);
> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1,
> + dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
> +
> + /* Enable snooping */
> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> + dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) | 0x22220000);
> +#endif
> +
> if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
> dwc->dr_mode = USB_DR_MODE_HOST;
> else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list