[U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig

Andre Przywara andre.przywara at arm.com
Thu Nov 3 10:10:51 CET 2016


Hi,

On 03/11/16 08:54, Alexander Graf wrote:
> On 11/03/2016 02:36 AM, Andre Przywara wrote:
>> To avoid enumerating the very same DRAM values in defconfig files
>> for each and every Allwinner A64 board out there, let's put some sane
>> default values in the Kconfig file.
>> Boards with different needs can override them at any time.
>>
>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>> ---
>>   board/sunxi/Kconfig           | 3 +++
>>   configs/pine64_plus_defconfig | 2 --
>>   2 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
>> index e1d4ab1..d281a65 100644
>> --- a/board/sunxi/Kconfig
>> +++ b/board/sunxi/Kconfig
>> @@ -145,6 +145,7 @@ config DRAM_CLK
>>       default 792 if MACH_SUN9I
>>       default 312 if MACH_SUN6I || MACH_SUN8I
>>       default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
>> +    default 672 if MACH_SUN50I
>>       ---help---
>>       Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
>>       must be a multiple of 24. For the sun9i (A80), the tested values
>> @@ -164,6 +165,7 @@ config DRAM_ZQ
>>       default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
>>       default 127 if MACH_SUN7I
>>       default 4145117 if MACH_SUN9I
>> +    default 3881915 if MACH_SUN50I
>>       ---help---
>>       Set the dram zq value.
>>   @@ -171,6 +173,7 @@ config DRAM_ODT_EN
>>       bool "sunxi dram odt enable"
>>       default n if !MACH_SUN8I_A23
>>       default y if MACH_SUN8I_A23
>> +    default y if MACH_SUN50I
> 
> This change isn't obvious. It's not mentioned in the patch description
> or removed from the defconfig.

Oh, right, looks like a rebase artifact, since I juggled the patches
around quite a bit. It belongs to patch 10/10, I guess.

Cheers,
Andre.

>>       ---help---
>>       Select this to enable dram odt (on die termination).
>>   diff --git a/configs/pine64_plus_defconfig
>> b/configs/pine64_plus_defconfig
>> index 6d0198f..a53e968 100644
>> --- a/configs/pine64_plus_defconfig
>> +++ b/configs/pine64_plus_defconfig
>> @@ -2,8 +2,6 @@ CONFIG_ARM=y
>>   CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
>>   CONFIG_ARCH_SUNXI=y
>>   CONFIG_MACH_SUN50I=y
>> -CONFIG_DRAM_CLK=672
>> -CONFIG_DRAM_ZQ=3881915
>>   CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
>>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>>   CONFIG_CONSOLE_MUX=y
> 


More information about the U-Boot mailing list