November 2016 Archives by date
Starting: Tue Nov 1 00:40:25 CET 2016
Ending: Wed Nov 30 23:30:56 CET 2016
Messages: 3269
- [U-Boot] OMAP3630 Falcon Mode Questions
Adam Ford
- [U-Boot] Device tree & PCI/ECAM questions
Aaron Williams
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
Wenbin song
- [U-Boot] [PATCH v6 2/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node
Wenbin song
- [U-Boot] [PATCH v1] ARM: at91: add default config file for sama5d36ek CMP board
Wenyou Yang
- [U-Boot] [PATCH 1/2] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH 2/2] fsl/ddr: Enable erratum-a009942 workaround for B/T-series
Shengzhou Liu
- [U-Boot] [PATCH v2 0/6] Add ARMv8 PSCI framework
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 2/6] ARMv8: Enable SMC instruction
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 3/6] ARMv8: Add secure sections for PSCI text and data
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 4/6] ARMv8: Add basic PSCI framework
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 5/6] ARMv8: Setup PSCI memory and dt
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
macro.wave.z at gmail.com
- [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards
Bin Meng
- [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942
Shengzhou Liu
- [U-Boot] [PATCH v2 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v3 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v3 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v3 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
Sam Protsenko
- [U-Boot] [PATCH v3 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v2 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v2 1/2] spl: mmc: fix switch statement
Max Krummenacher
- [U-Boot] [PATCH v2 2/2] imx: make ipu's di configurable
Max Krummenacher
- [U-Boot] [PATCH v2 2/2] imx: make ipu's di configurable
Eric Nelson
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Dinh Nguyen
- [U-Boot] [PATCH V3 2/2] net: add driver for Synopsys Ethernet QoS device
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Tom Rini
- [U-Boot] [PATCH] wandboard: Make Ethernet functional again
Fabio Estevam
- [U-Boot] Device tree & PCI/ECAM questions
Jagan Teki
- [U-Boot] [PATCH v5 00/21] sf: Updates on flash detection
Jagan Teki
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Marek Vasut
- [U-Boot] [RFC PATCH 0/9] ARM: imx: mx6: Add virtual mx6memcal board
Eric Nelson
- [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR
Eric Nelson
- [U-Boot] [RFC PATCH 2/9] mx6memcal: zero values for MPWRDLCTL cause read DQS calibration errors
Eric Nelson
- [U-Boot] [RFC PATCH 3/9] mx6memcal: add configuration for SABRE Lite
Eric Nelson
- [U-Boot] [RFC PATCH 4/9] mx6memcal: add configuration for Nitrogen6_max board
Eric Nelson
- [U-Boot] [RFC PATCH 5/9] mx6memcal: add configuration for tr1x board (i.MX6SL with DDR3)
Eric Nelson
- [U-Boot] [RFC PATCH 6/9] mx6memcal: add configuration for Wandboard Solo (512MiB of x32 DDR3)
Eric Nelson
- [U-Boot] [RFC PATCH 7/9] mx6memcal: add configuration for Wandboard Quad
Eric Nelson
- [U-Boot] [RFC PATCH 8/9] mx6memcal: add configuration for mx6slevk
Eric Nelson
- [U-Boot] [RFC PATCH 9/9] mx6memcal: add configuration for warp board (i.MX6SL)
Eric Nelson
- [U-Boot] [PATCH V3 2/2] net: add driver for Synopsys Ethernet QoS device
Joe Hershberger
- [U-Boot] [PATCH] net: mvgbe: Fix build error with CONFIG_PHYLIB
Joe Hershberger
- [U-Boot] [PATCH v2] net: phy: micrel: center FLP burst timing at 16ms
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: zynq_gem: Modify the nwcfg bit definitions
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: zynq_gem: Correct SGMII enable bit setting
Joe Hershberger
- [U-Boot] [PATCH V3 1/2] dt: net: add DWC EQoS binding
Joe Hershberger
- [U-Boot] [PATCH] wandboard: Make Ethernet functional again
Joe Hershberger
- [U-Boot] [PATCH] net: add synopsys QoS ethernet driver
Joe Hershberger
- [U-Boot] [PATCH v5 00/21] sf: Updates on flash detection
York
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Dinh Nguyen
- [U-Boot] [PATCH v1 1/3] net: Kconfig: Add CONFIG_MACB option
Joe Hershberger
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Marek Vasut
- [U-Boot] [PATCH v1 3/3] net: macb: Remove redundant #ifdef CONFIG_DM_ETH
Joe Hershberger
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Dinh Nguyen
- [U-Boot] U-Boot Support for SIL3531
Rudolf J Streif
- [U-Boot] [PATCH v1 2/3] net: macb: Add the clock support
Joe Hershberger
- [U-Boot] U-Boot Support for SIL3531
Rudolf J Streif
- [U-Boot] [PATCH] odroid-c2: Enable distro boot
Andreas Färber
- [U-Boot] [PATCH] odroid-c2: Enable distro boot
Alexander Graf
- [U-Boot] [PATCH] odroid-c2: Enable distro boot
Andreas Färber
- [U-Boot] [PATCH 0/7] ARM: stm32: add network and qspi driver support to stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH 1/7] ARM: DTS: stm32: add stm32f746-disco device tree files
Michael Kurz
- [U-Boot] [PATCH 2/7] net: stm32: add designware mac glue code for stm32
Michael Kurz
- [U-Boot] [PATCH 3/7] net: phy: add SMSC LAN8742 phy
Michael Kurz
- [U-Boot] [PATCH 4/7] ARM: stm32: enable support for smsc phy on stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH 5/7] ARM: SPI: stm32: add stm32f746 qspi driver
Michael Kurz
- [U-Boot] [PATCH 6/7] ARM: stm32: fix comment in stm32f7 header file
Michael Kurz
- [U-Boot] [PATCH 7/7] SPI: add missing flag to micron/stm N25Q128 flash chips
Michael Kurz
- [U-Boot] [PATCH 2/7] net: stm32: add designware mac glue code for stm32
Joe Hershberger
- [U-Boot] [PATCH 3/7] net: phy: add SMSC LAN8742 phy
Joe Hershberger
- [U-Boot] [PATCH v4 00/11] binman: A tool for creating firmware images
Marcel Ziswiler
- [U-Boot] fixup typo in omap SPI driver
郑 祎
- [U-Boot] Rockchip USB driver
Simon Glass
- [U-Boot] [linux-sunxi] Re: [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)
Chen-Yu Tsai
- [U-Boot] [PATCH 0/8] dm: Update on serial driver progress
Simon Glass
- [U-Boot] [PATCH] cmd: crosec: Move crosec_decode_region helper to cmd/cros_ec.c
Simon Glass
- [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL
Eric Nelson
- [U-Boot] [RFC PATCH 1/3] ARM: mx6: preserve Boot ROM stack in SPL
Eric Nelson
- [U-Boot] [RFC PATCH 2/3] ARM: mx6: ddr: add plugin-utils placeholder
Eric Nelson
- [U-Boot] [RFC PATCH 3/3] ARM: imx: mx6memcal: allow build of combined SPL+U-Boot
Eric Nelson
- [U-Boot] [PATCH v2 0/3] net: macb: Add option and clock support
Wenyou Yang
- [U-Boot] [PATCH v2 1/3] net: Kconfig: Add CONFIG_MACB option
Wenyou Yang
- [U-Boot] [PATCH v2 2/3] net: macb: Add the clock support
Wenyou Yang
- [U-Boot] [PATCH v2 3/3] net: macb: Remove redundant #ifdef CONFIG_DM_ETH
Wenyou Yang
- [U-Boot] Device tree & PCI/ECAM questions
Aaron Williams
- [U-Boot] [PATCH] ARM64: zynqmp: Correct the sdhci minimum frequency for ep108
Michal Simek
- [U-Boot] [PATCH v3] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree
Sriram Dash
- [U-Boot] With u-boot vertion u-boot-d8bdfc8 compile error
李东升
- [U-Boot] [PATCH v3 0/3] Raspberry Pi EFI enablement
Alexander Graf
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [PATCH v3 2/3] bcm2835 video: Map frame buffer as 32bpp
Alexander Graf
- [U-Boot] [PATCH v3 3/3] bcm2835: Reserve the spin table in efi memory map
Alexander Graf
- [U-Boot] [PATCH v3] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree
Marek Vasut
- [U-Boot] [PATCH] tools: Execute tools from objtree
Marek Vasut
- [U-Boot] [PATCH] tools: Execute tools from objtree
Marek Vasut
- [U-Boot] fixup typo in omap SPI driver
Jagan Teki
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
Michal Simek
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
James Chargin
- [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards
Simon Glass
- [U-Boot] cosmetic: Fix indentation in README
Tom Rini
- [U-Boot] [U-Boot, 1/3] ti: common: board_detect: Replace hardcoded value with macro
Tom Rini
- [U-Boot] [U-Boot, 2/3] ti: common: board_detect: Setup initial default value for config as well
Tom Rini
- [U-Boot] [U-Boot, 3/3] ti: common: board_detect: Return a valid empty string for un-initialized eeprom
Tom Rini
- [U-Boot] [U-Boot, V2] OMAP3: omap3_logic: Remove LCD preboot info
Tom Rini
- [U-Boot] OMAP3: omap3_logic: Add scripts to boot over network.
Tom Rini
- [U-Boot] omap3logic: Fix Auto detect Logic PD Models
Tom Rini
- [U-Boot] [U-Boot,1/4] Fix spelling of "multiple".
Tom Rini
- [U-Boot] [U-Boot,2/4] Fix spelling of "occur".
Tom Rini
- [U-Boot] [U-Boot,3/4] Fix spelling of "extended".
Tom Rini
- [U-Boot] [U-Boot,4/4] Fix spelling of "resetting".
Tom Rini
- [U-Boot] cmd: load: align cache flush
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] mkimage: Fix missing free() in show_valid_options()
Tom Rini
- [U-Boot] travis.yml: Add in uniphier as a job, modify aarch64 builds a bit
Tom Rini
- [U-Boot] README: fix typo candiate -> candidate
Tom Rini
- [U-Boot] [PATCH v2 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Tom Rini
- [U-Boot] [PATCH v2 2/6] ARMv8: Enable SMC instruction
Tom Rini
- [U-Boot] [PATCH v2 3/6] ARMv8: Add secure sections for PSCI text and data
Tom Rini
- [U-Boot] [PATCH v2 5/6] ARMv8: Setup PSCI memory and dt
Tom Rini
- [U-Boot] [PATCH v2 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
Tom Rini
- [U-Boot] [PATCH 0/7] SF: Cadence QSPI driver fixes and clean up
Phil Edworthy
- [U-Boot] [PATCH 1/7] spi: cadence_qspi: Fix clearing of pol/pha bits
Phil Edworthy
- [U-Boot] [PATCH 2/7] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH 3/7] spi: cadence_qspi: Use #define for bits instead of bit shifts
Phil Edworthy
- [U-Boot] [PATCH 4/7] spi: cadence_qspi: Clean up the #define names
Phil Edworthy
- [U-Boot] [PATCH 5/7] spi: cadence_qspi: Remove returns from end of void functions
Phil Edworthy
- [U-Boot] [PATCH 6/7] spi: cadence_qspi: Fix CQSPI_CAL_DELAY calculation
Phil Edworthy
- [U-Boot] [PATCH 7/7] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH v1] dfu: align array in dfu_get_dev_type with enum dfu_device_type
Lukasz Majewski
- [U-Boot] [PATCH 0/8] dm: Update on serial driver progress
Marcel Ziswiler
- [U-Boot] [PATCH 0/2] drivers: timer: inroduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH 1/2] drivers: timer: Introduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Vlad Zakharov
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Dinh Nguyen
- [U-Boot] [PATCH] arm: dts: Fix Rockchip sort order
Andreas Färber
- [U-Boot] [PATCH] arm: rockchip: Fix typo in ROCKCHIP_RK3288 help
Andreas Färber
- [U-Boot] [PATCH 2/7] net: stm32: add designware mac glue code for stm32
Michael Kurz
- [U-Boot] [PATCH 0/2] rpi: enable passthrough of FDT blob provided by the firmware
Cédric Schieli
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Cédric Schieli
- [U-Boot] [PATCH 2/2] rpi: expose the firmware provided FDT blob in ${fw_fdt_addr}
Cédric Schieli
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] [PATCH 2/7] spi: cadence_qspi: Fix baud rate calculation
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH 1/2] drivers: timer: Introduce ARC timer driver
Simon Glass
- [U-Boot] [PATCH 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Simon Glass
- [U-Boot] [PATCH] arm: dts: Fix Rockchip sort order
Simon Glass
- [U-Boot] [PATCH] arm: rockchip: Fix typo in ROCKCHIP_RK3288 help
Simon Glass
- [U-Boot] [PATCH 1/4] ARM: tegra: add SoC-level hook for board_late_init()
Joe Hershberger
- [U-Boot] [PATCH 2/4] ARM: tegra: configure Ethernet address on Tegra186
Joe Hershberger
- [U-Boot] [PATCH 3/4] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT
Joe Hershberger
- [U-Boot] [PATCH 4/4] ARM: tegra: enable Ethernet on p2771-0000
Joe Hershberger
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
Joe Hershberger
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Marek Vasut
- [U-Boot] [PATCH] armv8: define get_ticks() for the ARMv8 Generic Timer
Andre Przywara
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Andre Przywara
- [U-Boot] [PATCH] doc: update README.arm64
Andre Przywara
- [U-Boot] [PATCH v2] rk3399: Reserve space for ARM Trust Firmware
Andreas Färber
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Andre Przywara
- [U-Boot] [RFC PATCH 01/10] sun6i: Restrict some register initialization to Allwinner A31 SoC
Andre Przywara
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [RFC PATCH 04/10] sunxi: H3: add and rename some DRAM contoller registers
Andre Przywara
- [U-Boot] [RFC PATCH 05/10] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [RFC PATCH 06/10] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [RFC PATCH 07/10] sunxi: H3/A64: fix non-ODT setting
Andre Przywara
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [RFC PATCH 09/10] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [RFC PATCH 10/10] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH V1] Add support of ls1021a-iot
Feng Li
- [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards
Bin Meng
- [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards
Bin Meng
- [U-Boot] [PATCH v4 07/11] binman: Add a build rule for binman
Bin Meng
- [U-Boot] [PATCH v4 08/11] binman: Allow configuration options to be used in .dts files
Bin Meng
- [U-Boot] dtc 1.4.2 warnings
Bin Meng
- [U-Boot] [PATCH V2] Add support of ls1021a-iot
feng.li_2 at nxp.com
- [U-Boot] [PATCH 2/7] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Alexander Graf
- [U-Boot] [RFC PATCH 01/10] sun6i: Restrict some register initialization to Allwinner A31 SoC
Alexander Graf
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Alexander Graf
- [U-Boot] [PATCH v2] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Alexander Graf
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Alexander Graf
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Hans de Goede
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Hans de Goede
- [U-Boot] [RFC PATCH 03/10] sunxi: provide default DRAM config for sun50i in Kconfig
Hans de Goede
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Andre Przywara
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Hans de Goede
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Andre Przywara
- [U-Boot] [PATCH v2 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Hongbo Zhang
- [U-Boot] [PATCH] ARM: keystone2: PLL: Enable glitch free initialization sequence
Lokesh Vutla
- [U-Boot] [PATCH] ARM: k2g: Update PLL Multiplier and divider values
Lokesh Vutla
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [PATCH v2 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [PATCH v2 5/6] ARMv8: Setup PSCI memory and dt
Hongbo Zhang
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Alexander Graf
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] [PATCH v2] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] With u-boot vertion u-boot-d8bdfc8 compile error
Michal Simek
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Hans de Goede
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH 0/6][v3] Update LS2080A SoC code to support LS2088A SoC
Priyanka Jain
- [U-Boot] [PATCH 1/6][v3] armv8: lsch3: Add generic get_svr() in assembly
Priyanka Jain
- [U-Boot] [PATCH 2/6][v3] armv8: lsch3: Use SVR based timer base address detection
Priyanka Jain
- [U-Boot] [PATCH 3/6][v3] armv8: fsl-layerscape: Update TZASC registers type
Priyanka Jain
- [U-Boot] [PATCH 4/6][v3] armv8: fsl-layerscape : Check SVR for initializing TZASC
Priyanka Jain
- [U-Boot] [PATCH 5/6][v3] armv8: fsl-layerscape: Add NXP LS2088A SoC support
Priyanka Jain
- [U-Boot] [PATCH 6/6][v3] armv8/fsl-lsch3: Update code to release secondary cores
Priyanka Jain
- [U-Boot] [PATCH v3] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] dtc 1.4.2 warnings
Tom Rini
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Alexander Graf
- [U-Boot] [PATCH v2 2/7] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH][v2] armv8: ls2080a: Update serdes protocol support
Priyanka Jain
- [U-Boot] [PATCH][v2] driver: net: ldpaa_eth: Fix missing bracket issue
Priyanka Jain
- [U-Boot] [PATCH v4 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v4 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v4 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
Sam Protsenko
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Simon Glass
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Dinh Nguyen
- [U-Boot] [PATCH v2] cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c
Moritz Fischer
- [U-Boot] dtc 1.4.2 warnings
James Chargin
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Simon Glass
- [U-Boot] [PATCH v2 0/2] drivers: timer: inroduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v2 1/2] drivers: timer: Introduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v2 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Vlad Zakharov
- [U-Boot] [PATCH v4 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Tom Rini
- [U-Boot] EHCI timed out on TD - token
Michael Kasprowicz
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [PATCH v2] cmd: crosec: Move cros_ec_decode_region helper to cmd/cros_ec.c
Simon Glass
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH 1/4] arm: dts: Add devicetree for i.MX6UL
Jagan Teki
- [U-Boot] [PATCH 2/4] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH 3/4] dm: net: fec: Add .read_rom_hwaddr
Jagan Teki
- [U-Boot] [PATCH 4/4] net: fec: Zap local mac variable
Jagan Teki
- [U-Boot] [PATCH v5 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v5 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v5 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
Sam Protsenko
- [U-Boot] [PATCH v4 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [U-Boot 1/2] keystone2: Move target selection to Kconfig
Andrew F. Davis
- [U-Boot] [U-Boot 2/2] ti_armv7_keystone2: env: Add NFS loading support for PMMC and MON
Andrew F. Davis
- [U-Boot] [PATCH 3/4] dm: net: fec: Add .read_rom_hwaddr
Joe Hershberger
- [U-Boot] [PATCH 4/4] net: fec: Zap local mac variable
Joe Hershberger
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [PATCH v2] rk3399: Reserve space for ARM Trust Firmware
Kever Yang
- [U-Boot] Rockchip USB driver
Kever Yang
- [U-Boot] [PATCH 18/20] rockchip: clk: Support setting ACLK
Kever Yang
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH] tools: imximage: check return value when open the plugin file
Peng Fan
- [U-Boot] [U-Boot 1/2] keystone2: Move target selection to Kconfig
Lokesh Vutla
- [U-Boot] [U-Boot 2/2] ti_armv7_keystone2: env: Add NFS loading support for PMMC and MON
Lokesh Vutla
- [U-Boot] [PATCH 1/2] SECURE_BOOT: Enable chain of trust on LS1012A platform
Vinitha Pillai
- [U-Boot] [PATCH 2/2] LS1012ARDB: Add QSPI Secure Boot target
Vinitha Pillai
- [U-Boot] With u-boot vertion u-boot-d8bdfc8 compile error
李东升
- [U-Boot] [PATCH 7/7] spi: cadence_qspi: Support specifying the sample edge used
Vignesh R
- [U-Boot] [PATCH v1] sama5d2_xplained: move CONFIG_SYS_NO_FLASH to default config files
Wenyou Yang
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Phil Edworthy
- [U-Boot] [PATCH v2 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Hongbo Zhang
- [U-Boot] [PATCH] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] With u-boot vertion u-boot-d8bdfc8 compile error
李东升
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH 7/7] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH 2/3] fsl/ddr: Enable erratum-a009942 workaround for B/T-series
Shengzhou Liu
- [U-Boot] [PATCH 3/3] fsl/ddr: Fix compiling warning
Shengzhou Liu
- [U-Boot] With u-boot vertion u-boot-d8bdfc8 compile error
李东升
- [U-Boot] [RFC PATCH] lib/timer: initialize timebase_l/timebase_h
Andre Przywara
- [U-Boot] [PATCH v4] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH RESEND v2 2/2] spi: ti_qspi: Fix baudrate divider calculation
Jagan Teki
- [U-Boot] [PATCH] sf: Fix S25FS512S id param table
Jagan Teki
- [U-Boot] [PATCH] tools: imximage: check return value when open the plugin file
Tom Rini
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH] ARM: keystone2: PLL: Enable glitch free initialization sequence
Tom Rini
- [U-Boot] [PATCH] ARM: k2g: Update PLL Multiplier and divider values
Tom Rini
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Ladislav Michl
- [U-Boot] [PATCHv2 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Ladislav Michl
- [U-Boot] [PATCHv2 2/3] igep00x0: consolidate defconfigs
Ladislav Michl
- [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings
Ladislav Michl
- [U-Boot] cubieboard sunxi u-boot help me
崔超
- [U-Boot] [RFC PATCH 01/10] sun6i: Restrict some register initialization to Allwinner A31 SoC
Chen-Yu Tsai
- [U-Boot] [PATCH] mkimage: Allow including a ramdisk in FIT auto mode
Tomeu Vizoso
- [U-Boot] [PATCH v2 ] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH] SPI: fixup typo in omap2_spi.c
郑 祎
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH 0/4] sunxi: Improve the SinA33 support
Maxime Ripard
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Maxime Ripard
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Maxime Ripard
- [U-Boot] [PATCH 3/4] sunxi: sina33: Enable the eMMC
Maxime Ripard
- [U-Boot] [PATCH 4/4] sunxi: sina33: Enable the LCD
Maxime Ripard
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] cubieboard sunxi u-boot help me
Jagan Teki
- [U-Boot] [PATCHv2 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Ladislav Michl
- [U-Boot] U-Boot Support for SIL3531
Tom Rini
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Tom Rini
- [U-Boot] [PATCH 2/2] rpi: expose the firmware provided FDT blob in ${fw_fdt_addr}
Tom Rini
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Cédric Schieli
- [U-Boot] [PATCH v2 0/7] ARM: stm32: add network and qspi driver support to stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH v2 1/7] ARM: DTS: stm32: add stm32f746-disco device tree files
Michael Kurz
- [U-Boot] [PATCH v2 2/7] ARM: stm32: cleanup stm32f7 files
Michael Kurz
- [U-Boot] [PATCH v2 3/7] net: stm32: add designware mac glue code for stm32
Michael Kurz
- [U-Boot] [PATCH v2 4/7] net: phy: add SMSC LAN8742 phy
Michael Kurz
- [U-Boot] [PATCH v2 5/7] ARM: stm32: enable support for smsc phy on stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH v2 6/7] ARM: SPI: stm32: add stm32f746 qspi driver
Michael Kurz
- [U-Boot] [PATCH v2 7/7] SPI: add missing flag to micron/stm N25Q128 flash chips
Michael Kurz
- [U-Boot] [PATCHv2 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Javier Martinez Canillas
- [U-Boot] [PATCHv2 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Javier Martinez Canillas
- [U-Boot] [PATCHv2 2/3] igep00x0: consolidate defconfigs
Javier Martinez Canillas
- [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings
Javier Martinez Canillas
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Fabio Estevam
- [U-Boot] [RFC] 0/4] Add Pl330 DMA support
Marek Vasut
- [U-Boot] [PATCH v3] gpio: dwapb: Add support for port B
Marek Vasut
- [U-Boot] [PATCH v2 2/7] spi: cadence_qspi: Fix baud rate calculation
Marek Vasut
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Tom Rini
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Chen-Yu Tsai
- [U-Boot] [PATCH 3/4] sunxi: sina33: Enable the eMMC
Chen-Yu Tsai
- [U-Boot] [PATCH] buildman: Fix building based on 'options' field
Tom Rini
- [U-Boot] cubieboard sunxi u-boot help me
崔超
- [U-Boot] Issues coupling am335x with VSC8601 PHY
Alex
- [U-Boot] [bug report] sunxi: booting from eMMC
Hans de Goede
- [U-Boot] [PATCH v3 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node
Vignesh R
- [U-Boot] [PATCH v3 2/2] spi: ti_qspi: Fix baudrate divider calculation
Vignesh R
- [U-Boot] [PATCH RESEND v2 2/2] spi: ti_qspi: Fix baudrate divider calculation
R, Vignesh
- [U-Boot] [bug report] sunxi: booting from eMMC
Alexandr Bochkarev
- [U-Boot] [PATCH] engicam: icorem6: Fix config files
Jagan Teki
- [U-Boot] [PATCH] engicam: icorem6: Fix config files
Tom Rini
- [U-Boot] engicam: icorem6: Fix config files
Tom Rini
- [U-Boot] [PATCH v9 00/21] dm: Generic MTD Subsystem/SPI-NOR
Simon Glass
- [U-Boot] [PATCH v9 01/21] dm: mtd: Add dm mtd core ops
Simon Glass
- [U-Boot] [PATCH v5 02/21] sf: Simplify lock ops detection code
Simon Glass
- [U-Boot] [PATCH v5 03/21] sf: sandbox: Use JEDEC_MFR|ID in id exctract
Simon Glass
- [U-Boot] [PATCH v5 04/21] sf: Cleanup spi_flash_info{}
Simon Glass
- [U-Boot] [PATCH v5 05/21] sf: Cleanup sf_params
Simon Glass
- [U-Boot] [PATCH v5 06/21] sf: nr_sectors -> n_sectors
Simon Glass
- [U-Boot] [PATCH v5 07/21] sf: Add SPI_FLASH_MAX_ID_LEN
Simon Glass
- [U-Boot] [PATCH v5 08/21] sf: Increase max id length by 1 byte
Simon Glass
- [U-Boot] [PATCH v5 09/21] sf: Add INFO6 flash_info macro
Simon Glass
- [U-Boot] [PATCH v5 10/21] sf: params: Add S25FS256S_64K spi flash support
Simon Glass
- [U-Boot] [PATCH v5 11/21] sf: Remove legacy idcode detection code
Simon Glass
- [U-Boot] [PATCH v5 12/21] sf: Remove non-meaningful comments
Simon Glass
- [U-Boot] [PATCH v5 13/21] sf: Rename sf_params.c to spi_flash_ids
Simon Glass
- [U-Boot] [PATCH v5 14/21] sf: ids: Use small letter's with flash name
Simon Glass
- [U-Boot] [PATCH v5 15/21] sf: ids: Use small letter in ext_jedec
Simon Glass
- [U-Boot] [PATCH v5 16/21] sf: Rename few local functions
Simon Glass
- [U-Boot] [PATCH v5 17/21] spi: Remove dual flash code
Simon Glass
- [U-Boot] [PATCH v5 18/21] sf: dataflash: Remove unneeded spi data
Simon Glass
- [U-Boot] [PATCH v5 19/21] sf: dataflash: Move flash id detection into jedec_probe
Simon Glass
- [U-Boot] [PATCH v5 20/21] sf: dataflash: Fix add_dataflash return logic
Simon Glass
- [U-Boot] [PATCH v9 03/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR entry
Simon Glass
- [U-Boot] [PATCH v9 04/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR_USE_4K_SECTORS
Simon Glass
- [U-Boot] [PATCH v9 05/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MISC entry
Simon Glass
- [U-Boot] [PATCH v9 06/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MACRONIX entry
Simon Glass
- [U-Boot] [PATCH v9 07/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SPANSION entry
Simon Glass
- [U-Boot] [PATCH v9 08/21] mtd: spi-nor: Kconfig: Add SPI_NOR_STMICRO entry
Simon Glass
- [U-Boot] [PATCH v9 09/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SST entry
Simon Glass
- [U-Boot] [PATCH v9 10/21] mtd: spi-nor: Kconfig: Add SPI_NOR_WINBOND entry
Simon Glass
- [U-Boot] [PATCH v9 11/21] spi: Add spi_write_then_read
Simon Glass
- [U-Boot] [PATCH v9 13/21] mtd: spi-nor: Kconfig: Add MTD_M25P80 entry
Simon Glass
- [U-Boot] [PATCH] buildman: Fix building based on 'options' field
Simon Glass
- [U-Boot] [PATCH v9 12/21] mtd: spi-nor: Add m25p80 driver
Simon Glass
- [U-Boot] [PATCH v9 02/21] mtd: Add SPI-NOR core support
Simon Glass
- [U-Boot] [PATCH v9 17/21] dm: mtd: Add uclass_driver.flags
Simon Glass
- [U-Boot] [PATCH v9 18/21] dm: mtd: Add post_bind
Simon Glass
- [U-Boot] [PATCH v9 19/21] cmd: Add mtd command support
Simon Glass
- [U-Boot] [PATCH v5 21/21] sf: dataflash: Minor cleanups
Simon Glass
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
Simon Glass
- [U-Boot] [RFC PATCH 09/10] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Simon Glass
- [U-Boot] [RFC PATCH 02/10] Makefile: use "arm64" architecture for U-Boot image files
Simon Glass
- [U-Boot] [PATCH v3] gpio: dwapb: Add support for port B
Simon Glass
- [U-Boot] [PATCH] mkimage: Allow including a ramdisk in FIT auto mode
Simon Glass
- [U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again
Fabio Estevam
- [U-Boot] [PATCH 0/3] Create python filesystem tests
Stefan Brüns
- [U-Boot] [PATCH 1/3] test/py: expose config and log as session scoped fixture
Stefan Brüns
- [U-Boot] [PATCH 2/3] test/py: Allow to pass u_boot_log instead of console for run_and_log
Stefan Brüns
- [U-Boot] [PATCH 3/3] test/py: Create tests for ext4 and fat testing on sandbox
Stefan Brüns
- [U-Boot] [PATCH] tools: Makefile: improve cross_tools target usability
Masahiro Yamada
- [U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again
Stefano Babic
- [U-Boot] [PATCH v5 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Tom Rini
- [U-Boot] [PATCH] sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
Emmanuel Vadot
- [U-Boot] [PATCH] ext4: Fix handling of sparse files
Stefan Brüns
- [U-Boot] [PATCH] api: Use hashtable function for API_env_enum
Emmanuel Vadot
- [U-Boot] [PATCH 0/5] arm: imx6: Enable Secure Boot (HAB) with SPL Builds
Sven Ebenfeld
- [U-Boot] [PATCH 1/5] arm: imx: remove bmode , hdmidet and dek commands from SPL
Sven Ebenfeld
- [U-Boot] [PATCH 2/5] arm: imx: add HAB authentication of image to SPL boot
Sven Ebenfeld
- [U-Boot] [PATCH 3/5] tools: mkimage: add firmware-ivt image type for HAB verification
Sven Ebenfeld
- [U-Boot] [PATCH 4/5] doc: imx6: add section for secure boot with SPL
Sven Ebenfeld
- [U-Boot] [PATCH 5/5] Makefile: preserve output for images that can contain HAB Blocks
Sven Ebenfeld
- [U-Boot] [PATCH] travis-ci: Try harder to build all ARM targets
Tom Rini
- [U-Boot] [PATCH 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Stefan Brüns
- [U-Boot] [PATCH 2/2] fs-test.sh: Update expected results
Stefan Brüns
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Jonathan Liu
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Stephen Warren
- [U-Boot] [PATCH 2/2] rpi: expose the firmware provided FDT blob in ${fw_fdt_addr}
Stephen Warren
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Stephen Warren
- [U-Boot] [PATCH v3 2/3] bcm2835 video: Map frame buffer as 32bpp
Stephen Warren
- [U-Boot] [PATCH v3 3/3] bcm2835: Reserve the spin table in efi memory map
Stephen Warren
- [U-Boot] [PATCH 1/3] test/py: expose config and log as session scoped fixture
Stephen Warren
- [U-Boot] [PATCH 2/3] test/py: Allow to pass u_boot_log instead of console for run_and_log
Stephen Warren
- [U-Boot] [PATCH 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Stephen Warren
- [U-Boot] [PATCH 2/2] fs-test.sh: Update expected results
Stephen Warren
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Cédric Schieli
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Cédric Schieli
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [PATCH v3 3/3] bcm2835: Reserve the spin table in efi memory map
Alexander Graf
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again
Stefano Babic
- [U-Boot] [PATCH 1/2] rpi: save firmware provided boot param for later use
Jonathan Liu
- [U-Boot] mx6sabresd: Make Ethernet functional again
Tom Rini
- [U-Boot] [PATCH] wandboard: Make Ethernet functional again
Fabio Estevam
- [U-Boot] [PATCH v2 0/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH v2 0/5] arm: imx6: Enable Secure Boot (HAB) with SPL Builds
Sven Ebenfeld
- [U-Boot] [PATCH v2 1/5] arm: imx: remove bmode , hdmidet and dek commands from SPL
Sven Ebenfeld
- [U-Boot] [PATCH v2 2/5] arm: imx: add HAB authentication of image to SPL boot
Sven Ebenfeld
- [U-Boot] [PATCH v2 3/5] tools: mkimage: add firmware-ivt image type for HAB verification
Sven Ebenfeld
- [U-Boot] [PATCH v2 4/5] doc: imx6: add section for secure boot with SPL
Sven Ebenfeld
- [U-Boot] [PATCH v2 5/5] Makefile: preserve output for images that can contain HAB Blocks
Sven Ebenfeld
- [U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM
Jagan Teki
- [U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support
Jagan Teki
- [U-Boot] [PATCH 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Stefan Bruens
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Maxime Ripard
- [U-Boot] [PATCH v2 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Stefan Brüns
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Fabio Estevam
- [U-Boot] [U-Boot, 3/4] colibri_pxa270: drop lzma support for space reason
Tom Rini
- [U-Boot] [U-Boot, v4, 2/2] image: Protect against overflow in unknown_msg()
Tom Rini
- [U-Boot] armv8: define get_ticks() for the ARMv8 Generic Timer
Tom Rini
- [U-Boot] doc: update README.arm64
Tom Rini
- [U-Boot] tools: imximage: check return value when open the plugin file
Tom Rini
- [U-Boot] wandboard: Make Ethernet functional again
Tom Rini
- [U-Boot] mkimage: Allow including a ramdisk in FIT auto mode
Tom Rini
- [U-Boot] buildman: Fix building based on 'options' field
Tom Rini
- [U-Boot] travis-ci: Try harder to build all ARM targets
Tom Rini
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Chen-Yu Tsai
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] Rockchip USB driver
Simon Glass
- [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode
Keerthy
- [U-Boot] [PATCH v3 0/5] Add ARMv8 PSCI framework
macro.wave.z at gmail.com
- [U-Boot] [PATCH v3 1/5] ARMv8: Enable SMC instruction
macro.wave.z at gmail.com
- [U-Boot] [PATCH v3 2/5] ARMv8: Add secure sections for PSCI text and data
macro.wave.z at gmail.com
- [U-Boot] [PATCH v3 3/5] ARMv8: Add basic PSCI framework
macro.wave.z at gmail.com
- [U-Boot] [PATCH v3 4/5] ARMv8: Setup PSCI memory and device tree
macro.wave.z at gmail.com
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
macro.wave.z at gmail.com
- [U-Boot] [PATCH 1/3 v2] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information
Stefan Roese
- [U-Boot] [PATCH] evb-rk3399: deduced the dram node size when space reserved
Kever Yang
- [U-Boot] [PATCH] config: evb-rk3399: enable PWM_ROCKCHIP
Kever Yang
- [U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
Emmanuel Vadot
- [U-Boot] [PATCH 1/4] kconfig: Add API kconfig file
Emmanuel Vadot
- [U-Boot] [PATCH 2/4] kconfig: arm: Add SYS_DCACHE_OFF option
Emmanuel Vadot
- [U-Boot] [PATCH 3/4] kconfig: Add a FREEBSD option
Emmanuel Vadot
- [U-Boot] [PATCH 4/4] distro_bootcmd: Add command to run FreeBSD
Emmanuel Vadot
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Maxime Ripard
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Chen-Yu Tsai
- [U-Boot] [PATCH] evb-rk3399: deduced the dram node size when space reserved
Andreas Färber
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH] tools: Makefile: improve cross_tools target usability
Stefan Müller-Klieser
- [U-Boot] [PATCH v4 0/7] toradex: config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v4 1/7] Revert "generic-board: allow showing custom board info"
Marcel Ziswiler
- [U-Boot] [PATCH v4 2/7] generic-board: make show_board_info a weak function
Marcel Ziswiler
- [U-Boot] [PATCH v4 3/7] apalis/colibri_t20/t30: deactivate displaying board info
Marcel Ziswiler
- [U-Boot] [PATCH v4 4/7] toradex: config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v4 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v4 6/7] apalis/colibri_t30: move environment location
Marcel Ziswiler
- [U-Boot] [PATCH v4 7/7] colibri_vf: usb gadget: toradex pid is now set generically
Marcel Ziswiler
- [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function
Mark Rutland
- [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function
Mark Rutland
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Cédric Schieli
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Fabio Estevam
- [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI
Simon Glass
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86
Simon Glass
- [U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH v4 00/14] efi: x86: Add EFI hello world and loader support for x86
Simon Glass
- [U-Boot] [PATCH v4 01/14] x86: Correct a build warning in x86 tables
Simon Glass
- [U-Boot] [PATCH v4 02/14] efi: Correct cache flush alignment
Simon Glass
- [U-Boot] [PATCH v4 03/14] efi: Fix debug message address format
Simon Glass
- [U-Boot] [PATCH v4 04/14] x86: Tidy up selection of building the EFI stub
Simon Glass
- [U-Boot] [PATCH v4 05/14] efi: Makefile: Export variables for use with EFI
Simon Glass
- [U-Boot] [PATCH v4 06/14] efi: Add support for a hello world test program
Simon Glass
- [U-Boot] [PATCH v4 07/14] elf: arm: Add a few ARM relocation types
Simon Glass
- [U-Boot] [PATCH v4 08/14] efi: arm: Add EFI app support
Simon Glass
- [U-Boot] [PATCH v4 09/14] efi: arm: Add aarch64 EFI app support
Simon Glass
- [U-Boot] [PATCH v4 10/14] efi: arm: Enable the hello world test program
Simon Glass
- [U-Boot] [PATCH v4 11/14] x86: Move efi .lds files into the 'lib' directory
Simon Glass
- [U-Boot] [PATCH v4 12/14] x86: Move efi .S files into the 'lib' directory
Simon Glass
- [U-Boot] [PATCH v4 13/14] efi: x86: Adjust EFI files support efi_loader
Simon Glass
- [U-Boot] [PATCH v4 14/14] x86: Enable EFI loader support
Simon Glass
- [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function
york sun
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Alexander Graf
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Fabio Estevam
- [U-Boot] [PATCH 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] dt: net: add DWC EQoS binding
Joe Hershberger
- [U-Boot] net: add driver for Synopsys Ethernet QoS device
Joe Hershberger
- [U-Boot] ARM: tegra: add SoC-level hook for board_late_init()
Joe Hershberger
- [U-Boot] ARM: tegra: configure Ethernet address on Tegra186
Joe Hershberger
- [U-Boot] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT
Joe Hershberger
- [U-Boot] ARM: tegra: enable Ethernet on p2771-0000
Joe Hershberger
- [U-Boot] net: phy: micrel: center FLP burst timing at 16ms
Joe Hershberger
- [U-Boot] net: mvgbe: Fix build error with CONFIG_PHYLIB
Joe Hershberger
- [U-Boot] net: use random ethernet address if invalid and not zero
Joe Hershberger
- [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()
york sun
- [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.
york sun
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
Joe Hershberger
- [U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support
york sun
- [U-Boot] [PATCH 4/5] kconfig: fsl PPA: move CONFIG_* to Kconfig
york sun
- [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization
york sun
- [U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings
york sun
- [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
york sun
- [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-009008
york sun
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
york sun
- [U-Boot] [PATCH v2 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
James Chargin
- [U-Boot] [PATCH v2 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH 0/3] arm: Move TI/omap related code to arch/arm/mach-omap2
Tom Rini
- [U-Boot] [PATCH 1/3] arm: Introduce ARCH_OMAP2
Tom Rini
- [U-Boot] [PATCH 2/3] arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms
Tom Rini
- [U-Boot] [PATCH 3/3] TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2
Tom Rini
- [U-Boot] [PATCH 4/5] kconfig: fsl PPA: move CONFIG_* to Kconfig
Z.Q. Hou
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Stephen Warren
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Stephen Warren
- [U-Boot] [PATCH v2 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Stephen Warren
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
Yuan Yao
- [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.
Yao Yuan
- [U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support
Yao Yuan
- [U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support
york sun
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
york sun
- [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
york sun
- [U-Boot] [PATCH v5] efi_loader: console: Correctly report modes
Emmanuel Vadot
- [U-Boot] 2016.09: FIT Image
Vered Zvi
- [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
Ashish Kumar
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
Yao Yuan
- [U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support
Yao Yuan
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
Yao Yuan
- [U-Boot] [PATCH] arm: ls1021a: improve the core frequency to 1.2GHZ
Yuan Yao
- [U-Boot] [PATCH v2 0/4] serial: pxa: kconfig and optional driver model integration
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/4] serial: pxa: use kconfig for serial configuration
Marcel Ziswiler
- [U-Boot] [PATCH v2 2/4] serial: pxa: integrate optional driver model handling
Marcel Ziswiler
- [U-Boot] [PATCH v2 3/4] colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason
Marcel Ziswiler
- [U-Boot] [PATCH v2 4/4] colibri_pxa270: transition to driver model for serial
Marcel Ziswiler
- [U-Boot] [PATCH 0/4] enable the host controller for rk3036
Kever Yang
- [U-Boot] [PATCH 1/4] config: rk3036: enable configs for USB HOST
Kever Yang
- [U-Boot] [PATCH 2/4] config: rk3036: enable fix regulator
Kever Yang
- [U-Boot] [PATCH 3/4] dts: arm: rk3036: add usb vbus node
Kever Yang
- [U-Boot] [PATCH 4/4] rk3036: enable the vbus regulator when borad_init
Kever Yang
- [U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
Maxime Ripard
- [U-Boot] [PATCH RESEND 1/9] fdtdec: Fix alias retrieval
Maxime Ripard
- [U-Boot] [PATCH RESEND 2/9] sunxi: chip: Add 1-wire node
Maxime Ripard
- [U-Boot] [PATCH RESEND 3/9] w1: Add 1-Wire uclass
Maxime Ripard
- [U-Boot] [PATCH RESEND 4/9] w1: Add 1-Wire gpio driver
Maxime Ripard
- [U-Boot] [PATCH RESEND 5/9] EEPROM: Add an EEPROM uclass
Maxime Ripard
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Maxime Ripard
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Maxime Ripard
- [U-Boot] [PATCH RESEND 8/9] sunxi: Add CHIP's DIP support
Maxime Ripard
- [U-Boot] [PATCH RESEND 9/9] config: chip: Enable DIP support
Maxime Ripard
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Cédric Schieli
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH 1/3 v3] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings
Prabhakar Kushwaha
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Jonathan Liu
- [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09
Raschen Josef
- [U-Boot] Pull request, u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 02/11] net: sunxi-emac: Write HW address via function
Olliver Schinagl
- [U-Boot] [PATCH 03/11] net: sunxi-emac: Add write_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 04/11] net: sunxi-emac: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 05/11] net: Add ability to set MAC address via EEPROM to Kconfig
Olliver Schinagl
- [U-Boot] [PATCH 06/11] arm: sunxi: Use read_rom_hwaddr() to obtain MAC address
Olliver Schinagl
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Olliver Schinagl
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 09/11] net: sunxi: Enable eeprom on OLinuXino Lime boards
Olliver Schinagl
- [U-Boot] [PATCH 10/11] tools: Allow crc8 to be used
Olliver Schinagl
- [U-Boot] [PATCH 11/11] tools: Add tool to add crc8 to a mac address
Olliver Schinagl
- [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH 1/7] sunxi: Sync GR8 DTS and AXP209 with the kernel
Maxime Ripard
- [U-Boot] [PATCH 2/7] mtd: nand: add support for the TC58NVG2S0H chip
Maxime Ripard
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] [PATCH 5/7] nand: sunxi: Add options for the SPL NAND configuration
Maxime Ripard
- [U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image
Maxime Ripard
- [U-Boot] [PATCH 7/7] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Boris Brezillon
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Boris Brezillon
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Boris Brezillon
- [U-Boot] [PATCH 5/7] nand: sunxi: Add options for the SPL NAND configuration
Boris Brezillon
- [U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image
Boris Brezillon
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Stephen Warren
- [U-Boot] [PATCH] Do not force master mode on unaffected PHY's
Olliver Schinagl
- [U-Boot] [PATCH 1/3] net: phy: realtek: Use the BIT() macro
Olliver Schinagl
- [U-Boot] [PATCH 2/3] net: phy: realtek: make define more concistent
Olliver Schinagl
- [U-Boot] [PATCH 3/3] net: phy: realtek: Only force master mode on rtl8211b/c
Olliver Schinagl
- [U-Boot] [PATCH v2] rpi: passthrough of the firmware provided FDT blob
Stephen Warren
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] [PATCH v3 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH v4 1/1] ARM: ts4600: add basic board support
Sebastien Bourdelin
- [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
york sun
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Dmitry Vyukov
- [U-Boot] [PATCH v3] rpi: passthrough of the firmware provided FDT blob
Cédric Schieli
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Tom Rini
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Will Deacon
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Tom Rini
- [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
york sun
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
york sun
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
york sun
- [U-Boot] [PATCH 1/4] rsa: cosmetic: rename pad_len to key_len
aduda
- [U-Boot] [PATCH 2/4] rsa: Verify RSA padding programatically
aduda
- [U-Boot] [PATCH 3/4] image: Add crypto_algo struct for RSA info
aduda
- [U-Boot] [PATCH 4/4] image: Combine image_sig_algo with image_sign_info
aduda
- [U-Boot] MMC write failed - Can't read partition table
DaveKucharczyk
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Will Deacon
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Tom Rini
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request, u-boot-tegra/master
Tom Rini
- [U-Boot] [linux-sunxi] [PATCH 2/3] net: phy: realtek: make define more concistent
Emilio López
- [U-Boot] Issues coupling am335x with VSC8601 PHY
Alex
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Will Deacon
- [U-Boot] [PATCH v2] arm: ls1021a: improve the core frequency to 1.2GHZ
Yuan Yao
- [U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
Tom Rini
- [U-Boot] [PATCH v3] armv8: fsl-layerscape: Add Readme for deploy QSPI image
Yuan Yao
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image
Yao Yuan
- [U-Boot] [PATCH] board: am335x/mux: Do not hang when encountering a bad EEPROM
Alexandru Gagniuc
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH] armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20
Priyanka Jain
- [U-Boot] [PATCH 0/3] Enable the host controller and hub on PopMetal board
Kever Yang
- [U-Boot] [PATCH 1/3] dts: popmetal: add usb host power supply node
Kever Yang
- [U-Boot] [PATCH 2/3] config: popmetal: enable the USB host controller and function
Kever Yang
- [U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init
Kever Yang
- [U-Boot] Rockchip USB driver
Kever Yang
- [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
Heiko Schocher
- [U-Boot] [PATCH] tools/kwbimage: add BAUDRATE option
Chris Packham
- [U-Boot] [PATCH] tools/kwbimage: add DEBUG option
Chris Packham
- [U-Boot] [RFC PATCH 00/10] sunxi: Allwinner A64 SPL support
Andre Przywara
- [U-Boot] [PATCH] sata: fix sata command not being executed bug
yuantian.tang at nxp.com
- [U-Boot] [PATCH 00/10] sunxi: Add basic PSCI support to enable SMP on the A80's first cluster
Chen-Yu Tsai
- [U-Boot] [PATCH 01/10] ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 02/10] sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 03/10] sunxi: Add base address of secure SRAM B for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 04/10] sunxi: Use secure SRAM B for secure RAM for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 05/10] sunxi: Add PRCM register definition for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 06/10] sunxi: Add CPUCFG register definitions for sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 07/10] sunxi: Add support for TZPC on sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 08/10] sunxi: Add basic PSCI implementation for A80
Chen-Yu Tsai
- [U-Boot] [PATCH 09/10] sunxi: Enable PSCI on sun9i/A80
Chen-Yu Tsai
- [U-Boot] [PATCH 10/10] sunxi: Add PSCI core power off support for A80's first cluster
Chen-Yu Tsai
- [U-Boot] net: use random ethernet address if invalid and not zero
Michal Simek
- [U-Boot] [linux-sunxi] [PATCH 2/3] net: phy: realtek: make define more concistent
Olliver Schinagl
- [U-Boot] [PATCH 00/10] sunxi: Add basic PSCI support to enable SMP on the A80's first cluster
Hans de Goede
- [U-Boot] [PATCH 00/10] sunxi: Add basic PSCI support to enable SMP on the A80's first cluster
Chen-Yu Tsai
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [PATCH v2 0/7] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH v2 1/7] arm: dts: Add devicetree for i.MX6UL
Jagan Teki
- [U-Boot] [PATCH v2 2/7] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v2 3/7] dm: net: fec: Add .read_rom_hwaddr
Jagan Teki
- [U-Boot] [PATCH v2 4/7] net: fec: Zap local mac variable
Jagan Teki
- [U-Boot] [PATCH v2 5/7] arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v2 6/7] arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v2 7/7] imx6: icorem6: Rename engicam icorem6 defconfig files
Jagan Teki
- [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
Ashish Kumar
- [U-Boot] [PATCH v2 1/4] serial: pxa: use kconfig for serial configuration
Marek Vasut
- [U-Boot] [PATCH v2 2/4] serial: pxa: integrate optional driver model handling
Marek Vasut
- [U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
Maxime Ripard
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Boris Brezillon
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Stephen Warren
- [U-Boot] xhci USB controller driver for x86 board
Ding, ChiX
- [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
york sun
- [U-Boot] [PATCH v3 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [PATCH 1/3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] [linux-sunxi] [PATCH 1/3] net: phy: realtek: Use the BIT() macro
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH 1/3] net: phy: realtek: Use the BIT() macro
Olliver Schinagl
- [U-Boot] xhci USB controller driver for x86 board
Kever Yang
- [U-Boot] [PATCH v8 0/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH v8 2/3] armv8: fsl-layerscape: SMP support for loading 32-bit OS
Alison Wang
- [U-Boot] [PATCH v8 3/3] armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
Alison Wang
- [U-Boot] Encryption of FIT image
Zvi Vered
- [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings
S.H. Xie
- [U-Boot] xhci USB controller driver for x86 board
Stefan Roese
- [U-Boot] [PATCHv2 01/15] configs: ls1021a: enable DT and DM support
Zhiqiang Hou
- [U-Boot] [PATCHv2 02/15] dm: pci: return the real controller in pci_bus_to_hose()
Zhiqiang Hou
- [U-Boot] [PATCHv2 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Zhiqiang Hou
- [U-Boot] [PATCHv2 04/15] arm: ls1021a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv2 05/15] arm: ls1012a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv2 06/15] armv8: ls1043a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv2 07/15] armv8: ls1046a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv2 08/15] armv8: ls2080a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv2 09/15] pci: layerscape: add pci driver based on DM
Zhiqiang Hou
- [U-Boot] [PATCHv2 10/15] arm: ls1021a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv2 11/15] arm: ls1012a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv2 12/15] armv8: ls1043a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv2 13/15] armv8: ls1046a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv2 14/15] armv8: ls2080a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv2 15/15] pci: layerscape: remove unnecessary legacy code
Zhiqiang Hou
- [U-Boot] [PATCH] serial: ns16550: Fix Debug UART initialization for AM335x
Jacob Siverskog
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Michal Simek
- [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
Heiko Schocher
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Olliver Schinagl
- [U-Boot] [PATCH] tools: fix mksunxiboot build for tools-all target
Andre Przywara
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH v3] Retrieve MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH RESEND 4/9] w1: Add 1-Wire gpio driver
Michal Simek
- [U-Boot] Add mikroBUS flash click support to the imx7
Angus Ainslie
- [U-Boot] [PATCH 1/2] imx7: SPI: add suport for SPI flash in mikroBUS slot
Angus Ainslie
- [U-Boot] [PATCH 2/2] SPI: add support for the EON EN25Q80B flash
Angus Ainslie
- [U-Boot] [PATCH] davinci: omapl138_lcdk: keep booting even when MAC address is invalid
Fabien Parent
- [U-Boot] [PATCH 1/2] imx7: SPI: add suport for SPI flash in mikroBUS slot
Jagan Teki
- [U-Boot] [PATCH] mx6ull_14x14_evk: Add README file
Diego Dorta
- [U-Boot] [PATCH 1/3 v3] fsl/ddr: Revise erratum a009942 and clean related erratum
york sun
- [U-Boot] [PATCH] mx6ull_14x14_evk: Add README file
Fabio Estevam
- [U-Boot] [PATCH] arm: sunxi: do not force USB for arch-sunxi
Yann E. MORIN
- [U-Boot] [PATCH] arm: sunxi: do not force USB for arch-sunxi
Hans de Goede
- [U-Boot] [PATCH] davinci: omapl138_lcdk: keep booting even when MAC address is invalid
Tom Rini
- [U-Boot] [PATCH v2 1/5] arm: imx: remove bmode , hdmidet and dek commands from SPL
George McCollister
- [U-Boot] [PATCH v2 2/5] arm: imx: add HAB authentication of image to SPL boot
George McCollister
- [U-Boot] [PATCH v2 3/5] tools: mkimage: add firmware-ivt image type for HAB verification
George McCollister
- [U-Boot] [PATCH v2 4/5] doc: imx6: add section for secure boot with SPL
George McCollister
- [U-Boot] [PATCH v2 5/5] Makefile: preserve output for images that can contain HAB Blocks
George McCollister
- [U-Boot] [PATCH] arm: sunxi: do not force USB for arch-sunxi
Yann E. MORIN
- [U-Boot] [PATCH] imx7: SPI: add suport for SPI flash in mikroBUS slot
Angus Ainslie
- [U-Boot] [PATCH] SPI: add support for the EON EN25Q80B flash chip
Angus Ainslie
- [U-Boot] [PATCH] mx6ull_14x14_evk: Add README file
Peng Fan
- [U-Boot] [PATCH v3] rpi: passthrough of the firmware provided FDT blob
Stephen Warren
- [U-Boot] [PATCH] mx6ull_14x14_evk: Add README file
Jagan Teki
- [U-Boot] [PATCH] imx7: SPI: add suport for SPI flash in mikroBUS slot
Jagan Teki
- [U-Boot] [PATCH] armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
Shengzhou Liu
- [U-Boot] [PATCH 4/4] sunxi: sina33: Enable the LCD
Chen-Yu Tsai
- [U-Boot] [PATCH v4 0/2] rpi: passthrough of the firmware provided FDT blob
Cédric Schieli
- [U-Boot] [PATCH v4 1/2] arm: add save_boot_params for ARM1176
Cédric Schieli
- [U-Boot] [PATCH v4 2/2] rpi: passthrough of the firmware provided FDT blob
Cédric Schieli
- [U-Boot] [PATCH] SPI: fixup typo in omap2_spi.c
Jagan Teki
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] [PATCH 2/2] ARM64: zynqmp: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] [PATCH 01/27] ARM64: zynqmp: Add clocks for LPDDMA
Michal Simek
- [U-Boot] [PATCH 02/27] ARM64: zynqmp: Added clocks to DT for ep108
Michal Simek
- [U-Boot] [PATCH 03/27] ARM64: zynqmp: Enable can1 for ep108
Michal Simek
- [U-Boot] [PATCH 04/27] ARM64: zynqmp: Enable gpio-led as heartbeat on zcu102
Michal Simek
- [U-Boot] [PATCH 05/27] ARM64: zynqmp: Add gpio-keys for zcu102
Michal Simek
- [U-Boot] [PATCH 06/27] ARM64: zynqmp: Add dcc port to dtsi
Michal Simek
- [U-Boot] [PATCH 07/27] ARM64: zynqmp: Remove note about level shifter on zcu102
Michal Simek
- [U-Boot] [PATCH 08/27] ARM64: zynqmp: DT: Remove unused DDR PM domain
Michal Simek
- [U-Boot] [PATCH 09/27] ARM64: zynqmp: DT: Remove unused PM domains for PLL
Michal Simek
- [U-Boot] [PATCH 10/27] ARM64: zynqmp: DT: Add PM domains for GPU and PCIE
Michal Simek
- [U-Boot] [PATCH 11/27] ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domain
Michal Simek
- [U-Boot] [PATCH 12/27] ARM64: zynqmp: pci: Updating device tree as per upstream
Michal Simek
- [U-Boot] [PATCH 13/27] ARM64: zynqmp: Remove xlnx,id property
Michal Simek
- [U-Boot] [PATCH 14/27] ARM64: zynqmp: Sync gpio node properties
Michal Simek
- [U-Boot] [PATCH 15/27] ARM64: zynqmp: drm: Add DMA index
Michal Simek
- [U-Boot] [PATCH 16/27] Revert "ARM64: zynqmp: Add serdes address space dp driver"
Michal Simek
- [U-Boot] [PATCH 17/27] ARM64: zynqmp: Add cortexa53 edac node
Michal Simek
- [U-Boot] [PATCH 18/27] ARM64: zynqmp: Add support for zynqmp fpga manager
Michal Simek
- [U-Boot] [PATCH 19/27] ARM64: zynqmp: List all SMMU ids
Michal Simek
- [U-Boot] [PATCH 20/27] ARM64: zynqmp: change sdhci compatible string.
Michal Simek
- [U-Boot] [PATCH 21/27] Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"
Michal Simek
- [U-Boot] [PATCH 22/27] ARM64: zynqmp: Add device tree properties for ZynqMP GT core
Michal Simek
- [U-Boot] [PATCH 23/27] ARM64: zynqmp: Add ocm node in dtsi
Michal Simek
- [U-Boot] [PATCH 24/27] ARM64: zynqmp: Use 64bit size cell format for main amba bus
Michal Simek
- [U-Boot] [PATCH 25/27] ARM64: zynqmp: Add description for LPDDMA channel usage
Michal Simek
- [U-Boot] [PATCH 26/27] ARM64: zynqmp: Add clocks for LPDDMA
Michal Simek
- [U-Boot] [PATCH 27/27] ARM64: zynqmp: Adding prefetchable memory space to pcie
Michal Simek
- [U-Boot] [PATCH v8 0/3] armv8: Support loading 32-bit OS in AArch32 execution state
Ryan Harkin
- [U-Boot] [PATCH v3 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node
Jagan Teki
- [U-Boot] [PATCH v3 2/2] spi: ti_qspi: Fix baudrate divider calculation
Jagan Teki
- [U-Boot] [PATCH v8 0/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Tom Rini
- [U-Boot] [PATCH] board: am335x/mux: Do not hang when encountering a bad EEPROM
Tom Rini
- [U-Boot] [PATCH v3 3/5] ARMv8: Add basic PSCI framework
Tom Rini
- [U-Boot] [PATCH v3 4/5] ARMv8: Setup PSCI memory and device tree
Tom Rini
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Tom Rini
- [U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
Tom Rini
- [U-Boot] U-Boot overlaps BSS and initrd on arm64
Tom Rini
- [U-Boot] [PATCH] api: Use hashtable function for API_env_enum
Simon Glass
- [U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information
Simon Glass
- [U-Boot] [PATCH] evb-rk3399: deduced the dram node size when space reserved
Simon Glass
- [U-Boot] [PATCH] config: evb-rk3399: enable PWM_ROCKCHIP
Simon Glass
- [U-Boot] [PATCH 1/4] config: rk3036: enable configs for USB HOST
Simon Glass
- [U-Boot] [PATCH 2/4] config: rk3036: enable fix regulator
Simon Glass
- [U-Boot] [PATCH 3/4] dts: arm: rk3036: add usb vbus node
Simon Glass
- [U-Boot] [PATCH 4/4] rk3036: enable the vbus regulator when borad_init
Simon Glass
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH 4/9] w1: Add 1-Wire gpio driver
Simon Glass
- [U-Boot] [PATCH 3/9] w1: Add 1-Wire uclass
Simon Glass
- [U-Boot] [PATCH RESEND 5/9] EEPROM: Add an EEPROM uclass
Simon Glass
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Simon Glass
- [U-Boot] [PATCH 10/11] tools: Allow crc8 to be used
Simon Glass
- [U-Boot] [PATCH 1/4] rsa: cosmetic: rename pad_len to key_len
Simon Glass
- [U-Boot] [PATCH 2/4] rsa: Verify RSA padding programatically
Simon Glass
- [U-Boot] [PATCH 3/4] image: Add crypto_algo struct for RSA info
Simon Glass
- [U-Boot] [PATCH 4/4] image: Combine image_sig_algo with image_sign_info
Simon Glass
- [U-Boot] [PATCH 1/3] dts: popmetal: add usb host power supply node
Simon Glass
- [U-Boot] [PATCH 2/3] config: popmetal: enable the USB host controller and function
Simon Glass
- [U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init
Simon Glass
- [U-Boot] [PATCH] serial: ns16550: Fix Debug UART initialization for AM335x
Simon Glass
- [U-Boot] [PATCHv2 02/15] dm: pci: return the real controller in pci_bus_to_hose()
Simon Glass
- [U-Boot] [PATCHv2 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Simon Glass
- [U-Boot] [PATCHv2 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] Rockchip USB driver
Simon Glass
- [U-Boot] [PATCH 11/11] tools: Add tool to add crc8 to a mac address
Simon Glass
- [U-Boot] [PATCH] sata: fix sata command not being executed bug
Simon Glass
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Tom Rini
- [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro
Tom Rini
- [U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
Tom Rini
- [U-Boot] [PATCH v4 1/2] arm: add save_boot_params for ARM1176
Stephen Warren
- [U-Boot] [PATCH v4 2/2] rpi: passthrough of the firmware provided FDT blob
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Tom Rini
- [U-Boot] [PATCH 26/27] ARM64: zynqmp: Add clocks for LPDDMA
Soren Brinkmann
- [U-Boot] [PATCH v3] imx7: SPI: add suport for SPI flash in mikroBUS slot
Angus Ainslie
- [U-Boot] sunxi board: why MMC dev are swapped ?
Mylene Josserand
- [U-Boot] [PATCH RESEND 5/9] EEPROM: Add an EEPROM uclass
Moritz Fischer
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Moritz Fischer
- [U-Boot] xhci USB controller driver for x86 board
Marek Vasut
- [U-Boot] [PATCH 3/3] test/py: Create tests for ext4 and fat testing on sandbox
Simon Glass
- [U-Boot] [PATCH RESEND 4/9] w1: Add 1-Wire gpio driver
Maxime Ripard
- [U-Boot] [PATCH 1/4] rsa: cosmetic: rename pad_len to key_len
Andrew Duda
- [U-Boot] [PATCH 2/4] rsa: Verify RSA padding programatically
Andrew Duda
- [U-Boot] sunxi board: why MMC dev are swapped ?
Maxime Ripard
- [U-Boot] [PATCH 0/3] Hi all,
Stefan Agner
- [U-Boot] [PATCH 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [PATCH 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Stefan Agner
- [U-Boot] [PATCH 3/3] spl: add USB Gadget config option
Stefan Agner
- [U-Boot] [PATCH 0/3] Hi all,
Marek Vasut
- [U-Boot] [PATCH 0/3] Hi all,
Stefan Agner
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Alexander Graf
- [U-Boot] [PATCH 0/3] Hi all,
Marek Vasut
- [U-Boot] [PATCH] usb: check udev before dereferencing
Anatolij Gustschin
- [U-Boot] [PATCH] video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabled
Stefan Roese
- [U-Boot] [PATCH] usb: check udev before dereferencing
Marek Vasut
- [U-Boot] sunxi board: why MMC dev are swapped ?
Hans de Goede
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback
Marek Vasut
- [U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback
Hannes Schmelzer
- [U-Boot] OMAP3 Falcon Mode NAND Unlock
Adam Ford
- [U-Boot] [PATCH] usb: check udev before dereferencing
Anatolij Gustschin
- [U-Boot] [PATCH] usb: check udev before dereferencing
Marek Vasut
- [U-Boot] [PATCH] tools: imximage: refactor header length calculations for imximage v1
Martin Kaiser
- [U-Boot] [PATCH 0/3] Hi all,
Stefan Agner
- [U-Boot] [PATCH 0/3] Hi all,
Marek Vasut
- [U-Boot] [PATCH v2 0/3] spl: USB Gadget cleanup
Stefan Agner
- [U-Boot] [PATCH v2 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [PATCH v2 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 3/3] spl: add USB Gadget config option
Stefan Agner
- [U-Boot] [PATCH] video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabled
Anatolij Gustschin
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode
Adam Ford
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Remove FIT Support
Adam Ford
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Update MTD Partition Table
Adam Ford
- [U-Boot] Please pull: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] sunxi: Use the available Kconfig option for AHCI
Hans de Goede
- [U-Boot] [PATCH] arm: sunxi: do not force USB for arch-sunxi
Hans de Goede
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Hans de Goede
- [U-Boot] [PATCH] sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
Hans de Goede
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Hans de Goede
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Hans de Goede
- [U-Boot] [PATCH 3/4] sunxi: sina33: Enable the eMMC
Hans de Goede
- [U-Boot] [PATCH 4/4] sunxi: sina33: Enable the LCD
Hans de Goede
- [U-Boot] [PATCH] sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Hans de Goede
- [U-Boot] [PATCH 01/10] ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 02/10] sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 03/10] sunxi: Add base address of secure SRAM B for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 04/10] sunxi: Use secure SRAM B for secure RAM for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 05/10] sunxi: Add PRCM register definition for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 06/10] sunxi: Add CPUCFG register definitions for sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 07/10] sunxi: Add support for TZPC on sun9i/A80
Hans de Goede
- [U-Boot] [PATCH 08/10] sunxi: Add basic PSCI implementation for A80
Hans de Goede
- [U-Boot] [PATCH 09/10] sunxi: Enable PSCI on sun9i/A80
Hans de Goede
- [U-Boot] [PATCH] tools: fix mksunxiboot build for tools-all target
Hans de Goede
- [U-Boot] FDT retrived varaibles appear to have different properties fom other u-boot variables
dh at synoia.com
- [U-Boot] [PATCH] sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Ian Campbell
- [U-Boot] tools: fix mksunxiboot build for tools-all target
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] arm: print the cache config option in hex instead of decimal
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode
Tom Rini
- [U-Boot] ARM: keystone2: PLL: Enable glitch free initialization sequence
Tom Rini
- [U-Boot] ARM: k2g: Update PLL Multiplier and divider values
Tom Rini
- [U-Boot] [U-Boot, PATCHv2, 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Tom Rini
- [U-Boot] [U-Boot,PATCHv2,2/3] igep00x0: consolidate defconfigs
Tom Rini
- [U-Boot] [U-Boot,PATCHv2,3/3] igep00x0: add Hynix timings
Tom Rini
- [U-Boot] board: am335x/mux: Do not hang when encountering a bad EEPROM
Tom Rini
- [U-Boot] davinci: omapl138_lcdk: keep booting even when MAC address is invalid
Tom Rini
- [U-Boot] mx6ull_14x14_evk: Add README file
Tom Rini
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Yann E. MORIN
- [U-Boot] Please pull: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH v2 00/22] rockchip: Add support for Asus Chromebit
Simon Glass
- [U-Boot] [PATCH v2 01/22] rockchip: video: Correct HDMI data source selection
Simon Glass
- [U-Boot] [PATCH v2 02/22] rockchip: video: Correct VOP clock selection
Simon Glass
- [U-Boot] [PATCH v2 03/22] rockchip: Allow jerry to use of-platdata
Simon Glass
- [U-Boot] [PATCH v2 04/22] dm: core: Handle global_data moving in SPL
Simon Glass
- [U-Boot] [PATCH v2 05/22] stdio: Correct code style nits
Simon Glass
- [U-Boot] [PATCH v2 06/22] stdio: Correct numbering logic in stdio_probe_device()
Simon Glass
- [U-Boot] [PATCH v2 07/22] spi: Add of-platdata support to SPI and SPI flash
Simon Glass
- [U-Boot] [PATCH v2 08/22] rockchip: spi: Add support for of-platdata
Simon Glass
- [U-Boot] [PATCH v2 09/22] rockchip: spi: Honour the deactivation delay
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v2 11/22] spi: Add a debug() on bind failure
Simon Glass
- [U-Boot] [PATCH v2 12/22] video: Use cache-alignment in video_sync()
Simon Glass
- [U-Boot] [PATCH v2 13/22] video: Track whether a display is in use
Simon Glass
- [U-Boot] [PATCH v2 14/22] rockchip: video: Check for device in use
Simon Glass
- [U-Boot] [PATCH v2 15/22] rockchip: Move jerry to use of-platdata
Simon Glass
- [U-Boot] [PATCH v2 16/22] rockchip: Rename jerry files to veyron
Simon Glass
- [U-Boot] [PATCH v2 17/22] rockchip: veyron: Add a note about the SDRAM voltage
Simon Glass
- [U-Boot] [PATCH v2 18/22] rockchip: Move jerry SDRAM settings into its own .dts file
Simon Glass
- [U-Boot] [PATCH v2 19/22] rockchip: clk: Support setting ACLK
Simon Glass
- [U-Boot] [PATCH v2 20/22] rockchip: veyron: Adjust ARM clock after relocation
Simon Glass
- [U-Boot] [PATCH v2 21/22] rockchip: video: Avoid using u8 in the HDMI driver
Simon Glass
- [U-Boot] [PATCH v2 22/22] rockchip: Add support for veyron-mickey (Chromebit)
Simon Glass
- [U-Boot] [PATCH] rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)
Simon Glass
- [U-Boot] [PATCH v2 0/4] buildman: Threading and output improvements
Simon Glass
- [U-Boot] [PATCH v2 1/4] Makefile: Add a target to create the .cfg files
Simon Glass
- [U-Boot] [PATCH v2 2/4] buildman: Add an option to just create the config
Simon Glass
- [U-Boot] [PATCH v2 3/4] buildman: Add documentation for CONFIG checking
Simon Glass
- [U-Boot] [PATCH v2 4/4] buildman: Squash useless output from -K
Simon Glass
- [U-Boot] [PATCH] fastboot: simplify the Kconfig logic
Yann E. MORIN
- [U-Boot] [PATCH] spl: mmc: fix build without CONFIG_SPL_LIBCOMMON_SUPPORT
Yann E. MORIN
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Tom Rini
- [U-Boot] [PATCH] spl: mmc: fix build without CONFIG_SPL_LIBCOMMON_SUPPORT
Tom Rini
- [U-Boot] FDT retrived varaibles appear to have different properties fom other u-boot variables - and are corrupted on get, set, get sequence
dh at synoia.com
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Jaehoon Chung
- [U-Boot] [PATCH v8 0/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH v3 3/5] ARMv8: Add basic PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH] net: fman: fix 2.5G SGMII settings
shh.xie at gmail.com
- [U-Boot] [PATCH 26/27] ARM64: zynqmp: Add clocks for LPDDMA
Michal Simek
- [U-Boot] [PATCH] [resend] net: fman: fix 2.5G SGMII settings
shh.xie at gmail.com
- [U-Boot] [PATCHv2 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Z.Q. Hou
- [U-Boot] [PATCHv2 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCH] [resend] net: fman: fix 2.5G SGMII settings
Shaohui Xie
- [U-Boot] [PATCH] imx: mx6sx: Disable ENET clock before switching clock parent
Stefano Babic
- [U-Boot] [PATCH] imx: mx6ull: update the REFTOP_VBGADJ setting
Stefano Babic
- [U-Boot] [PATCH 0/4] mx35, flea3: updates for the imx35 based flea3 board
Stefano Babic
- [U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM
Stefano Babic
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Mugunthan V N
- [U-Boot] [U-Boot, v2, 2/5] ARM: bcm283x: Implement EFI RTS reset_system
Alexander Graf
- [U-Boot] [U-Boot, v2, 5/5] bcm2835: Reserve the spin table in efi memory map
Alexander Graf
- [U-Boot] [U-Boot, v2, 4/5] bcm2835 video: Map frame buffer as 32bpp
Alexander Graf
- [U-Boot] [U-Boot, v2, 4/5] bcm2835 video: Map frame buffer as 32bpp
Alexander Graf
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Lokesh Vutla
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Hans de Goede
- [U-Boot] [PATCH 4/4] rk3036: enable the vbus regulator when borad_init
Kever Yang
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Jaehoon Chung
- [U-Boot] [PATCH 4/4] sunxi: sina33: Enable the LCD
Jaehoon Chung
- [U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
Hans de Goede
- [U-Boot] [PATCH 1/7] sunxi: Sync GR8 DTS and AXP209 with the kernel
Hans de Goede
- [U-Boot] [PATCH 2/7] mtd: nand: add support for the TC58NVG2S0H chip
Hans de Goede
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Hans de Goede
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Hans de Goede
- [U-Boot] [PATCH 5/7] nand: sunxi: Add options for the SPL NAND configuration
Hans de Goede
- [U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image
Hans de Goede
- [U-Boot] [PATCH 7/7] sunxi: Add support for the CHIP Pro
Hans de Goede
- [U-Boot] [PATCH 00/10] sunxi: Add basic PSCI support to enable SMP on the A80's first cluster
Chen-Yu Tsai
- [U-Boot] [PATCH] Do not force master mode on unaffected PHY's
Hans de Goede
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Hans de Goede
- [U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image
Hans de Goede
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Hans de Goede
- [U-Boot] [PATCH] MAINTAINERS: mark sunxi status as Orphan
Hans de Goede
- [U-Boot] [PATCH 1/4] mmc: Retry the switch command
Jaehoon Chung
- [U-Boot] [PATCH 2/4] mmc: sunxi: Enable 8bits bus width for sun8i
Jaehoon Chung
- [U-Boot] [PATCH 3/4] sunxi: sina33: Enable the eMMC
Jaehoon Chung
- [U-Boot] [PATCH 4/4] sunxi: sina33: Enable the LCD
Jaehoon Chung
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Stefan Roese
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Tom Rini
- [U-Boot] [PATCH 4/9] w1: Add 1-Wire gpio driver
Maxime Ripard
- [U-Boot] [PATCH RESEND 5/9] EEPROM: Add an EEPROM uclass
Maxime Ripard
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Maxime Ripard
- [U-Boot] [PATCH] MAINTAINERS: mark sunxi status as Orphan
Ian Campbell
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] [PATCH] socfpga: add support for Terasic DE1-SoC board
Anatolij Gustschin
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Hans de Goede
- [U-Boot] [PATCH] socfpga: add support for Terasic DE1-SoC board
Marek Vasut
- [U-Boot] [PATCH] net: phy: micrel: Fix error handling
Marek Vasut
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH] Do not force master mode on unaffected PHY's
Olliver Schinagl
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Hans de Goede
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH] Do not force master mode on unaffected PHY's
Hans de Goede
- [U-Boot] [PATCH] Do not force master mode on unaffected PHY's
Olliver Schinagl
- [U-Boot] [PATCH] socfpga: add support for Terasic DE1-SoC board
Anatolij Gustschin
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Hans de Goede
- [U-Boot] [PATCH] socfpga: add support for Terasic DE1-SoC board
Marek Vasut
- [U-Boot] [PATCH v2] socfpga: add support for Terasic DE1-SoC board
Anatolij Gustschin
- [U-Boot] [PATCH v2] socfpga: add support for Terasic DE1-SoC board
Marek Vasut
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Tom Rini
- [U-Boot] [PATCH] dfu: dfu_sf: Fix read offset
Phil Edworthy
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] [PATCH] dfu: dfu_sf: Fix read offset
Fabio Estevam
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Tom Rini
- [U-Boot] [PATCH] dfu: dfu_sf: Fix read offset
Lukasz Majewski
- [U-Boot] MAINTAINERS: mark sunxi status as Orphan
Tom Rini
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Jagan Teki
- [U-Boot] [ANN] U-Boot v2016.11 is released
Tom Rini
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Andre Przywara
- [U-Boot] [PATCH 1/6][v3] armv8: lsch3: Add generic get_svr() in assembly
york sun
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Tom Rini
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Yann E. MORIN
- [U-Boot] [v2, 2/5] mmc: send STOP command when the READ/WRITE commands fail
york sun
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Tom Rini
- [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization
york sun
- [U-Boot] FDT retrived varaibles appear to have different properties fom other u-boot variables - and are corrupted on get, set, get correction
dh at synoia.com
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
york sun
- [U-Boot] [PATCH v2 1/3] SECURE_BOOT: Enable chain of trust on LS1046A platform
york sun
- [U-Boot] [PATCH v2 2/3] LS1046AQDS: Add NOR Secure Boot Target
york sun
- [U-Boot] [ANN] U-Boot v2016.11 is released
Jagan Teki
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
york sun
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Siarhei Siamashka
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Siarhei Siamashka
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder
Tom Rini
- [U-Boot] [PATCH 1/4] rsa: cosmetic: rename pad_len to key_len
Simon Glass
- [U-Boot] [PATCH 2/4] rsa: Verify RSA padding programatically
Simon Glass
- [U-Boot] [PATCH v2 0/4] Allow disabling non-FIT image loading from SPL
Andrew F. Davis
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Andrew F. Davis
- [U-Boot] [PATCH v2 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices
Andrew F. Davis
- [U-Boot] [PATCH v2 3/4] ARM: AM437x: Disable non-FIT based image loading for HS devices
Andrew F. Davis
- [U-Boot] [PATCH v2 4/4] ARM: DRA7xx: Disable non-FIT based image loading for HS devices
Andrew F. Davis
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
André Przywara
- [U-Boot] [RFC 0/1] Add TEE loading support to FIT image
Andrew F. Davis
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Andrew F. Davis
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Tom Rini
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Maxime Ripard
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Maxime Ripard
- [U-Boot] [PATCH v3 0/4] serial: pxa: kconfig and optional driver model integration
Marcel Ziswiler
- [U-Boot] [PATCH v3 1/4] serial: pxa: use kconfig for serial configuration
Marcel Ziswiler
- [U-Boot] [PATCH v3 2/4] serial: pxa: integrate optional driver model handling
Marcel Ziswiler
- [U-Boot] [PATCH v3 3/4] colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason
Marcel Ziswiler
- [U-Boot] [PATCH v3 4/4] colibri_pxa270: transition to driver model for serial
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/3] spl: add RAM boot device only if it is actually defined
Simon Glass
- [U-Boot] [PATCH v2 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Simon Glass
- [U-Boot] [PATCH] usb: check udev before dereferencing
Simon Glass
- [U-Boot] [PATCH] fastboot: simplify the Kconfig logic
Simon Glass
- [U-Boot] [PATCHv2 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Simon Glass
- [U-Boot] [PATCH 4/4] rk3036: enable the vbus regulator when borad_init
Simon Glass
- [U-Boot] [PATCH 4/9] w1: Add 1-Wire gpio driver
Simon Glass
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Simon Glass
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Simon Glass
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Simon Glass
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Simon Glass
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Simon Glass
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Alexander Graf
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Maxime Ripard
- [U-Boot] [PATCH v3 0/4] serial: pxa: kconfig and optional driver model integration
Marek Vasut
- [U-Boot] [PATCH V2] Add support of ls1021a-iot
york sun
- [U-Boot] [PATCH RESEND 6/9] eeprom: Add DS2431 support
Simon Glass
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
york sun
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Alexander Graf
- [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program
Simon Glass
- [U-Boot] [PATCH v6 2/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node
york sun
- [U-Boot] [PATCH v4 00/14] efi: x86: Add EFI hello world and loader support for x86
Simon Glass
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Andrew F. Davis
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Andrew F. Davis
- [U-Boot] [ANN] U-Boot v2016.11 is released
Wolfgang Denk
- [U-Boot] [PULL 00/16] efi patch queue 2016-11-14
Alexander Graf
- [U-Boot] [PATCH v2 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [U-Boot, v4, 01/14] x86: Correct a build warning in x86 tables
Alexander Graf
- [U-Boot] [U-Boot,v4,14/14] x86: Enable EFI loader support
Alexander Graf
- [U-Boot] [U-Boot, v4, 04/14] x86: Tidy up selection of building the EFI stub
Alexander Graf
- [U-Boot] [U-Boot, v4, 12/14] x86: Move efi .S files into the 'lib' directory
Alexander Graf
- [U-Boot] [U-Boot, v4, 07/14] elf: arm: Add a few ARM relocation types
Alexander Graf
- [U-Boot] [U-Boot, v4, 11/14] x86: Move efi .lds files into the 'lib' directory
Alexander Graf
- [U-Boot] [U-Boot, v4, 06/14] efi: Add support for a hello world test program
Alexander Graf
- [U-Boot] [U-Boot,v4,02/14] efi: Correct cache flush alignment
Alexander Graf
- [U-Boot] [U-Boot,v4,08/14] efi: arm: Add EFI app support
Alexander Graf
- [U-Boot] [U-Boot, v4, 13/14] efi: x86: Adjust EFI files support efi_loader
Alexander Graf
- [U-Boot] [U-Boot, v4, 09/14] efi: arm: Add aarch64 EFI app support
Alexander Graf
- [U-Boot] [U-Boot, v4, 03/14] efi: Fix debug message address format
Alexander Graf
- [U-Boot] [U-Boot, v4, 05/14] efi: Makefile: Export variables for use with EFI
Alexander Graf
- [U-Boot] [PATCH v4 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
Stefan Agner
- [U-Boot] [PATCH v2 1/3] spl: add RAM boot device only if it is actually defined
Simon Glass
- [U-Boot] [PATCH v2 1/4] Introduce CONFIG_SPL_ABORT_ON_NON_FIT_IMAGE
Simon Glass
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Simon Glass
- [U-Boot] [PATCH V2] Add support of ls1021a-iot
Feng Li
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Stefan Agner
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [PATCH] fsl/usb: enable usb feature for ls1046ardb
jerry.huang at nxp.com
- [U-Boot] [PATCH] net: use random ethernet address if invalid and not zero
Joe Hershberger
- [U-Boot] [PATCH 2/3] net: phy: realtek: make define more concistent
Joe Hershberger
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH 02/11] net: sunxi-emac: Write HW address via function
Joe Hershberger
- [U-Boot] [PATCH 03/11] net: sunxi-emac: Add write_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH v1 1/3] net: Kconfig: Add CONFIG_MACB option
Joe Hershberger
- [U-Boot] [PATCH v2 2/3] net: macb: Add the clock support
Joe Hershberger
- [U-Boot] [PATCH v2 3/7] net: stm32: add designware mac glue code for stm32
Joe Hershberger
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Joe Hershberger
- [U-Boot] [PATCH 04/11] net: sunxi-emac: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH 1/3] net: phy: realtek: Use the BIT() macro
Joe Hershberger
- [U-Boot] [PATCH 06/11] arm: sunxi: Use read_rom_hwaddr() to obtain MAC address
Joe Hershberger
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Joe Hershberger
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Joe Hershberger
- [U-Boot] [PATCH 11/11] tools: Add tool to add crc8 to a mac address
Joe Hershberger
- [U-Boot] [PATCH] net: write enetaddr down to hardware on env_callback
Joe Hershberger
- [U-Boot] [PATCH 3/3] net: phy: realtek: Only force master mode on rtl8211b/c
Joe Hershberger
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Z.Q. Hou
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Joe Hershberger
- [U-Boot] [PATCH] [resend] net: fman: fix 2.5G SGMII settings
Joe Hershberger
- [U-Boot] [PATCH] net: phy: micrel: Fix error handling
Joe Hershberger
- [U-Boot] [PATCH][v2] driver: net: ldpaa_eth: Fix missing bracket issue
Joe Hershberger
- [U-Boot] [PATCH 1/3] dts: rk3288: correct sdram setting for miniarm
Jacob Chen
- [U-Boot] [PATCH 2/3] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Jacob Chen
- [U-Boot] [PATCH 3/3] rockchip: configs: make rk3036 env config same with rk3288
Jacob Chen
- [U-Boot] [PATCH v2 1/3] SECURE_BOOT: Enable chain of trust on LS1046A platform
Sumit Garg
- [U-Boot] [PATCH v2 2/3] LS1046AQDS: Add NOR Secure Boot Target
Sumit Garg
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH 2/7] mtd: nand: add support for the TC58NVG2S0H chip
Scott Wood
- [U-Boot] [PATCH 5/7] nand: sunxi: Add options for the SPL NAND configuration
Scott Wood
- [U-Boot] [PATCH] nand: force BBT scan for controllers which need it
Scott Wood
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Mugunthan V N
- [U-Boot] [PATCH] cmd/nand.c: Debug additional helpful NAND info
Scott Wood
- [U-Boot] [PATCH][v2] net: fman: fix 2.5G SGMII settings
Shaohui Xie
- [U-Boot] [PATCH v5 02/21] sf: Simplify lock ops detection code
Jagan Teki
- [U-Boot] [PATCH] sata: fix sata command not being executed bug
Y.T. Tang
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Michal Simek
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Alison Wang
- [U-Boot] [PATCH v5 04/21] sf: Cleanup spi_flash_info{}
Jagan Teki
- [U-Boot] [PATCH v5 13/21] sf: Rename sf_params.c to spi_flash_ids
Jagan Teki
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Thomas Abraham
- [U-Boot] [PATCH v5 17/21] spi: Remove dual flash code
Jagan Teki
- [U-Boot] [PATCH v5 05/21] sf: Cleanup sf_params
Jagan Teki
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Michal Simek
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Alison Wang
- [U-Boot] [PATCH 08/11] net: sunxi: Allow sunxi boards to set the MAC from an EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 11/11] tools: Add tool to add crc8 to a mac address
Olliver Schinagl
- [U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init
Kever Yang
- [U-Boot] [PATCH v2 0/3] spl: USB Gadget cleanup
B, Ravi
- [U-Boot] [PATCH] rockchip: configs: correct partitions 'boot' size
Jacob Chen
- [U-Boot] [PATCH 01/15] arm64: mvebu: Rename db-88f7040 files to armada-8k
Stefan Roese
- [U-Boot] [PATCH 02/15] arm64: mvebu: Add Armada-80x0 dts/dtsi files
Stefan Roese
- [U-Boot] [PATCH 03/15] arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 board
Stefan Roese
- [U-Boot] [PATCH 04/15] arm64: mvebu: Add slave CP area to the memory map
Stefan Roese
- [U-Boot] [PATCH 05/15] arm64: mvebu: Add support for the DB-88F8040 Armada 8k devel board
Stefan Roese
- [U-Boot] [PATCH 06/15] arm64: mvebu: armada-cp110-master.dtsi: Rename comphy DT node names
Stefan Roese
- [U-Boot] [PATCH 07/15] arm64: mvebu: armada-cp110-slave.dtsi: Add COMPHY / UTMI device tree nodes
Stefan Roese
- [U-Boot] [PATCH 08/15] arm64: mvebu: armada-8040-db.dts: Add COMPHY configuration
Stefan Roese
- [U-Boot] [PATCH 09/15] arm64: mvebu: armada-8040-db.dts: Add I2C and SPI aliases
Stefan Roese
- [U-Boot] [PATCH 10/15] arm64: mvebu: Init COMPHY from the slave-CP on the A8k
Stefan Roese
- [U-Boot] [PATCH 11/15] drivers/phy: marvell: Add support for the slave CP COMPHY device
Stefan Roese
- [U-Boot] [PATCH 12/15] pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese
- [U-Boot] [PATCH 13/15] arm64: mvebu: Add regions for PCI spaces to the memory map
Stefan Roese
- [U-Boot] [PATCH 14/15] arm64: mvebu: Add PCI support to DB-88F8040 board
Stefan Roese
- [U-Boot] [PATCH 15/15] arm64: mvebu: Restrict memory size to a usable maximum
Stefan Roese
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Hans de Goede
- [U-Boot] [PATCH 1/4] fsl/ddr: Fix compiling warning
Shengzhou Liu
- [U-Boot] [PATCH 2/4] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH 3/4] fsl/ddr: Enable erratum-a009942 workaround for B/T-series
Shengzhou Liu
- [U-Boot] [PATCH 4/4] fsl/board/ddr: optimize board-specific cpo for erratum A-009942
Shengzhou Liu
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Hans de Goede
- [U-Boot] [PATCH] armv8/layerscape: remove unnecessary function declares
Minghuan Lian
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
Yao Yuan
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] setenv with semicolon inside
Andy Shevchenko
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Max Krummenacher
- [U-Boot] [PATCH 11/11] tools: Add tool to add crc8 to a mac address
Olliver Schinagl
- [U-Boot] reboot freeze due to wachdog
Arthur LAMBERT
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Olliver Schinagl
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Hans de Goede
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Olliver Schinagl
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Olliver Schinagl
- [U-Boot] [PATCH 1/6][v3] armv8: lsch3: Add generic get_svr() in assembly
Priyanka Jain
- [U-Boot] [PATCH] drivers: SPI: sunxi SPL: fix warning
Andre Przywara
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Hans de Goede
- [U-Boot] [PATCH] video: bcm2835: add support for reading from the video-mode environment variable
Brian Masney
- [U-Boot] [PATCH 07/11] net: sunxi: Do not inject ethernet addresses into the env
Olliver Schinagl
- [U-Boot] New UCLASS_PINCTRL driver - probe is not called for all nodes
Konstantin Porotchkin
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Tom Rini
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Tom Rini
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Andrew F. Davis
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Yann E. MORIN
- [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties
Andreas Färber
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Andrew F. Davis
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Stefan Agner
- [U-Boot] [GIT PULL] Xilinx changes
Michal Simek
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Marek Vasut
- [U-Boot] [PATCH] arm: mx6: specify SPL padding
Stefan Agner
- [U-Boot] [PATCH v2] arm: mx6: specify SPL padding
Stefan Agner
- [U-Boot] [PATCH] nand: force BBT scan for controllers which need it
Stefan Agner
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] Fixed clock driver (clk: convert API to match reset/mailbox style)
Michal Simek
- [U-Boot] Fixed clock driver (clk: convert API to match reset/mailbox style)
Simon Glass
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH v2 0/3] spl: USB Gadget cleanup
Stefan Agner
- [U-Boot] [PATCH v3 0/3] spl: USB Gadget cleanup
Stefan Agner
- [U-Boot] [PATCH v3 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [PATCH v3 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Stefan Agner
- [U-Boot] [PATCH v3 3/3] spl: add USB Gadget config option
Stefan Agner
- [U-Boot] [PATCH v3 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Brüns, Stefan
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
york sun
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH] buildman: Clean up odd characters on the terminal
Simon Glass
- [U-Boot] [PATCH] sata: fix sata command not being executed bug
Simon Glass
- [U-Boot] [RFC 1/1] image: Add TEE loading to FIT loadable processing
Simon Glass
- [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties
Simon Glass
- [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file
Simon Glass
- [U-Boot] [PATCH v4 00/11] binman: A tool for creating firmware images
Simon Glass
- [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards
Simon Glass
- [U-Boot] [PATCH v4 08/11] binman: Allow configuration options to be used in .dts files
Simon Glass
- [U-Boot] [GIT PULL] Xilinx changes
Masahiro Yamada
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Masahiro Yamada
- [U-Boot] [PATCH 00/12] Fix GCC 6.2 compiler warnings
Andre Przywara
- [U-Boot] [PATCH 01/12] ls2080aqds: eth: add missing braces
Andre Przywara
- [U-Boot] [PATCH 02/12] mtd: cfi_flash: fix indentation
Andre Przywara
- [U-Boot] [PATCH 03/12] net: e1000: fix indentation
Andre Przywara
- [U-Boot] [PATCH 04/12] net: ldpaa_eth: add missing braces
Andre Przywara
- [U-Boot] [PATCH 05/12] net: rtl8169: remove unneeded definition
Andre Przywara
- [U-Boot] [PATCH 06/12] marvell: comphy_a3700: fix bitmask
Andre Przywara
- [U-Boot] [PATCH 07/12] usb: eth: r8152_fw: fix indentation
Andre Przywara
- [U-Boot] [PATCH 08/12] davinci: da8xxevm: fix indentation
Andre Przywara
- [U-Boot] [PATCH 09/12] phy: micrel: add missing braces
Andre Przywara
- [U-Boot] [PATCH 10/12] cmd: tpm_test: fix indentation
Andre Przywara
- [U-Boot] [PATCH 11/12] Xilinx ZynqMP: fix minimum SDHCI frequency
Andre Przywara
- [U-Boot] [PATCH 12/12] usb: gadget: remove unused shortname variable
Andre Przywara
- [U-Boot] [PATCH] sun8i_emac: Fix mdio read sequence
Andre Przywara
- [U-Boot] setenv with semicolon inside
Andy Shevchenko
- [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
Jagan Teki
- [U-Boot] [PATCH v6 2/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node
Wenbin Song
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Z.Q. Hou
- [U-Boot] [PATCH v6 00/21] sf: Updates on flash detection
Jagan Teki
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Jagan Teki
- [U-Boot] [PATCH v6 02/21] sf: Simplify lock ops detection code
Jagan Teki
- [U-Boot] [PATCH v6 03/21] sf: sandbox: Use JEDEC_MFR|ID in id exctract
Jagan Teki
- [U-Boot] [PATCH v6 04/21] sf: Cleanup spi_flash_info{}
Jagan Teki
- [U-Boot] [PATCH v6 05/21] sf: nr_sectors -> n_sectors
Jagan Teki
- [U-Boot] [PATCH v6 06/21] sf: Add SPI_FLASH_MAX_ID_LEN
Jagan Teki
- [U-Boot] [PATCH v6 07/21] sf: Increase max id length by 1 byte
Jagan Teki
- [U-Boot] [PATCH v6 08/21] sf: Add INFO6 flash_info macro
Jagan Teki
- [U-Boot] [PATCH v6 09/21] sf: params: Add S25FS256S_64K spi flash support
Jagan Teki
- [U-Boot] [PATCH v6 10/21] sf: Remove legacy idcode detection code
Jagan Teki
- [U-Boot] [PATCH v6 11/21] sf: Remove non-meaningful comments
Jagan Teki
- [U-Boot] [PATCH v6 12/21] sf: Rename sf_params.c to spi_flash_ids.c
Jagan Teki
- [U-Boot] [PATCH v6 13/21] sf: ids: Use small letter's with flash name
Jagan Teki
- [U-Boot] [PATCH v6 14/21] sf: ids: Use small letter in ext_jedec
Jagan Teki
- [U-Boot] [PATCH v6 15/21] sf: Rename few local functions
Jagan Teki
- [U-Boot] [PATCH v6 16/21] spi: Remove dual flash options/flags
Jagan Teki
- [U-Boot] [PATCH v6 17/21] sf: dataflash: Remove unneeded spi data
Jagan Teki
- [U-Boot] [PATCH v6 18/21] sf: dataflash: Move flash id detection into jedec_probe
Jagan Teki
- [U-Boot] [PATCH v6 19/21] sf: dataflash: Fix add_dataflash return logic
Jagan Teki
- [U-Boot] [PATCH v6 20/21] sf: dataflash: Minor cleanups
Jagan Teki
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Jagan Teki
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 02/21] sf: Simplify lock ops detection code
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 03/21] sf: sandbox: Use JEDEC_MFR|ID in id exctract
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 04/21] sf: Cleanup spi_flash_info{}
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 05/21] sf: nr_sectors -> n_sectors
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 06/21] sf: Add SPI_FLASH_MAX_ID_LEN
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 07/21] sf: Increase max id length by 1 byte
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 07/21] sf: Increase max id length by 1 byte
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 08/21] sf: Add INFO6 flash_info macro
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 11/12] Xilinx ZynqMP: fix minimum SDHCI frequency
Michal Simek
- [U-Boot] [PATCH v6 09/21] sf: params: Add S25FS256S_64K spi flash support
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 11/12] Xilinx ZynqMP: fix minimum SDHCI frequency
Michal Simek
- [U-Boot] [PATCH v6 10/21] sf: Remove legacy idcode detection code
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 11/21] sf: Remove non-meaningful comments
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 12/21] sf: Rename sf_params.c to spi_flash_ids.c
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 13/21] sf: ids: Use small letter's with flash name
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 14/21] sf: ids: Use small letter in ext_jedec
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 16/21] spi: Remove dual flash options/flags
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v3 0/3] spl: USB Gadget cleanup
B, Ravi
- [U-Boot] [PATCH v2 0/3] spl: USB Gadget cleanup
B, Ravi
- [U-Boot] Fixed clock driver (clk: convert API to match reset/mailbox style)
Michal Simek
- [U-Boot] [PATCH 1/2] ARM: zynq: Remove DTC 1.2 warnings
Michal Simek
- [U-Boot] [GIT PULL] Xilinx changes
Michal Simek
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Alison Wang
- [U-Boot] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] sunxi board: why MMC dev are swapped ?
Mylene Josserand
- [U-Boot] [PATCH 11/12] Xilinx ZynqMP: fix minimum SDHCI frequency
André Przywara
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Michal Simek
- [U-Boot] [PATCH 11/12] Xilinx ZynqMP: fix minimum SDHCI frequency
Michal Simek
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Dongpo Li
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
Wenbin Song
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Michal Simek
- [U-Boot] [PATCHv3 01/15] configs: ls1021a: enable DT and DM support
Zhiqiang Hou
- [U-Boot] [PATCHv3 02/15] dm: pci: return the real controller in pci_bus_to_hose()
Zhiqiang Hou
- [U-Boot] [PATCHv3 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Zhiqiang Hou
- [U-Boot] [PATCHv3 04/15] arm: ls1021a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv3 05/15] arm: ls1012a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv3 06/15] armv8: ls1043a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv3 07/15] armv8: ls1046a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv3 08/15] armv8: ls2080a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Zhiqiang Hou
- [U-Boot] [PATCHv3 10/15] arm: ls1021a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv3 11/15] arm: ls1012a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv3 12/15] armv8: ls1043a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv3 13/15] armv8: ls1046a: Enable PCIe and E1000 in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv3 14/15] armv8: ls2080a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] [PATCHv3 15/15] pci: layerscape: remove unnecessary legacy code
Zhiqiang Hou
- [U-Boot] [PATCH] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Dongpo Li
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Michal Simek
- [U-Boot] [RFC PATCH v2 0/7] "Transient" (= export-restricted) environment vars
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 1/7] env: Allow unconditional access if H_PROGRAMMATIC is set
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 2/7] net: dm: Ignore unknown env_op_* constants
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 3/7] env: Introduce "export" operation and (access flag) restriction
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 5/7] sunxi: env: flag fel_* environment vars as "system"
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 6/7] env: Introduce setenv_transient() helper function
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 7/7] env: Automatically mark dynamic configuration info as "do not export"
Bernhard Nortmann
- [U-Boot] [PATCH] spl: add check for FIT-header when loading image
Tomas Melin
- [U-Boot] [PATCH] splash: fix splash source flags check
Tomas Melin
- [U-Boot] [PATCH] spl: add check for FIT-header when loading image
Lokesh Vutla
- [U-Boot] [PATCH] spl: remove redundant call to parse_image_header()
Tomas Melin
- [U-Boot] [PATCH 0/4] efi_laoder: Add travis test coverage
Alexander Graf
- [U-Boot] [PATCH 1/4] tests: net: Offset downloads to 4MB
Alexander Graf
- [U-Boot] [PATCH 2/4] travis: Add python path for environments
Alexander Graf
- [U-Boot] [PATCH 3/4] tests: Add efi_loader hello world test
Alexander Graf
- [U-Boot] [PATCH 4/4] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [PATCH 07/12] usb: eth: r8152_fw: fix indentation
Marek Vasut
- [U-Boot] [PATCH 09/12] phy: micrel: add missing braces
Marek Vasut
- [U-Boot] [PATCH 12/12] usb: gadget: remove unused shortname variable
Marek Vasut
- [U-Boot] [PATCH 02/12] mtd: cfi_flash: fix indentation
Stefan Roese
- [U-Boot] [PATCH 06/12] marvell: comphy_a3700: fix bitmask
Stefan Roese
- [U-Boot] [PATCH] spl: remove redundant call to parse_image_header()
Lokesh Vutla
- [U-Boot] [PATCH] drivers:dfu:dfu_sf: Fix upload - add partition/altsetting start address
michael.hennerich at analog.com
- [U-Boot] [PATCH 12/12] usb: gadget: remove unused shortname variable
Lukasz Majewski
- [U-Boot] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH 06/12] marvell: comphy_a3700: fix bitmask
Kostya Porotchkin
- [U-Boot] [PATCH v6 08/21] sf: Add INFO6 flash_info macro
Jagan Teki
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Jagan Teki
- [U-Boot] [PATCH v6 06/21] sf: Add SPI_FLASH_MAX_ID_LEN
Jagan Teki
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Jagan Teki
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 06/21] sf: Add SPI_FLASH_MAX_ID_LEN
Siva Durga Prasad Paladugu
- [U-Boot] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH] arm: exynos7420: remove custome low level init function
Thomas Abraham
- [U-Boot] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL
Fabian Vogt
- [U-Boot] [PATCH v3 1/3] spl: add RAM boot device only if it is actually defined
Lukasz Majewski
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Jagan Teki
- [U-Boot] [PATCH v6 16/21] spi: Remove dual flash options/flags
Jagan Teki
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Peter Robinson
- [U-Boot] [PATCH v3 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v3 3/3] spl: add USB Gadget config option
Lukasz Majewski
- [U-Boot] [PATCH] drivers:dfu:dfu_sf: Fix upload - add partition/altsetting start address
Lukasz Majewski
- [U-Boot] [PATCH 0/4] efi_laoder: Add travis test coverage
Alexander Graf
- [U-Boot] [PATCH 1/3] davinci: omapl138_lcdk: use correct AIS config
Fabien Parent
- [U-Boot] [PATCH 2/3] davinci: da850evm: fix empty boot method list in the SPL
Fabien Parent
- [U-Boot] [PATCH 3/3] davinci: omapl138_lcdk: add MMC/SD SPL boot support
Fabien Parent
- [U-Boot] [PATCH] dm: blk: Fix get_desc to return block device descriptor
Michal Simek
- [U-Boot] [PATCH v5 0/7] toradex: config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v5 1/7] Revert "generic-board: allow showing custom board info"
Marcel Ziswiler
- [U-Boot] [PATCH v5 2/7] generic-board: make show_board_info a weak function
Marcel Ziswiler
- [U-Boot] [PATCH v5 3/7] apalis/colibri_t20/t30: deactivate displaying board info
Marcel Ziswiler
- [U-Boot] [PATCH v5 4/7] toradex: config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v5 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v5 6/7] apalis/colibri_t30: move environment location
Marcel Ziswiler
- [U-Boot] [PATCH v5 7/7] colibri_vf: usb gadget: toradex pid is now set generically
Marcel Ziswiler
- [U-Boot] [PATCH] ARM: socfpga: Add boot0 hook to prevent SPL corruption
Marek Vasut
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
york sun
- [U-Boot] [PATCH v6 0/2] spl: Convert MMC raw mode sector options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v6 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v6 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
Sam Protsenko
- [U-Boot] [PATCH v3 00/11] imx6: Add Engicam GEAM6UL/i.CoreM6 RQS board support
Jagan Teki
- [U-Boot] [PATCH v3 01/11] arm: dts: Add devicetree for i.MX6UL
Jagan Teki
- [U-Boot] [PATCH v3 02/11] arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v3 03/11] arm: dts: imx6ul-geam: Add I2C nodes
Jagan Teki
- [U-Boot] [PATCH v3 04/11] imx6: geam6ul: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v3 05/11] dm: net: fec: Add .read_rom_hwaddr
Jagan Teki
- [U-Boot] [PATCH v3 06/11] net: fec: Zap local mac variable
Jagan Teki
- [U-Boot] [PATCH v3 07/11] arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v3 08/11] arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support
Jagan Teki
- [U-Boot] [PATCH v3 09/11] imx6: icorem6: Rename engicam icorem6 defconfig files
Jagan Teki
- [U-Boot] [PATCH v3 10/11] arm: dts: imx6qdl-icore-rqs: Add I2C node's
Jagan Teki
- [U-Boot] [PATCH v3 11/11] imx6: icorem6_rqs: Add I2C support
Jagan Teki
- [U-Boot] [PATCH v5 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v3 10/11] arm: dts: imx6qdl-icore-rqs: Add I2C node's
Fabio Estevam
- [U-Boot] [PATCH v3 10/11] arm: dts: imx6qdl-icore-rqs: Add I2C node's
Jagan Teki
- [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux
york sun
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Jagan Teki
- [U-Boot] [PATCH 01/12] ls2080aqds: eth: add missing braces
york sun
- [U-Boot] [PATCH 02/12] mtd: cfi_flash: fix indentation
york sun
- [U-Boot] [PATCH 04/12] net: ldpaa_eth: add missing braces
york sun
- [U-Boot] 2016.09+fslc was working... But not anymore
Carlos Alberto Musich Cuevas
- [U-Boot] [PATCH] ARM: socfpga: Add boot0 hook to prevent SPL corruption
Dinh Nguyen
- [U-Boot] [PATCH] imx: iomux-v3: provide MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC
Sebastian Andrzej Siewior
- [U-Boot] [PATCH] buildman: Rename do_build to config_only
Simon Glass
- [U-Boot] [PATCH] imx: iomux-v3: provide MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC
Stefan Agner
- [U-Boot] [PATCH 1/4] fsl/ddr: Fix compiling warning
york sun
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
york sun
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
york sun
- [U-Boot] [PATCH v7 0/7] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH v7 1/7] ls2080: Exit dpaa only right before exiting U-Boot
Alexander Graf
- [U-Boot] [PATCH v7 2/7] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Alexander Graf
- [U-Boot] [PATCH v7 3/7] ls2080ardb: Reserve DP-DDR RAM
Alexander Graf
- [U-Boot] [PATCH v7 4/7] armv8: ls2080a: Declare spin tables as reserved for efi loader
Alexander Graf
- [U-Boot] [PATCH v7 5/7] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [PATCH v7 6/7] ls2080ardb: Convert to distro boot
Alexander Graf
- [U-Boot] [PATCH v7 7/7] efi_loader: Fix efi_add_runtime_mmio definition
Alexander Graf
- [U-Boot] [PATCH] ARM: socfpga: Add boot0 hook to prevent SPL corruption
Marek Vasut
- [U-Boot] [PATCH 2/4] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
york sun
- [U-Boot] [PATCH v7 5/7] armv8: fsl-layerscape: Add support for efi_loader RTS reset
york sun
- [U-Boot] [PATCH v8 0/8] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] [PATCH v8 1/8] efi_loader: Disable PSCI reset for ls1043 and ls1046
Alexander Graf
- [U-Boot] [PATCH v8 2/8] efi_loader: Fix efi_add_runtime_mmio definition
Alexander Graf
- [U-Boot] [PATCH v8 3/8] ls2080: Exit dpaa only right before exiting U-Boot
Alexander Graf
- [U-Boot] [PATCH v8 4/8] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Alexander Graf
- [U-Boot] [PATCH v8 5/8] ls2080ardb: Reserve DP-DDR RAM
Alexander Graf
- [U-Boot] [PATCH v8 6/8] armv8: ls2080a: Declare spin tables as reserved for efi loader
Alexander Graf
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [PATCH v8 8/8] ls2080ardb: Convert to distro boot
Alexander Graf
- [U-Boot] [PATCH] tools: imximage: display DCD block offset, length
Eric Nelson
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
york sun
- [U-Boot] [PATCH v5 00/13] binman: A tool for creating firmware images
Simon Glass
- [U-Boot] [PATCH v5 01/13] binman: Introduce binman, a tool for building binary images
Simon Glass
- [U-Boot] [PATCH v5 02/13] binman: Add basic entry types for U-Boot
Simon Glass
- [U-Boot] [PATCH v5 03/13] binman: Add support for building x86 ROMs
Simon Glass
- [U-Boot] [PATCH v5 04/13] binman: Add support for u-boot.img as an input binary
Simon Glass
- [U-Boot] [PATCH v5 05/13] binman: Add support for building x86 ROMs with SPL
Simon Glass
- [U-Boot] [PATCH v5 06/13] binman: Add support for building x86 images with FSP/CMC
Simon Glass
- [U-Boot] [PATCH v5 07/13] binman: Add a build rule for binman
Simon Glass
- [U-Boot] [PATCH v5 08/13] binman: Allow configuration options to be used in .dts files
Simon Glass
- [U-Boot] [PATCH v5 09/13] binman: Automatically include a U-Boot .dtsi file
Simon Glass
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [PATCH v5 11/13] sunxi: Use binman for sunxi boards
Simon Glass
- [U-Boot] [PATCH v5 12/13] x86: Use binman all x86 boards
Simon Glass
- [U-Boot] [PATCH v5 13/13] binman: Drop microcode features from ifdtool
Simon Glass
- [U-Boot] [PATCH v6 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node
Wenbin Song
- [U-Boot] [PATCH] arm: exynos7420: remove custome low level init function
Alison Wang
- [U-Boot] [PATCH v6 21/21] sf: Fix s25fs512s id param table
Vignesh R
- [U-Boot] Adding a mmc protect command
Eugene.Cho at dell.com
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Dongwoo Lee
- [U-Boot] [PATCH] ARM: socfpga: Add boot0 hook to prevent SPL corruption
Chin Liang See
- [U-Boot] [PATCH v6 16/21] spi: Remove dual flash options/flags
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v6 16/21] spi: Remove dual flash options/flags
Jagan Teki
- [U-Boot] [PATCH v7 10/21] sf: Remove spansion_s25fss_disable_4KB_erase
Jagan Teki
- [U-Boot] [PATCH v7 13/21] sf: ids: Use small letter's with flash name
Jagan Teki
- [U-Boot] [PATCH v7 14/21] sf: ids: Use small letter in ext_jedec
Jagan Teki
- [U-Boot] [PATCH v7 21/21] sf: Fix s25fs512s id table
Jagan Teki
- [U-Boot] [PATCH v2] sata: Fixes:d97dc8a0(Separate the non-command code into its own file)
yuantian.tang at nxp.com
- [U-Boot] [PATCH v3 5/5] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [PATCH 0/6][v4] Update LS2080A SoC code to support LS2088A SoC
Priyanka Jain
- [U-Boot] [PATCH 1/6][v4] armv8: lsch3: Add generic get_svr() in assembly
Priyanka Jain
- [U-Boot] [PATCH 2/6][v4] armv8: lsch3: Use SVR based timer base address detection
Priyanka Jain
- [U-Boot] [PATCH 3/6][v4] armv8: fsl-layerscape: Update TZASC registers type
Priyanka Jain
- [U-Boot] [PATCH 4/6][v4] armv8: fsl-layerscape : Check SVR for initializing TZASC
Priyanka Jain
- [U-Boot] [PATCH 5/6][v4] armv8: fsl-layerscape: Add NXP LS2088A SoC support
Priyanka Jain
- [U-Boot] [PATCH 6/6][v4] armv8/fsl-lsch3: Update code to release secondary cores
Priyanka Jain
- [U-Boot] [PATCH] board/ls2088ardb: set rear fan speed to reduce noise
ying.zhang22455 at nxp.com
- [U-Boot] [PATCH v3 0/6] DM conversion of usb ether gadget
Mugunthan V N
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCH v3 2/6] drivers: usb: gadget: ether: access network_started using local variable
Mugunthan V N
- [U-Boot] [PATCH v3 3/6] drivers: usb: gadget: ether: consolidate global devices to single struct
Mugunthan V N
- [U-Boot] [PATCH v3 4/6] drivers: usb: gadget: ether: use net device priv to pass usb ether priv
Mugunthan V N
- [U-Boot] [PATCH v3 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration
Mugunthan V N
- [U-Boot] [PATCH v3 6/6] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH] spl: mmc: fix build without CONFIG_SPL_LIBCOMMON_SUPPORT
Jaehoon Chung
- [U-Boot] [PATCH] sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
Jaehoon Chung
- [U-Boot] [PATCH v3 00/10] driver model bring-up of musb on AM335x GP and BBB
Mugunthan V N
- [U-Boot] [PATCH v3 01/10] configs: am335x: usb: do not define CONFIG_DM_USB for spl
Mugunthan V N
- [U-Boot] [PATCH v3 02/10] am33xx: board: do not register usb devices when CONFIG_DM_USB is defined
Mugunthan V N
- [U-Boot] [PATCH v3 03/10] drivers: usb: musb: add ti musb misc driver for wrapper
Mugunthan V N
- [U-Boot] [PATCH v3 04/10] am33xx: board: probe misc drivers to register musb devices
Mugunthan V N
- [U-Boot] [PATCH v3 05/10] drivers: usb: musb: adopt musb backend driver to driver model
Mugunthan V N
- [U-Boot] [PATCH v3 06/10] drivers: usb: musb: add ti musb host driver with driver model support
Mugunthan V N
- [U-Boot] [PATCH v3 07/10] drivers: usb: musb: add ti musb peripheral driver with driver model support
Mugunthan V N
- [U-Boot] [PATCH v3 08/10] am33xx: board: init usb ether gadget for rndis support
Mugunthan V N
- [U-Boot] [PATCH v3 09/10] am335x_evm: enable usb ether gadget as it supports DM_ETH
Mugunthan V N
- [U-Boot] [PATCH v3 10/10] defconfig: am335x_evm: enable usb driver model
Mugunthan V N
- [U-Boot] [PATCH] board/ls2080rdb, qds: Enable ddr hashing for controller version 5.2.1
Priyanka Jain
- [U-Boot] [U-Boot, v8, 4/8] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Alexander Graf
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
Alexander Graf
- [U-Boot] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH] imx: iomux-v3: provide MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC
Stefano Babic
- [U-Boot] [U-Boot,v8,5/8] ls2080ardb: Reserve DP-DDR RAM
Alexander Graf
- [U-Boot] [U-Boot, v8, 3/8] ls2080: Exit dpaa only right before exiting U-Boot
Alexander Graf
- [U-Boot] [U-Boot, v8, 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [U-Boot, v8, 6/8] armv8: ls2080a: Declare spin tables as reserved for efi loader
Alexander Graf
- [U-Boot] [U-Boot, v8, 2/8] efi_loader: Fix efi_add_runtime_mmio definition
Alexander Graf
- [U-Boot] [U-Boot, v8, 1/8] efi_loader: Disable PSCI reset for ls1043 and ls1046
Alexander Graf
- [U-Boot] [U-Boot, v8, 4/8] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3
Alexander Graf
- [U-Boot] [U-Boot,v8,8/8] ls2080ardb: Convert to distro boot
Alexander Graf
- [U-Boot] [PATCH] tools: imximage: display DCD block offset, length
Gary Bisson
- [U-Boot] Dynamically determine RAM size and pass it to kernel
Mike Looijmans
- [U-Boot] [PATCH v3 0/2] drivers: timer: inroduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v3 1/2] drivers: timer: Introduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v3 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Vlad Zakharov
- [U-Boot] Dynamically determine RAM size and pass it to kernel
Mike Looijmans
- [U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
Emmanuel Vadot
- [U-Boot] [PATCH] api: Use hashtable function for API_env_enum
Emmanuel Vadot
- [U-Boot] [PATCH] tools: imximage: display DCD block offset, length
Eric Nelson
- [U-Boot] 2016.09+fslc was working... But not anymore
Fabio Estevam
- [U-Boot] [PATCH] board/ls2088ardb: set rear fan speed to reduce noise
Fabio Estevam
- [U-Boot] FDT retrived varaibles appear to have different properties fom other u-boot variables - and are corrupted on get, set, get sequence
Tom Rini
- [U-Boot] [PATCH 01/27] Provide a generic io.h & address mapping functions
Paul Burton
- [U-Boot] [PATCH v2 6/7] spi: cadence_qspi: Fix CS timings
Phil Edworthy
- [U-Boot] [PATCH] SPI: add support for the EON EN25Q80B flash chip
Jagan Teki
- [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G
Jagan Teki
- [U-Boot] [PULL 00/24] efi patch queue 2016-11-17
Alexander Graf
- [U-Boot] [PATCH 0/4] config: Add FreeBSD kconfig options
Tom Rini
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support
york sun
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
york sun
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [PATCH] board/ls2080rdb, qds: Enable ddr hashing for controller version 5.2.1
york sun
- [U-Boot] 2016.09+fslc was working... But not anymore
Fabio Estevam
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
york sun
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
york sun
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Yann E. MORIN
- [U-Boot] [PATCH] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] [PATCH] spl: mmc: fix build without CONFIG_SPL_LIBCOMMON_SUPPORT
Yann E. MORIN
- [U-Boot] [PATCH v8 7/8] armv8: fsl-layerscape: Add support for efi_loader RTS reset
Alexander Graf
- [U-Boot] [PATCH 0/8] spl: Move image loader names into the linker list
Simon Glass
- [U-Boot] [PATCH 1/8] spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macro
Simon Glass
- [U-Boot] [PATCH 2/8] spl: Add a name to the SPL load-image methods
Simon Glass
- [U-Boot] [PATCH 3/8] spl: Move the loading code into its own function
Simon Glass
- [U-Boot] [PATCH 4/8] spl: Pass the loader into spl_load_image()
Simon Glass
- [U-Boot] [PATCH 5/8] spl: Drop announce_boot_device()
Simon Glass
- [U-Boot] [PATCH 6/8] spl: sunxi: Drop spl_board_announce_boot_device()
Simon Glass
- [U-Boot] [PATCH 7/8] spl: uniphier: Drop spl_board_announce_boot_device()
Simon Glass
- [U-Boot] [PATCH 8/8] spl: sandbox: Drop spl_board_announce_boot_device()
Simon Glass
- [U-Boot] [PATCH v2 0/6] efi_laoder: Add travis test coverage
Alexander Graf
- [U-Boot] [PATCH v2 1/6] tests: net: Offset downloads to 4MB
Alexander Graf
- [U-Boot] [PATCH v2 2/6] Travis: Expose build dir as variable
Alexander Graf
- [U-Boot] [PATCH v2 3/6] travis: Add python path for environments
Alexander Graf
- [U-Boot] [PATCH v2 4/6] tests: Add efi_loader hello world test
Alexander Graf
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [PATCH v2 6/6] Travis: Remove sleep test from integratorcp_cm926ejs-qemu test
Alexander Graf
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Stephen Warren
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Simon Glass
- [U-Boot] [PATCH 10/12] cmd: tpm_test: fix indentation
Simon Glass
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Hans de Goede
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Simon Glass
- [U-Boot] [PATCH v3 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Tom Rini
- [U-Boot] [GIT PULL] Xilinx changes
Tom Rini
- [U-Boot] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [PULL 00/24] efi patch queue 2016-11-17
Tom Rini
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode
Tom Rini
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Remove FIT Support
Tom Rini
- [U-Boot] [PATCH] ARM: OMAP3_LOGIC: Update MTD Partition Table
Tom Rini
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Maxime Ripard
- [U-Boot] [PATCH] splash: fix splash source flags check
Tom Rini
- [U-Boot] [PATCH 1/3] davinci: omapl138_lcdk: use correct AIS config
Tom Rini
- [U-Boot] [PATCH 2/3] davinci: da850evm: fix empty boot method list in the SPL
Tom Rini
- [U-Boot] [PATCH 3/3] davinci: omapl138_lcdk: add MMC/SD SPL boot support
Tom Rini
- [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH] sunxi: add support for Nintendo NES Classic Edition
FUKAUMI Naoki
- [U-Boot] [PATCH 1/3] davinci: omapl138_lcdk: use correct AIS config
Peter Howard
- [U-Boot] [PATCH 1/2] Add-MSCC-Phys-VSC8530-VSC8531-VSC8540-VSC8541
John Haechten
- [U-Boot] [PATCH 2/2] Fix patman alignment issues in Add MSCC PHY:VSC8530/VSC8531/VSC8540/VSC8541
John Haechten
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Simon Glass
- [U-Boot] [PATCH 1/3] dts: rk3288: correct sdram setting for miniarm
Simon Glass
- [U-Boot] [PATCH 2/3] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Simon Glass
- [U-Boot] [PATCH 3/3] rockchip: configs: make rk3036 env config same with rk3288
Simon Glass
- [U-Boot] [PATCH 3/3] board: popmetal: enable the usb host port power in board init
Simon Glass
- [U-Boot] [PATCH] rockchip: configs: correct partitions 'boot' size
Simon Glass
- [U-Boot] [PATCH 12/15] pci: mvebu: Add PCIe driver for Armada-8K
Simon Glass
- [U-Boot] New UCLASS_PINCTRL driver - probe is not called for all nodes
Simon Glass
- [U-Boot] [PATCH v3 1/3] spl: add RAM boot device only if it is actually defined
Simon Glass
- [U-Boot] Fixed clock driver (clk: convert API to match reset/mailbox style)
Simon Glass
- [U-Boot] [PATCHv3 02/15] dm: pci: return the real controller in pci_bus_to_hose()
Simon Glass
- [U-Boot] [PATCHv3 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Simon Glass
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] [PATCHv3 15/15] pci: layerscape: remove unnecessary legacy code
Simon Glass
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Simon Glass
- [U-Boot] [PATCH] spl: add check for FIT-header when loading image
Simon Glass
- [U-Boot] [PATCH] spl: remove redundant call to parse_image_header()
Simon Glass
- [U-Boot] [PATCH] dm: blk: Fix get_desc to return block device descriptor
Simon Glass
- [U-Boot] [PATCH v3 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
André Przywara
- [U-Boot] [PATCH 2/4 v2] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH] qts-filter.sh: strip DOS line endings and handle continuation lines
Bill Randle
- [U-Boot] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH resend v3 0/6] DM conversion of usb ether gadget
Mugunthan V N
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCH resend v3 2/6] drivers: usb: gadget: ether: access network_started using local variable
Mugunthan V N
- [U-Boot] [PATCH v7 04/21] sf: Cleanup spi_flash_info{}
Jagan Teki
- [U-Boot] [PATCH resend v3 3/6] drivers: usb: gadget: ether: consolidate global devices to single struct
Mugunthan V N
- [U-Boot] [PATCH resend v3 4/6] drivers: usb: gadget: ether: use net device priv to pass usb ether priv
Mugunthan V N
- [U-Boot] [PATCH resend v3 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration
Mugunthan V N
- [U-Boot] [PATCH resend v3 6/6] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH v3 0/6] DM conversion of usb ether gadget
Mugunthan V N
- [U-Boot] [PATCH] board/ls2080rdb, qds: Enable ddr hashing for controller version 5.2.1
Priyanka Jain
- [U-Boot] [PATCH v6 01/21] sf: Adopt flash table INFO macro from Linux
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Jaehoon Chung
- [U-Boot] [PATCH v2 1/3] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Jacob Chen
- [U-Boot] [PATCH v2 2/3] rockchip: configs: make rk3036 env config same as rk3288
Jacob Chen
- [U-Boot] [PATCH v2 3/3] rockchip: configs: correct partitions 'boot' size
Jacob Chen
- [U-Boot] [PATCH v2 1/2] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Jacob Chen
- [U-Boot] [PATCH v2 2/2] rockchip: configs: make rk3036 env config same as rk3288
Jacob Chen
- [U-Boot] [PATCH] travis: Add efi_loader grub2 test
Alexander Graf
- [U-Boot] [PATCH] tools/env: fix environment alignment tests for block devices
Max Krummenacher
- [U-Boot] [PATCH] imx: iomux-v3: provide MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC
Sebastian Andrzej Siewior
- [U-Boot] [PATCH v6 00/21] sf: Updates on flash detection
Jagan Teki
- [U-Boot] [PATCH v7 10/21] sf: Remove spansion_s25fss_disable_4KB_erase
Jagan Teki
- [U-Boot] [PATCH v7 13/21] sf: ids: Use small letter's with flash name
Jagan Teki
- [U-Boot] [PATCH v7 14/21] sf: ids: Use small letter in ext_jedec
Jagan Teki
- [U-Boot] [PATCH v7 21/21] sf: Fix s25fs512s id table
Jagan Teki
- [U-Boot] [PATCH v7 04/21] sf: Cleanup spi_flash_info{}
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Alexander Graf
- [U-Boot] Dynamically determine RAM size and pass it to kernel
Michal Simek
- [U-Boot] Fixed clock driver (clk: convert API to match reset/mailbox style)
Michal Simek
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Jagan Teki
- [U-Boot] [PATCH] tools/env: fix environment alignment tests for block devices
Andreas Fenkart
- [U-Boot] [PATCH] linux/compat.h: Properly implement ndelay fallback
Mario Six
- [U-Boot] devicetree handling with chanloaded bootloader Was: [PATCH] travis: Add efi_loader grub2 test
Michal Suchanek
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Marek Vasut
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Andre Przywara
- [U-Boot] [RFC PATCH 1/5] scsi: Extract block device initialization
Michal Simek
- [U-Boot] [RFC PATCH 2/5] scsi: Extract device detection algorithm
Michal Simek
- [U-Boot] [RFC PATCH 3/5] scsi: Take lun from device block description
Michal Simek
- [U-Boot] [RFC PATCH 4/5] scsi: Move pccb buffer initalization directly to scsi_detect_dev
Michal Simek
- [U-Boot] [RFC PATCH 5/5] scsi: Simplify scsi_read/scsi_write()
Michal Simek
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Jagan Teki
- [U-Boot] devicetree handling with chanloaded bootloader Was: [PATCH] travis: Add efi_loader grub2 test
Alexander Graf
- [U-Boot] [PATCH] sata: sata_mv: Fix misaligned cache warnings
Stefan Roese
- [U-Boot] [PATCH] bootcounter_ram: Fix misaligned cache warning
Stefan Roese
- [U-Boot] [PATCH] qts-filter.sh: strip DOS line endings and handle continuation lines
Marek Vasut
- [U-Boot] [PATCH] qts-filter.sh: strip DOS line endings and handle continuation lines
Bill Randle
- [U-Boot] [PATCH] board/ls2080rdb, qds: Enable ddr hashing for controller version 5.2.1
york sun
- [U-Boot] [PATCH 2/4 v2] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
york sun
- [U-Boot] [PATCH] board: ge: bx50v3: add the PMIC configuration support
Akshay Bhat
- [U-Boot] [PATCH v2 1/2] keystone2: Move target selection to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH v2 2/2] ti_armv7_keystone2: env: Add NFS loading support for PMMC and MON
Andrew F. Davis
- [U-Boot] [PATCH v2 1/2] keystone2: Move target selection to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02G
dumitru.bacrau at intel.com
- [U-Boot] Stepping down as sunxi u-boot custodian (for real this time)
Hans de Goede
- [U-Boot] [PATCH v2] sata: Fixes:d97dc8a0(Separate the non-command code into its own file)
Simon Glass
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Simon Glass
- [U-Boot] [PATCH] ARM: socfpga: Add boot0 hook to prevent SPL corruption
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v7 16/21] spi: Remove dual flash options/flags
Jagan Teki
- [U-Boot] [PATCHv2] qts-filter.sh: strip DOS line endings and handle continuation lines
Bill Randle
- [U-Boot] [PATCH] sunxi: add support for Nintendo NES Classic Edition
Jagan Teki
- [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02G
Jagan Teki
- [U-Boot] [PATCH] tools/Makefile: suppress "which swig" error output
Andre Przywara
- [U-Boot] [PATCHv2] qts-filter.sh: strip DOS line endings and handle continuation lines
Marek Vasut
- [U-Boot] [PATCH] tools/env: fix environment alignment tests for block devices
Max Krummenacher
- [U-Boot] [PATCH v2] tools/env: fix environment alignment tests for block devices
Max Krummenacher
- [U-Boot] [RFC PATCH v2 1/7] env: Allow unconditional access if H_PROGRAMMATIC is set
Simon Glass
- [U-Boot] [RFC PATCH v2 3/7] env: Introduce "export" operation and (access flag) restriction
Simon Glass
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Simon Glass
- [U-Boot] [RFC PATCH v2 6/7] env: Introduce setenv_transient() helper function
Simon Glass
- [U-Boot] [RFC PATCH v2 7/7] env: Automatically mark dynamic configuration info as "do not export"
Simon Glass
- [U-Boot] [PATCH 01/27] Provide a generic io.h & address mapping functions
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH] timer: Support clocks via phandle
Simon Glass
- [U-Boot] [PATCH v2 1/6] tests: net: Offset downloads to 4MB
Simon Glass
- [U-Boot] [PATCH v2 4/6] tests: Add efi_loader hello world test
Simon Glass
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Simon Glass
- [U-Boot] [PATCH v3 1/3] spl: add RAM boot device only if it is actually defined
Simon Glass
- [U-Boot] [PATCH v2 1/3] rockchip: configs: correct env offset when enable CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
Simon Glass
- [U-Boot] [PATCH v2 2/3] rockchip: configs: make rk3036 env config same as rk3288
Simon Glass
- [U-Boot] [RFC PATCH 1/5] scsi: Extract block device initialization
Simon Glass
- [U-Boot] [RFC PATCH 2/5] scsi: Extract device detection algorithm
Simon Glass
- [U-Boot] [RFC PATCH 3/5] scsi: Take lun from device block description
Simon Glass
- [U-Boot] [RFC PATCH 4/5] scsi: Move pccb buffer initalization directly to scsi_detect_dev
Simon Glass
- [U-Boot] [RFC PATCH 5/5] scsi: Simplify scsi_read/scsi_write()
Simon Glass
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
Simon Glass
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Fabio Estevam
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
André Przywara
- [U-Boot] [PATCH v2] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] Fw: FDT retrived varaibles appear to have different properties fom other u-boot variables - and are corrupted on get, set, get sequence
dh at synoia.com
- [U-Boot] [RFC PATCH 08/10] SPL: read and store arch property from U-Boot image
Simon Glass
- [U-Boot] [PATCH] dm: blk: Fix get_desc to return block device descriptor
Simon Glass
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v2 00/63] x86: Add initial support for 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH v2 01/63] console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL
Simon Glass
- [U-Boot] [PATCH v2 02/63] spl: spi: Add a debug message if loading fails
Simon Glass
- [U-Boot] [PATCH v2 03/63] spl: Makefile: Define SPL_ earlier
Simon Glass
- [U-Boot] [PATCH v2 04/63] spl: Allow CPU drivers to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 05/63] spl: Allow PCI drivers to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 06/63] spl: Allow RTC drivers to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 07/63] spl: Allow timer drivers to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 08/63] spl: Allow PCH drivers to be used in SPL
Simon Glass
- [U-Boot] [PATCH v2 09/63] spl: Don't create a BSS padding when it is separate
Simon Glass
- [U-Boot] [PATCH v2 10/63] x86: Use unsigned long for address in table generation
Simon Glass
- [U-Boot] [PATCH v2 11/63] WIP: x86: Update mpspec to build on 64-bit machines
Simon Glass
- [U-Boot] [PATCH v2 12/63] x86: Add basic support for U-Boot as a 64-bit EFI application
Simon Glass
- [U-Boot] [PATCH v2 13/63] x86: ivybridge: Declare global data where it is used
Simon Glass
- [U-Boot] [PATCH v2 14/63] x86: ivybridge: Add more debugging for failures
Simon Glass
- [U-Boot] [PATCH v2 15/63] x86: ivybridge: Fix types for 64-bit compilation
Simon Glass
- [U-Boot] [PATCH v2 16/63] x86: dts: Mark serial as needed before relocation
Simon Glass
- [U-Boot] [PATCH v2 17/63] x86: fsp: Fix cast for 64-bit compilation
Simon Glass
- [U-Boot] [PATCH v2 18/63] x86: lib: Fix types and casts for 64-bit compilation
Simon Glass
- [U-Boot] [PATCH v2 19/63] x86: Add Kconfig options to build 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH v2 20/63] x86: Kconfig: Add location options for 16/32-bit init
Simon Glass
- [U-Boot] [PATCH v2 21/63] x86: Use X86_16BIT_INIT instead of X86_RESET_VECTOR
Simon Glass
- [U-Boot] [PATCH v2 22/63] x86: Use X86_32BIT_INIT instead of X86_RESET_VECTOR
Simon Glass
- [U-Boot] [PATCH v2 23/63] x86: ivybridge: Allow 32-bit init to move to SPL
Simon Glass
- [U-Boot] [PATCH v2 24/63] x86: Add 64-bit start-up code
Simon Glass
- [U-Boot] [PATCH v2 25/63] x86: board_f: Update init sequence for 64-bit startup
Simon Glass
- [U-Boot] [PATCH v2 26/63] x86: board_r: Set the global data pointer after relocation
Simon Glass
- [U-Boot] [PATCH v2 27/63] x86: Do relocation before clearing BSS
Simon Glass
- [U-Boot] [PATCH v2 28/63] x86: Refactor relocation to prepare for 64-bit
Simon Glass
- [U-Boot] [PATCH v2 29/63] x86: Add support for 64-bit relocation
Simon Glass
- [U-Boot] [PATCH v2 30/63] x86: Tidy up use of size_t in relocation
Simon Glass
- [U-Boot] [PATCH v2 31/63] x86: Add an SPL implementation
Simon Glass
- [U-Boot] [PATCH v2 32/63] x86: Move the i386 code into its own directory
Simon Glass
- [U-Boot] [PATCH v2 33/63] x86: Add cpu code for x86_64
Simon Glass
- [U-Boot] [PATCH v2 34/63] x86: Support global_data on x86_64
Simon Glass
- [U-Boot] [PATCH v2 35/63] x86: Fix up CONFIG_X86_64 check
Simon Glass
- [U-Boot] [PATCH v2 36/63] x86: Add a link script for 64-bit x86
Simon Glass
- [U-Boot] [PATCH v2 37/63] x86: Add a link script for SPL
Simon Glass
- [U-Boot] [PATCH v2 38/63] x86: Add SPL build rules for start-up code
Simon Glass
- [U-Boot] [PATCH v2 39/63] x86: Fix up byteorder.h for x86_64
Simon Glass
- [U-Boot] [PATCH v2 40/63] x86: Drop flag_is_changable() on x86_64
Simon Glass
- [U-Boot] [PATCH v2 41/63] x86: Fix up type sizes for 64-bit
Simon Glass
- [U-Boot] [PATCH v2 42/63] x86: Mention the MRC region in the README
Simon Glass
- [U-Boot] [PATCH v2 43/63] x86: ivybridge: Skipt SATA init in SPL
Simon Glass
- [U-Boot] [PATCH v2 44/63] x86: ivybridge: Provide a dummy SDRAM init for 64-bit
Simon Glass
- [U-Boot] [PATCH v2 45/63] x86: Don't try to run the VGA BIOS in 64-bit mode
Simon Glass
- [U-Boot] [PATCH v2 46/63] x86: Don't build call64 and setjmp on 64-bit
Simon Glass
- [U-Boot] [PATCH v2 47/63] x86: Don't build cpu files which are not supported on 64-bit
Simon Glass
- [U-Boot] [PATCH v2 48/63] x86: Don't build 32-bit efi files on x86_64
Simon Glass
- [U-Boot] [PATCH v2 49/63] x86: Don't try to boot Linux from SPL
Simon Glass
- [U-Boot] [PATCH v2 50/63] x86: Drop interrupt support in 64-bit mode
Simon Glass
- [U-Boot] [PATCH v2 51/63] x86: Support jumping from SPL to U-Boot
Simon Glass
- [U-Boot] [PATCH v2 52/63] x86: Move pirq_routing_table to global_data
Simon Glass
- [U-Boot] [PATCH v2 53/63] x86: Move turbo_state to global_data
Simon Glass
- [U-Boot] [PATCH v2 54/63] x86: Change irq_already_routed to a local variable
Simon Glass
- [U-Boot] [PATCH v2 55/63] x86: Move call64 to the i386 directory
Simon Glass
- [U-Boot] [PATCH v2 56/63] x86: Move setjmp to the i386 directory
Simon Glass
- [U-Boot] [PATCH v2 57/63] x86: Add a dummy setjmp implementation for x86_64
Simon Glass
- [U-Boot] [PATCH v2 58/63] x86: link: Add a text base for 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH v2 59/63] x86: link: Add SPL declarations to the binman image
Simon Glass
- [U-Boot] [PATCH v2 60/63] x86: link: Set up device tree for SPL
Simon Glass
- [U-Boot] [PATCH v2 61/63] x86: link: Add build options for SPL
Simon Glass
- [U-Boot] [PATCH v2 62/63] x86: Update compile/link flags to support 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH v2 63/63] x86: link: Add a config for 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Fabio Estevam
- [U-Boot] [PATCH] socfpga_xxx.h: update socfpga configs to match mmc spl parition change
Bill Randle
- [U-Boot] [PATCH] socfpga_xxx.h: update socfpga configs to match mmc spl parition change
Marek Vasut
- [U-Boot] [PATCH] socfpga_xxx.h: update socfpga configs to match mmc spl parition change
Bill Randle
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Simon Glass
- [U-Boot] [PATCH] tools/Makefile: suppress "which swig" error output
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] New UCLASS_PINCTRL driver - probe is not called for all nodes
Konstantin Porotchkin
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v7 16/21] spi: Remove dual flash options/flags
Jagan Teki
- [U-Boot] [PATCH 00/24] sunxi: Allwinner A64: SPL support
Andre Przywara
- [U-Boot] [PATCH 01/24] drivers: SPI: sunxi SPL: fix warning
Andre Przywara
- [U-Boot] [PATCH 02/24] sun6i: Restrict some register initialization to Allwinner A31 SoC
Andre Przywara
- [U-Boot] [PATCH 03/24] armv8: prevent using THUMB
Andre Przywara
- [U-Boot] [PATCH 04/24] armv8: add lowlevel_init.S
Andre Przywara
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Andre Przywara
- [U-Boot] [PATCH 06/24] move UL() macro from armv8/mmu.h into common.h
Andre Przywara
- [U-Boot] [PATCH 07/24] SPL: make struct spl_image 64-bit safe
Andre Przywara
- [U-Boot] [PATCH 08/24] armv8: add simple sdelay implementation
Andre Przywara
- [U-Boot] [PATCH 09/24] armv8: move reset branch into boot hook
Andre Przywara
- [U-Boot] [PATCH 10/24] ARM: boot0 hook: remove macro, include whole header file
Andre Przywara
- [U-Boot] [PATCH 11/24] sunxi: introduce extra config option for boot0 header
Andre Przywara
- [U-Boot] [PATCH 12/24] sunxi: A64: do an RMR switch if started in AArch32 mode
Andre Przywara
- [U-Boot] [PATCH 13/24] sunxi: provide default DRAM config for sun50i in Kconfig
Andre Przywara
- [U-Boot] [PATCH 14/24] sunxi: H3: add and rename some DRAM contoller registers
Andre Przywara
- [U-Boot] [PATCH 15/24] sunxi: H3: add DRAM controller single bit delay support
Andre Przywara
- [U-Boot] [PATCH 16/24] sunxi: A64: use H3 DRAM initialization code for A64
Andre Przywara
- [U-Boot] [PATCH 17/24] sunxi: H3/A64: fix non-ODT setting
Andre Przywara
- [U-Boot] [PATCH 18/24] sunxi: DRAM: fix H3 DRAM size display on aarch64
Andre Przywara
- [U-Boot] [PATCH 19/24] sunxi: A64: enable SPL
Andre Przywara
- [U-Boot] [PATCH 20/24] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [PATCH 21/24] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [PATCH 22/24] ARM: SPL/FIT: differentiate between arm and arm64 arch properties
Andre Przywara
- [U-Boot] [PATCH 23/24] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [PATCH 24/24] sunxi: A64: add 32-bit SPL support
Andre Przywara
- [U-Boot] [PATCH 0/6] arm64: mvebu: Armada-8K family patches
kostap at marvell.com
- [U-Boot] [PATCH 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
kostap at marvell.com
- [U-Boot] [PATCH 2/6] arm64: mvebu: Add bubt command for flash image burn
kostap at marvell.com
- [U-Boot] [PATCH 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
kostap at marvell.com
- [U-Boot] [PATCH 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
kostap at marvell.com
- [U-Boot] [PATCH 5/6] arm64: mvebu: Enable BUBT command support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH 6/6] arm64: mvebu: Enable pin control support in A8K default config
kostap at marvell.com
- [U-Boot] [PATCH] sata: fix sata command can not being executed bug
yuantian.tang at nxp.com
- [U-Boot] [PATCH v2] sata: Fixes:d97dc8a0(Separate the non-command code into its own file)
Y.T. Tang
- [U-Boot] [PATCH 1/4 v2] fsl/ddr: Fix compiling warning
Shengzhou Liu
- [U-Boot] [PATCH 2/4 v3] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
Shengzhou Liu
- [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string
Vignesh R
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCHv3 03/15] dm: pci: remove pci_bus_to_hose(0) calling
Z.Q. Hou
- [U-Boot] [PATCHv3 02/15] dm: pci: return the real controller in pci_bus_to_hose()
Z.Q. Hou
- [U-Boot] [PATCH 11/24] sunxi: introduce extra config option for boot0 header
Maxime Ripard
- [U-Boot] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH] xyz-modem: Change getc timeout loop waiting
Tomas Melin
- [U-Boot] [PATCH] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Mike Looijmans
- [U-Boot] [PATCH v2] board/ls2088ardb: set rear fan speed to reduce noise
ying.zhang22455 at nxp.com
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Michal Simek
- [U-Boot] [PATCH 11/24] sunxi: introduce extra config option for boot0 header
Andre Przywara
- [U-Boot] [PATCH 01/24] drivers: SPI: sunxi SPL: fix warning
Jagan Teki
- [U-Boot] [PATCH] sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Jagan Teki
- [U-Boot] [PATCH] sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Hans de Goede
- [U-Boot] [PATCH] sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Jagan Teki
- [U-Boot] Multiprocessor system and u-boot
Leon Pollak
- [U-Boot] [RFC PATCH 2/5] scsi: Extract device detection algorithm
Michal Simek
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Mike Looijmans
- [U-Boot] [PATCH v2 1/6] tests: net: Offset downloads to 4MB
Tom Rini
- [U-Boot] [PATCH v2 2/6] Travis: Expose build dir as variable
Tom Rini
- [U-Boot] [PATCH v2 3/6] travis: Add python path for environments
Tom Rini
- [U-Boot] [PATCH v2 4/6] tests: Add efi_loader hello world test
Tom Rini
- [U-Boot] [PATCH v3 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Tom Rini
- [U-Boot] [PATCH v2 6/6] Travis: Remove sleep test from integratorcp_cm926ejs-qemu test
Tom Rini
- [U-Boot] [PATCH] bootcounter_ram: Fix misaligned cache warning
Tom Rini
- [U-Boot] [U-Boot, v6, 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v6, 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
Tom Rini
- [U-Boot] [PATCH v3 10/10] defconfig: am335x_evm: enable usb driver model
Tom Rini
- [U-Boot] [PATCH v2 0/2] drivers: timer: inroduce ARC timer driver
Alexey Brodkin
- [U-Boot] [PATCH v2 0/2] drivers: timer: inroduce ARC timer driver
Alexey Brodkin
- [U-Boot] [PATCH v2 0/2] drivers: timer: inroduce ARC timer driver
Tom Rini
- [U-Boot] [PATCH v2 0/2] drivers: timer: inroduce ARC timer driver
Alexey Brodkin
- [U-Boot] [PATCH v2] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] [PATCH 11/24] sunxi: introduce extra config option for boot0 header
Maxime Ripard
- [U-Boot] [PATCH v2] timer: Support clocks via phandle
Tom Rini
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Minkyu Kang
- [U-Boot] [PATCH 0/3] mmc: sdhci: Add support for frequency constrained peripheral interfaces
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 1/3] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 2/3] mmc: zynq: Determine base clock frequency via clock framework
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 3/3] mmc: zynq: Add fdt max-frequency support
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 01/24] drivers: SPI: sunxi SPL: fix warning
Alexander Graf
- [U-Boot] [PATCH 03/24] armv8: prevent using THUMB
Alexander Graf
- [U-Boot] [PATCH] README: fix typo FAT_ENV_DEV_AND_PART
Nicolae Rosia
- [U-Boot] [PATCH 04/24] armv8: add lowlevel_init.S
Alexander Graf
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Alexander Graf
- [U-Boot] [PATCH 06/24] move UL() macro from armv8/mmu.h into common.h
Alexander Graf
- [U-Boot] [PATCH 07/24] SPL: make struct spl_image 64-bit safe
Alexander Graf
- [U-Boot] [PATCH 04/24] armv8: add lowlevel_init.S
Andre Przywara
- [U-Boot] [PATCH v2] timer: Support clocks via phandle
Vlad Zakharov
- [U-Boot] [PATCH 08/24] armv8: add simple sdelay implementation
Alexander Graf
- [U-Boot] [PATCH 04/24] armv8: add lowlevel_init.S
Alexander Graf
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Andre Przywara
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Alexander Graf
- [U-Boot] [PATCH 07/24] SPL: make struct spl_image 64-bit safe
york sun
- [U-Boot] [PATCH 12/24] sunxi: A64: do an RMR switch if started in AArch32 mode
Alexander Graf
- [U-Boot] [PATCH 18/24] sunxi: DRAM: fix H3 DRAM size display on aarch64
Alexander Graf
- [U-Boot] [PATCH 12/24] sunxi: A64: do an RMR switch if started in AArch32 mode
Andre Przywara
- [U-Boot] [PATCH 19/24] sunxi: A64: enable SPL
Alexander Graf
- [U-Boot] [PATCH 19/24] sunxi: A64: enable SPL
Andre Przywara
- [U-Boot] [PATCH] MAINTAINERS: SUNXI: Update maintainership
Jagan Teki
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string
Jagan Teki
- [U-Boot] [PATCH 02/24] sun6i: Restrict some register initialization to Allwinner A31 SoC
Jagan Teki
- [U-Boot] [PATCH v2 02/63] spl: spi: Add a debug message if loading fails
Jagan Teki
- [U-Boot] [PATCH v4 0/3] spl: USB Gadget cleanup
Stefan Agner
- [U-Boot] [PATCH v4 1/3] spl: add RAM boot device only if it is actually defined
Stefan Agner
- [U-Boot] [PATCH v4 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Stefan Agner
- [U-Boot] [PATCH v4 3/3] spl: add USB Gadget config option
Stefan Agner
- [U-Boot] [ANN] U-Boot v2016.11 is released
Jagan Teki
- [U-Boot] [PATCH v2 3/3] arm: dra7xx: Unify Android partition table
Sam Protsenko
- [U-Boot] [PATCH] MAINTAINERS: SUNXI: Update maintainership
Maxime Ripard
- [U-Boot] [PATCH v2 4/4] configs: am57xx: Enable fastboot
Sam Protsenko
- [U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] [PATCH 0/3] Add FIT loadable custom processing
Andrew F. Davis
- [U-Boot] [PATCH 1/3] image: Add FIT image loadable section custom processing
Andrew F. Davis
- [U-Boot] [PATCH 2/3] image: Add Trusted Execution Environment image type
Andrew F. Davis
- [U-Boot] [PATCH 3/3] RFC: board: ti: dra7xx: add FIT image TEE processing
Andrew F. Davis
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH] common: image: Remove FIT header update from image post-processing
Andrew F. Davis
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] U-Boot x86 QEMU: Error on boot
Eric Neblock
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Stephen Warren
- [U-Boot] devicetree handling with chanloaded bootloader Was: [PATCH] travis: Add efi_loader grub2 test
Stephen Warren
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Tom Rini
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Alexander Graf
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Alexander Graf
- [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02G
dumitru.bacrau at intel.com
- [U-Boot] [PATCH] am57xx: Remove unused variable warnings
Tom Rini
- [U-Boot] [U-Boot, 2/3] ARM: AMx3xx: Centralize early clock initialization
Tom Rini
- [U-Boot] [U-Boot, 1/3] ARM: AMx3xx: Allow arch specific code to use early DM
Tom Rini
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Dongwoo Lee
- [U-Boot] [U-Boot, 3/3] board: ti: amx3xx: Remove multiple EEPROM reads
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] fastboot: Add CONFIG_FASTBOOT_USB_DEV option
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] ti_omap5_common: Respect USB controller number in fastboot
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] configs: am57xx: Enable download gadget
Tom Rini
- [U-Boot] [U-Boot,v2,4/4] configs: am57xx: Enable fastboot
Tom Rini
- [U-Boot] omap3_beagle: use config_distro_bootcmd
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] arm: am57xx: Define Android partition table
Tom Rini
- [U-Boot] [U-Boot,v2,2/3] arm: am57xx: Enable 8-bit eMMC access
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] arm: dra7xx: Unify Android partition table
Tom Rini
- [U-Boot] [U-Boot,v3] gpio: dwapb: Add support for port B
Tom Rini
- [U-Boot] [U-Boot, 1/3] test/py: expose config and log as session scoped fixture
Tom Rini
- [U-Boot] ext4: Fix handling of sparse files
Tom Rini
- [U-Boot] [U-Boot,2/2] fs-test.sh: Update expected results
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] ext4: Allow reading files with non-zero offset, clamp read len
Tom Rini
- [U-Boot] [U-Boot,1/3] arm: Introduce ARCH_OMAP2
Tom Rini
- [U-Boot] [U-Boot, 2/3] arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms
Tom Rini
- [U-Boot] [U-Boot, 3/3] TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2
Tom Rini
- [U-Boot] [U-Boot,1/4] rsa: cosmetic: rename pad_len to key_len
Tom Rini
- [U-Boot] [U-Boot,2/4] rsa: Verify RSA padding programatically
Tom Rini
- [U-Boot] [U-Boot, 4/4] image: Combine image_sig_algo with image_sign_info
Tom Rini
- [U-Boot] [U-Boot, 3/4] image: Add crypto_algo struct for RSA info
Tom Rini
- [U-Boot] [U-Boot,v4,1/2] arm: add save_boot_params for ARM1176
Tom Rini
- [U-Boot] [U-Boot, v4, 2/2] rpi: passthrough of the firmware provided FDT blob
Tom Rini
- [U-Boot] ARM: OMAP3_LOGIC: Fix SPL Memory Map for Falcon Mode
Tom Rini
- [U-Boot] ARM: OMAP3_LOGIC: Remove FIT Support
Tom Rini
- [U-Boot] ARM: OMAP3_LOGIC: Update MTD Partition Table
Tom Rini
- [U-Boot] fastboot: simplify the Kconfig logic
Tom Rini
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alison Wang
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Alison Wang
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Jaehoon Chung
- [U-Boot] [PATCH 0/3] ARM: DRA7: Add Kconfig support for selecting OPPs
Lokesh Vutla
- [U-Boot] [PATCH 1/3] ARM: OMAP4+: Add support for dynamically selecting OPPs
Lokesh Vutla
- [U-Boot] [PATCH 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Lokesh Vutla
- [U-Boot] [PATCH 3/3] ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP
Lokesh Vutla
- [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02G
Jagan Teki
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
Minkyu Kang
- [U-Boot] [PATCH 3/8] spl: Move the loading code into its own function
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string
Vignesh R
- [U-Boot] [RFC PATCH 0/7] FPGA changes
Chris Packham
- [U-Boot] [RFC PATCH 1/7] fpga: CONFIG_SYS_FPGA_PROG_FEEDBACK -> CONFIG_FPGA_PROG_FEEDBACK
Chris Packham
- [U-Boot] [RFC PATCH 2/7] fpga: add Kconfig support for Xilinx Spartan devices
Chris Packham
- [U-Boot] [RFC PATCH 3/7] Move CONFIG_FPGA_SPARTAN options to defconfig
Chris Packham
- [U-Boot] [RFC PATCH 4/7] fpga/spartan3: make output quieter
Chris Packham
- [U-Boot] [RFC PATCH 5/7] fpga: add Kconfig for CONFIG_FPGA_PROG_FEEDBACK
Chris Packham
- [U-Boot] [RFC PATCH 6/7] Move FPGA_PROG_FEEDBACK to defconfig
Chris Packham
- [U-Boot] [RFC PATCH 7/7] fpga/spartan3: add reverse bitstream mode
Chris Packham
- [U-Boot] [PATCH] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
Vignesh R
- [U-Boot] [PATCH] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
Lokesh Vutla
- [U-Boot] [ANN] U-Boot v2016.11 is released
Wolfgang Denk
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Michal Simek
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCHv3 15/15] pci: layerscape: remove unnecessary legacy code
Z.Q. Hou
- [U-Boot] [RFC PATCH v1 2/3] uuid: remove dependency with io.h
Patrick Delaunay
- [U-Boot] [RFC PATCH v1 3/3] sandbox: GPT over MTD test
Patrick Delaunay
- [U-Boot] [PATCH] MAINTAINERS: SUNXI: Update maintainership
Ian Campbell
- [U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information
Yehuda Yitschak
- [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration
Christoph Fritz
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Michal Simek
- [U-Boot] [PATCH v2] pwm: imx: increase support up to PWM8 for i.MX6SX
Christoph Fritz
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Liviu Dudau
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Sudeep Holla
- [U-Boot] [PATCH] armv7: psci: cpu_off: flush D-Cache before disable D-Cache
Peng Fan
- [U-Boot] [PATCH v2] MAINTAINERS: SUNXI: Update maintainership
Jagan Teki
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Liviu Dudau
- [U-Boot] [PATCH v4 1/1] ARM: ts4600: add basic board support
Fabio Estevam
- [U-Boot] [PATCH v2 0/14] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH v2 1/14] nand: sunxi: Fix modulo by zero error
Maxime Ripard
- [U-Boot] [PATCH v2 2/14] mtd: nand: add support for the TC58NVG2S0H chip
Maxime Ripard
- [U-Boot] [PATCH v2 3/14] bch: Allow to build for the host
Maxime Ripard
- [U-Boot] [PATCH v2 4/14] tools: sunxi: Add spl image builder
Maxime Ripard
- [U-Boot] [PATCH v2 5/14] common: Move environment choice to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 6/14] cmd: Add Kconfig option for CMD_MTDPARTS and related options
Maxime Ripard
- [U-Boot] [PATCH v2 7/14] mtd: sunxi: Select the U-Boot location config option
Maxime Ripard
- [U-Boot] [PATCH v2 8/14] mtd: sunxi: Change U-Boot offset
Maxime Ripard
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH v2 10/14] sunxi: Add the default mtdids and mtdparts to our env
Maxime Ripard
- [U-Boot] [PATCH v2 11/14] nand: sunxi: Add options for the SPL NAND configuration
Maxime Ripard
- [U-Boot] [PATCH v2 12/14] scripts: sunxi: Build an raw SPL image
Maxime Ripard
- [U-Boot] [PATCH v2 13/14] sunxi: Sync GR8 DTS and AXP209 with the kernel
Maxime Ripard
- [U-Boot] [PATCH v2 14/14] sunxi: Add support for the CHIP Pro
Maxime Ripard
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Maxime Ripard
- [U-Boot] [PATCH v2 1/14] nand: sunxi: Fix modulo by zero error
Boris Brezillon
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Boris Brezillon
- [U-Boot] [PATCH v2 12/14] scripts: sunxi: Build an raw SPL image
Boris Brezillon
- [U-Boot] [Resend RFC PATCH v1 0/3] GPT over MTD
Patrick Delaunay
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Patrick Delaunay
- [U-Boot] [Resend RFC PATCH v1 2/3] uuid: remove dependency with io.h
Patrick Delaunay
- [U-Boot] [Resend RFC PATCH v1 3/3] sandbox: GPT over MTD test
Patrick Delaunay
- [U-Boot] [PATCH] am57xx: Remove unused variable warnings
Tom Rini
- [U-Boot] flashair and u-boot hooks script
Michal Simek
- [U-Boot] [u-boot-2013.01.y] [NEED HELP] spl_image.flags has a bad default value
Shmuel Weiss
- [U-Boot] U-Boot x86 QEMU: Error on boot
Tom Rini
- [U-Boot] flashair and u-boot hooks script
Michal Simek
- [U-Boot] flashair and u-boot hooks script
Tom Rini
- [U-Boot] flashair and u-boot hooks script
Michal Simek
- [U-Boot] [PATCH] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH] board: topic: Detect RAM size at boot
Mike Looijmans
- [U-Boot] [Resend RFC PATCH v1 0/3] GPT over MTD
Ladislav Michl
- [U-Boot] [PATCH 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Tom Rini
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Tom Rini
- [U-Boot] [PATCH v2 3/14] bch: Allow to build for the host
Tom Rini
- [U-Boot] [PATCH v2 6/14] cmd: Add Kconfig option for CMD_MTDPARTS and related options
Tom Rini
- [U-Boot] [PATCH] net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffers
Stefan Roese
- [U-Boot] [PATCH v2 5/14] common: Move environment choice to Kconfig
Tom Rini
- [U-Boot] [PATCH v2 10/14] sunxi: Add the default mtdids and mtdparts to our env
Tom Rini
- [U-Boot] [PATCH v2 8/14] mtd: sunxi: Change U-Boot offset
Tom Rini
- [U-Boot] [PATCH] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Tom Rini
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Peter Robinson
- [U-Boot] [PATCH v4 0/2] drivers: timer: inroduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v4 1/2] drivers: timer: Introduce ARC timer driver
Vlad Zakharov
- [U-Boot] [PATCH v4 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Vlad Zakharov
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Maxime Ripard
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Ryan Harkin
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Sudeep Holla
- [U-Boot] [PATCH v2 12/14] scripts: sunxi: Build an raw SPL image
Heiko Schocher
- [U-Boot] [PATCH] arm: armv7: add us timer for bootstage
Patrick Delaunay
- [U-Boot] [PATCH 3/3] davinci: omapl138_lcdk: add MMC/SD SPL boot support
Sam Protsenko
- [U-Boot] [PATCH v2 9/14] sunxi: Enable UBI and NAND support
Tom Rini
- [U-Boot] [PATCH] arm: exynos: Use the generic lowlevel_init instead of the specific one
york sun
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v2 0/4] davinci: omapl138_lcdk: fix a few bugs for SPL boot
Fabien Parent
- [U-Boot] [PATCH v2 1/4] davinci: omapl138_lcdk: configure pll0
Fabien Parent
- [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Fabien Parent
- [U-Boot] [PATCH v2 3/4] davinci: da850evm: fix empty boot method list in the SPL
Fabien Parent
- [U-Boot] [PATCH v2 4/4] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot
Fabien Parent
- [U-Boot] [U-Boot,v2] MAINTAINERS: SUNXI: Update maintainership
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH] ls2080: efi_loader: Move EL2 switch to function call based version
Alexander Graf
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
Alexander Graf
- [U-Boot] [PATCH v8 1/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Simon Glass
- [U-Boot] [PATCH v2 1/4] davinci: omapl138_lcdk: configure pll0
Tom Rini
- [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Tom Rini
- [U-Boot] [PATCH v2 4/4] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot
Tom Rini
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Tom Rini
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Bernhard Nortmann
- [U-Boot] [PATCH] net/phy/vitesse: Rework RGMII skew configuration for VSC8601
Alexandru Gagniuc
- [U-Boot] [RFC PATCH v2 6/7] env: Introduce setenv_transient() helper function
Bernhard Nortmann
- [U-Boot] [PATCH] arm: exynos7420: remove custome low level init function
york sun
- [U-Boot] [PATCH v2 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Alexander Graf
- [U-Boot] U-Boot vulnerable to CVE-2014-4607 (LZO)?
Thomas Deutschmann
- [U-Boot] [RFC PATCH v2 7/7] env: Automatically mark dynamic configuration info as "do not export"
Bernhard Nortmann
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Simon Glass
- [U-Boot] flashair and u-boot hooks script
Stephen Warren
- [U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model.
maxims at google.com
- [U-Boot] [PATCH u-boot 1/5] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.
maxims at google.com
- [U-Boot] [PATCH u-boot 2/5] aspeed: Fixed incosistency in some SCU registers naming.
maxims at google.com
- [U-Boot] [PATCH u-boot 3/5] aspeed: Added function to calculate APB Clock frequency.
maxims at google.com
- [U-Boot] [PATCH u-boot 4/5] aspeed: Added function to configure pins for I2C devices.
maxims at google.com
- [U-Boot] [PATCH u-boot 5/5] aspeed: I2C driver.
maxims at google.com
- [U-Boot] what/where is image_entry()
Haleigh Novak
- [U-Boot] [PATCH] armv8:ls1012a: Update bootargs for fast-boot
york sun
- [U-Boot] [PATCH] configs: ls2080ardb: Enable DSPI flash support
york sun
- [U-Boot] [PATCH V2] Add support of ls1021a-iot
york sun
- [U-Boot] [PATCH 1/2][v2] lpuart: add a get_lpuart_clk function
york sun
- [U-Boot] [PATCH 2/2][v2] armv8: ls1046aqds: add lpuart support
york sun
- [U-Boot] [PATCH][v2] armv8: ls2080a: Update serdes protocol support
york sun
- [U-Boot] [PATCH][v2] driver: net: ldpaa_eth: Fix missing bracket issue
york sun
- [U-Boot] [PATCH v2] powerpc: mpc512x: Add support for get_svr() for mpc512x devices
york sun
- [U-Boot] [PATCH] fsl: serdes: fix a deadloop issue for P4080
york sun
- [U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings
york sun
- [U-Boot] [PATCH v2] arm: ls1021a: improve the core frequency to 1.2GHZ
york sun
- [U-Boot] [PATCH v3] armv8: fsl-layerscape: Add Readme for deploy QSPI image
york sun
- [U-Boot] [PATCH] armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
york sun
- [U-Boot] [PATCH 0/6][v4] Update LS2080A SoC code to support LS2088A SoC
york sun
- [U-Boot] [PATCH] arm: exynos7420: remove custome low level init function
york sun
- [U-Boot] [PATCH v8 0/3] armv8: Support loading 32-bit OS in AArch32 execution state
york sun
- [U-Boot] [PATCH V2] Add support of ls1021a-iot
york sun
- [U-Boot] [PATCH] ls2080: efi_loader: Move EL2 switch to function call based version
york sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] FDT retrived raspberry pi bootargs length > 350 characters cause setenv errors, sequemce fdt get/ set/ get truncates at the first blank in the string.
dh at synoia.com
- [U-Boot] Style modifications
Walt Feasel
- [U-Boot] [PATCH 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Lokesh Vutla
- [U-Boot] [PATCH] defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASH
Mugunthan V N
- [U-Boot] Query on qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] [U-BOOT][TEST PATCH 0/5] Cosmetic modifications api_storage.c
Walt Feasel
- [U-Boot] [U-BOOT][TEST PATCH 1/5] Cosmetic api: api_storage.c Align parenthesis
Walt Feasel
- [U-Boot] [U-BOOT][TEST PATCH 2/5] Cosmetic api: api_storage.c Blank line after {
Walt Feasel
- [U-Boot] [U-BOOT][TEST PATCH 3/5] Cosmetic api: api_storage.c Line over 80 char
Walt Feasel
- [U-Boot] [U-BOOT][TEST PATCH 4/5] Cosmetic api: api_storage.c Comment style
Walt Feasel
- [U-Boot] [U-BOOT][TEST PATCH 5/5] Cosmetic api: api_storage.c Spelling correction
Walt Feasel
- [U-Boot] flashair and u-boot hooks script
Michal Simek
- [U-Boot] [PATCH v2 0/3] ARM: DRA7: Add Kconfig support for selecting OPPs
Lokesh Vutla
- [U-Boot] [PATCH v2 1/3] ARM: OMAP4+: Add support for dynamically selecting OPPs
Lokesh Vutla
- [U-Boot] [PATCH v2 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Lokesh Vutla
- [U-Boot] [PATCH v2 3/3] ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP
Lokesh Vutla
- [U-Boot] [PATCH 00/11] ARM: ti: dra71: Add support for dra71-evm
Lokesh Vutla
- [U-Boot] [PATCH 01/11] board: ti: dra71x-evm: Add epprom support
Lokesh Vutla
- [U-Boot] [PATCH 02/11] board: ti: dra71x-evm: Add mux settings
Lokesh Vutla
- [U-Boot] [PATCH 03/11] board: ti: dra72: Introduce optimization for rgmii timing for rev C
Lokesh Vutla
- [U-Boot] [PATCH 04/11] board: ti: dra71x-evm: Add PMIC support
Lokesh Vutla
- [U-Boot] [PATCH 05/11] ARM: OMAP4+: Add support for getting pbias info from board
Lokesh Vutla
- [U-Boot] [PATCH 06/11] ARM: dts: dra7xx: sync DT with latest Linux
Lokesh Vutla
- [U-Boot] [PATCH 07/11] ARM: dts: dra71x-evm: Add DT support
Lokesh Vutla
- [U-Boot] [PATCH 08/11] configs: ti_omap5_common: Select dtb name for dra71x
Lokesh Vutla
- [U-Boot] [PATCH 09/11] configs: dra7xx: hs: Enable DM_ETH
Lokesh Vutla
- [U-Boot] [PATCH 10/11] configs: dra7xx: Enable pmic/regulator options
Lokesh Vutla
- [U-Boot] [PATCH 11/11] configs: dra7xx: Enable lp873x options
Lokesh Vutla
- [U-Boot] FDT retrived raspberry pi bootargs length > 350 characters cause setenv errors, sequemce fdt get/ set/ get truncates at the first blank in the string.
Anatolij Gustschin
- [U-Boot] T2080 l2-cache-controller compatible string overwritten by ft_fixup_l2cache
Chris Packham
- [U-Boot] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [RFC PATCH 1/7] fpga: CONFIG_SYS_FPGA_PROG_FEEDBACK -> CONFIG_FPGA_PROG_FEEDBACK
Michal Simek
- [U-Boot] [RFC PATCH 2/7] fpga: add Kconfig support for Xilinx Spartan devices
Michal Simek
- [U-Boot] [RFC PATCH 5/7] fpga: add Kconfig for CONFIG_FPGA_PROG_FEEDBACK
Michal Simek
- [U-Boot] [RFC PATCH 3/7] Move CONFIG_FPGA_SPARTAN options to defconfig
Michal Simek
- [U-Boot] [RFC PATCH 4/7] fpga/spartan3: make output quieter
Michal Simek
- [U-Boot] [RFC PATCH 7/7] fpga/spartan3: add reverse bitstream mode
Michal Simek
- [U-Boot] [RFC PATCH 6/7] Move FPGA_PROG_FEEDBACK to defconfig
Michal Simek
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model.
Heiko Schocher
- [U-Boot] [PATCH v3 0/4] serial: pxa: kconfig and optional driver model integration
Simon Glass
- [U-Boot] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH] post: cosmetic: fix typo
Tomas Melin
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PATCH v3 0/4] serial: pxa: kconfig and optional driver model integration
Marek Vasut
- [U-Boot] [PATCH v2 0/4] dm: Update on serial driver progress
Simon Glass
- [U-Boot] [PATCH v2 1/4] serial: Update docs to indicate mcfuart supports DM_SERIAL
Simon Glass
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
Simon Glass
- [U-Boot] [PATCH v2 3/4] arm: Remove VCMA9 board
Simon Glass
- [U-Boot] [PATCH v2 4/4] serial: Drop the s3c24x0 serial driver
Simon Glass
- [U-Boot] [RFC PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Tomas Melin
- [U-Boot] Blackfin in U-Boot
Simon Glass
- [U-Boot] [PATCH 0/6] dm: i2c: Set a timeline for conversion of i2c drivers
Simon Glass
- [U-Boot] [PATCH 1/6] arm: exynos: i2c: Convert exynos boards to use DM_I2C
Simon Glass
- [U-Boot] [PATCH 2/6] arm: samsung: Convert s5p_goni and smdkc100 to DM_I2C
Simon Glass
- [U-Boot] [PATCH 3/6] samsung: i2c: Drop old code from I2C driver
Simon Glass
- [U-Boot] [PATCH 4/6] samsung: i2c: Split the high-speed I2C code into a new driver
Simon Glass
- [U-Boot] [PATCH 5/6] dm: i2c: Add a note to I2C drivers which need conversion
Simon Glass
- [U-Boot] [PATCH 6/6] dm: Add timeline and guide for porting I2C drivers
Simon Glass
- [U-Boot] [U-BOOT][TEST PATCH 0/5] Cosmetic modifications api_storage.c
Walt Feasel
- [U-Boot] [PATCH 6/6] dm: Add timeline and guide for porting I2C drivers
Michal Simek
- [U-Boot] [PATCH 00/17] arm: mvebu: Add gdsys ControlCenter-Compact board
Mario Six
- [U-Boot] [PATCH 01/17] pci: mvebu: Fix Armada 38x support
Mario Six
- [U-Boot] [PATCH 02/17] arm: mvebu: Add gpio support
Mario Six
- [U-Boot] [PATCH 03/17] net: phy: Support Marvell 88E1680
Mario Six
- [U-Boot] [PATCH 04/17] mvebu: Add board_pex_config()
Mario Six
- [U-Boot] [PATCH 05/17] arm: mvebu: spl.c: Remove useless gd declaration
Mario Six
- [U-Boot] [PATCH 06/17] dm: Add callback to modify the device tree
Mario Six
- [U-Boot] [PATCH 07/17] lib: tpm: Add command to flush resources
Mario Six
- [U-Boot] [PATCH 08/17] tools: kwbimage: Fix dest addr
Mario Six
- [U-Boot] [PATCH 09/17] tools: kwbimage: Fix style violations
Mario Six
- [U-Boot] [PATCH 10/17] tools: kwbimage: Fix arithmetic with void pointers
Mario Six
- [U-Boot] [PATCH 11/17] tools: kwbimage: Reduce scope of variables
Mario Six
- [U-Boot] [PATCH 12/17] tools: kwbimage: Remove unused parameter
Mario Six
- [U-Boot] [PATCH 13/17] tools: kwbimage: Factor out add_binary_header_v1
Mario Six
- [U-Boot] [PATCH 14/17] tools: kwbimage: Refactor line parsing and fix error
Mario Six
- [U-Boot] [PATCH 15/17] arm: mvebu: Implement secure boot
Mario Six
- [U-Boot] [PATCH 16/17] arm: mvebu: Add gdsys ControlCenter-Compact board
Mario Six
- [U-Boot] [PATCH 17/17] controlcenterdc: Make secure boot available
Mario Six
- [U-Boot] [PATCH u-boot 1/5] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.
Simon Glass
- [U-Boot] [PATCH u-boot 2/5] aspeed: Fixed incosistency in some SCU registers naming.
Simon Glass
- [U-Boot] [PATCH u-boot 3/5] aspeed: Added function to calculate APB Clock frequency.
Simon Glass
- [U-Boot] [PATCH u-boot 4/5] aspeed: Added function to configure pins for I2C devices.
Simon Glass
- [U-Boot] [PATCH u-boot 5/5] aspeed: I2C driver.
Simon Glass
- [U-Boot] [PATCH 6/6] dm: Add timeline and guide for porting I2C drivers
Simon Glass
- [U-Boot] [PATCH u-boot 1/5] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board.
Simon Glass
- [U-Boot] [PATCH u-boot 2/5] aspeed: Fixed incosistency in some SCU registers naming.
Simon Glass
- [U-Boot] [PATCH u-boot 3/5] aspeed: Added function to calculate APB Clock frequency.
Simon Glass
- [U-Boot] [PATCH u-boot 4/5] aspeed: Added function to configure pins for I2C devices.
Simon Glass
- [U-Boot] [PATCH u-boot 5/5] aspeed: I2C driver.
Simon Glass
- [U-Boot] [PATCH] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH v2] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model.
Maxim Sloyko
- [U-Boot] [PATCH v2] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] U-Boot x86 QEMU: Error on boot
Eric Neblock
- [U-Boot] U-Boot x86 QEMU: Error on boot
Tom Rini
- [U-Boot] T2080 l2-cache-controller compatible string overwritten by ft_fixup_l2cache
york sun
- [U-Boot] U-Boot x86 QEMU: Error on boot
Eric Neblock
- [U-Boot] [PATCH v2 1/3] ARM: OMAP4+: Add support for dynamically selecting OPPs
Tom Rini
- [U-Boot] [PATCH v2 2/3] ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig
Tom Rini
- [U-Boot] [PATCH v2 3/3] ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP
Tom Rini
- [U-Boot] [PULL] u-boot-pxa/master
Tom Rini
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Jelle van der Waa
- [U-Boot] [PATCH v3] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH v3] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] [PATCH] armv7: ls1021aiot: Fixing SPL compiling issues
York Sun
- [U-Boot] [PATCH] image-fit: Fix compiling error caused by autoconf.h
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
york sun
- [U-Boot] [U-Boot,v2] MAINTAINERS: SUNXI: Update maintainership
Maxime Ripard
- [U-Boot] [PATCH v4] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH v4] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] [PATCH 08/24] armv8: add simple sdelay implementation
Siarhei Siamashka
- [U-Boot] [PATCH] image-fit: Fix compiling error caused by autoconf.h
Alison Wang
- [U-Boot] [PATCH 08/24] armv8: add simple sdelay implementation
André Przywara
- [U-Boot] [PATCH v2 1/7] ARM: DTS: stm32: add stm32f746-disco device tree files
Vikas MANOCHA
- [U-Boot] [PATCH 08/24] armv8: add simple sdelay implementation
Siarhei Siamashka
- [U-Boot] [PATCH v2 2/7] ARM: stm32: cleanup stm32f7 files
Vikas MANOCHA
- [U-Boot] [PATCH 09/27] sh: Use asm-generic/io.h
Vladimir Zapolskiy
- [U-Boot] [PATCH v2 5/7] ARM: stm32: enable support for smsc phy on stm32f746-disco board
Vikas MANOCHA
- [U-Boot] [RFC PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Jaehoon Chung
- [U-Boot] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH 20/24] SPL: read and store arch property from U-Boot image
Simon Glass
- [U-Boot] [PATCH 22/24] ARM: SPL/FIT: differentiate between arm and arm64 arch properties
Simon Glass
- [U-Boot] [PATCH 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Simon Glass
- [U-Boot] [PATCH] sata: fix sata command can not being executed bug
Simon Glass
- [U-Boot] [PATCH] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] [PATCH v4 1/3] spl: add RAM boot device only if it is actually defined
Simon Glass
- [U-Boot] [PATCH 1/3] image: Add FIT image loadable section custom processing
Simon Glass
- [U-Boot] [PATCH 2/3] image: Add Trusted Execution Environment image type
Simon Glass
- [U-Boot] [PATCH 3/3] RFC: board: ti: dra7xx: add FIT image TEE processing
Simon Glass
- [U-Boot] [PATCH] common: image: Remove FIT header update from image post-processing
Simon Glass
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Simon Glass
- [U-Boot] [RFC PATCH v1 3/3] sandbox: GPT over MTD test
Simon Glass
- [U-Boot] [RFC PATCH v2 7/7] env: Automatically mark dynamic configuration info as "do not export"
Simon Glass
- [U-Boot] [PATCH RESEND 7/9] video: Allow board hook before video init
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v2 1/1] cmd: pci: add option to parse and display BAR information
Simon Glass
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Simon Glass
- [U-Boot] [RFC PATCH 1/2] dm: Add support for scsi/sata based devices
Simon Glass
- [U-Boot] New UCLASS_PINCTRL driver - probe is not called for all nodes
Simon Glass
- [U-Boot] [PATCH] mmc: s5p_sdhci: fix to check proper pinmux id
Seung-Woo Kim
- [U-Boot] [PATCH 02/24] sun6i: Restrict some register initialization to Allwinner A31 SoC
Siarhei Siamashka
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Siarhei Siamashka
- [U-Boot] [PATCH] common: image: Remove FIT header update from image post-processing
Lokesh Vutla
- [U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model.
Heiko Schocher
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH] mmc: s5p_sdhci: fix to check proper pinmux id
Jaehoon Chung
- [U-Boot] [RESEND][PATCH] mmc: s5p_sdhci: fix to check proper pinmux id
Seung-Woo Kim
- [U-Boot] [PATCH 1/2] armv8:ls2080a: Reorganise NAND_BOOT code in config flag
Priyanka Jain
- [U-Boot] [PATCH 2/2] armv8: ls2080aqds: Add support for SD boot
Priyanka Jain
- [U-Boot] [PATCH 1/2][RESEND] armv8:ls2080a: Reorganise NAND_BOOT code in config flag
Priyanka Jain
- [U-Boot] [PATCH 2/2][RESEND] armv8: ls2080aqds: Add support for SD boot
Priyanka Jain
- [U-Boot] [PATCH 00/19] imx: add i.MX6SLL support
Peng Fan
- [U-Boot] [PATCH 01/19] imx: add i.MX 6SLL CPU type
Peng Fan
- [U-Boot] [PATCH 02/19] imx: mx6sll: add pinmux header files
Peng Fan
- [U-Boot] [PATCH 03/19] imx: mx6sll: update register address
Peng Fan
- [U-Boot] [PATCH 04/19] imx-common: timer: add i.MX6SLL support
Peng Fan
- [U-Boot] [PATCH 05/19] imx: mx6sll: add iomux settings
Peng Fan
- [U-Boot] [PATCH 06/19] imx: mx6: fix mmdc ch0 clk for 6SL
Peng Fan
- [U-Boot] [PATCH 07/19] imx: mx6: lcdif: gate clock before changing mux
Peng Fan
- [U-Boot] [PATCH 08/19] imx: mx6sl: add lcdif clock support
Peng Fan
- [U-Boot] [PATCH 09/19] imx: clock: gate clk before changing pix clk mux
Peng Fan
- [U-Boot] [PATCH 10/19] imx: mx6sll: add clock support
Peng Fan
- [U-Boot] [PATCH 11/19] imx-common: cache: configure L2 Cache for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH 12/19] imx: mx6sll: add Kconfig entry for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH 13/19] mx6_common: correct loadaddr and text base for i.MX6SLL
Peng Fan
- [U-Boot] [PATCH 14/19] OCOTP: Update OCOTP driver to support i.MX6SLL
Peng Fan
- [U-Boot] [PATCH 15/19] imx-common: lcdif: update lcdif regs for i.MX6SL/SLL
Peng Fan
- [U-Boot] [PATCH 16/19] pinctrl: imx6: support i.MX6SLL
Peng Fan
- [U-Boot] [PATCH 17/19] arm: dts: add i.MX6SLL device tree
Peng Fan
- [U-Boot] [PATCH 18/19] arm: imx: add i.MX6SLL EVK board support
Peng Fan
- [U-Boot] [PATCH 19/19] imx: mx6sllevk: add plugin support
Peng Fan
- [U-Boot] [PATCH] fsl/usb: enable the errata-a005697 for ls1012a
Changming Huang
- [U-Boot] [PATCH v2 0/4] Enable the host controller and hub on PopMetal board
Kever Yang
- [U-Boot] [PATCH v2 1/4] usb: dwc2: add support for external vbus supply
Kever Yang
- [U-Boot] [PATCH v2 2/4] board: popmetal: de-assert the host rst pin in board init
Kever Yang
- [U-Boot] [PATCH v2 3/4] config: popmetal: enable the USB host controller and function
Kever Yang
- [U-Boot] [PATCH v2 4/4] dts: popmetal: add usb host power supply node
Kever Yang
- [U-Boot] [PATCH 01/97] tools/env: Correct include kconfig
York Sun
- [U-Boot] [PATCH 02/97] powerpc: MPC8548: Move CONFIG_MPC8548 to Kconfig option
York Sun
- [U-Boot] [PATCH 03/97] powerpc: MPC8548CDS: Remove macro CONFIG_MPC8548CDS
York Sun
- [U-Boot] [PATCH 04/97] powerpc: MPC8544: Move CONFIG_MPC8544 to Kconfig option
York Sun
- [U-Boot] [PATCH 05/97] powerpc: MPC8544DS: Remove macro CONFIG_MPC8544DS
York Sun
- [U-Boot] [PATCH 06/97] powerpc: BSC9131/2: Move CONFIG_BSC9131/2 to Kconfig options
York Sun
- [U-Boot] [PATCH 07/97] powerpc: BSC9131RDB: Remove CONFIG_BSC9131RDB macro
York Sun
- [U-Boot] [PATCH 08/97] powerpc: BSC9132QDS: Remove CONFIG_BSC9132QDS macro
York Sun
- [U-Boot] [PATCH 09/97] powerpc: C29X: Move CONFIG_PPC_C29X to Kconfig option
York Sun
- [U-Boot] [PATCH 10/97] powerpc: C29XPCIE: Remove macro CONFIG_C29XPCIE
York Sun
- [U-Boot] [PATCH 11/97] powerpc: MPC8536: Move CONFIG_MPC8536 to Kconfig option
York Sun
- [U-Boot] [PATCH 12/97] powerpc: MPC8536DS: Remove macro CONFIG_MPC8536DS
York Sun
- [U-Boot] [PATCH 13/97] powerpc: mpc8540: Remove macro CONFIG_MPC8540
York Sun
- [U-Boot] [PATCH 14/97] powerpc: MPC8540ADS: Remove macro CONFIG_MPC8540ADS
York Sun
- [U-Boot] [PATCH 15/97] powerpc: mpc8541: Remove macro CONFIG_MPC8541
York Sun
- [U-Boot] [PATCH 16/97] powerpc: MPC8541CDS: Remove macro CONFIG_MPC8541CDS
York Sun
- [U-Boot] [PATCH 17/97] powerpc: MPC8555: Remove macro CONFIG_MPC8555
York Sun
- [U-Boot] [PATCH 18/97] powerpc: MPC8555CDS: Remove macro CONFIG_MPC8555CDS
York Sun
- [U-Boot] [PATCH 19/97] powerpc: MPC8560: Remove macro CONFIG_MPC8560
York Sun
- [U-Boot] [PATCH 20/97] powerpc: MPC8560ADS: Remove macro CONFIG_MPC8560ADS
York Sun
- [U-Boot] [PATCH 21/97] powerpc: MPC8568: Remove macro CONFIG_MPC8568
York Sun
- [U-Boot] [PATCH 22/97] powerpc: MPC8568MDS: Remove macro CONFIG_MPC8568MDS
York Sun
- [U-Boot] [PATCH 23/97] powerpc: MPC8569: Remove macro CONFIG_MPC8569
York Sun
- [U-Boot] [PATCH 24/97] powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDS
York Sun
- [U-Boot] [PATCH 25/97] powerpc: MPC8572: Remove macro CONFIG_MPC8572
York Sun
- [U-Boot] [PATCH 26/97] powerpc: MPC8572DS: Remove macro CONFIG_MPC8572DS
York Sun
- [U-Boot] [PATCH 27/97] powerpc: xpedite: Remove macro CONFIG_XPEDITE5370
York Sun
- [U-Boot] [PATCH 28/97] powerpc: P1010: Remove macro CONFIG_P1010
York Sun
- [U-Boot] [PATCH 29/97] powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB
York Sun
- [U-Boot] [PATCH 30/97] powerpc: P1022: Remove macro CONFIG_P1022
York Sun
- [U-Boot] [PATCH 31/97] powerpc: P1022DS: Remove macro CONFIG_P1022DS
York Sun
- [U-Boot] [PATCH 32/97] powerpc: P1023: Remove macro CONFIG_P1023
York Sun
- [U-Boot] [PATCH 33/97] powerpc: P1011: Remove macro CONFIG_P1011
York Sun
- [U-Boot] [PATCH 34/97] powerpc: P1012: Drop configuration for P1012
York Sun
- [U-Boot] [PATCH 35/97] powerpc: P1013: Drop configuration for P1013
York Sun
- [U-Boot] [PATCH 36/97] powerpc: P1014: Drop configuration for P1014
York Sun
- [U-Boot] [PATCH 37/97] powerpc: P1017: Drop configuration for P1017
York Sun
- [U-Boot] [PATCH 38/97] powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 39/97] powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 40/97] powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 41/97] powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig
York Sun
- [U-Boot] [PATCH 42/97] powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 43/97] powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 44/97] powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 45/97] powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
York Sun
- [U-Boot] [PATCH 46/97] powerpc: P1_P2_RDB_PC: Drop TARGET_P1_P2_RDB_PC
York Sun
- [U-Boot] [PATCH 47/97] powerpc: P1020: Remove macro CONFIG_P1020
York Sun
- [U-Boot] [PATCH 48/97] powerpc: P1021: Remove macro CONFIG_P1021
York Sun
- [U-Boot] [PATCH 49/97] powerpc: P1024: Remove CONFIG_P1024
York Sun
- [U-Boot] [PATCH 50/97] powerpc: P1025: Remove macro CONFIG_P1025
York Sun
- [U-Boot] [PATCH 51/97] powerpc: P2020: Remove macro CONFIG_P2020
York Sun
- [U-Boot] [PATCH 52/97] powerpc: P2010: Drop configuration for P2010
York Sun
- [U-Boot] [PATCH 53/97] powerpc: P2041: Remove macro CONFIG_PPC_P2041
York Sun
- [U-Boot] [PATCH 54/97] powerpc: P2041RDB: Remove macro CONFIG_P2041RDB
York Sun
- [U-Boot] [PATCH 55/97] powerpc: P3041: Remove macro CONFIG_PPC_P3041
York Sun
- [U-Boot] [PATCH 56/97] powerpc: P3041DS: Remove macro CONFIG_P3041DS
York Sun
- [U-Boot] [PATCH 57/97] powerpc: P4080: Remove macro CONFIG_PPC_P4080
York Sun
- [U-Boot] [PATCH 58/97] powerpc: P4080DS: Remove macro CONFIG_P4080DS
York Sun
- [U-Boot] [PATCH 59/97] powerpc: P5020: Remove macro CONFIG_PPC_P5020
York Sun
- [U-Boot] [PATCH 60/97] powerpc: P5020DS: Remove macro CONFIG_P5020DS
York Sun
- [U-Boot] [PATCH 61/97] powerpc: P5040: Remove macro CONFIG_P5040
York Sun
- [U-Boot] [PATCH 62/97] powerpc: P5040DS: Remove macro CONFIG_P5040DS
York Sun
- [U-Boot] [PATCH 63/97] powerpc: B4420QDS: Split from B4860QDS in Kconfig
York Sun
- [U-Boot] [PATCH 64/97] powerpc: B4860: Remove macro CONFIG_PPC_B4860
York Sun
- [U-Boot] [PATCH 65/97] powerpc: B4860QDS: Remove macro CONFIG_B4860QDS
York Sun
- [U-Boot] [PATCH 66/97] powerpc: B4420: Remove macro CONFIG_PPC_B4420
York Sun
- [U-Boot] [PATCH 67/97] powerpc: QEMU_E500: Remove macro CONFIG_QEMU_E500
York Sun
- [U-Boot] [PATCH 68/97] powerpc: T102xRDB: Split as T1023RDB and T1024RDB
York Sun
- [U-Boot] [PATCH 69/97] powerpc: T1023: Remove macro CONFIG_PPC_T1023
York Sun
- [U-Boot] [PATCH 70/97] powerpc: T1024QDS: Rename Kconfig option to match the name
York Sun
- [U-Boot] [PATCH 71/97] powerpc: T1024: Remove macro CONFIG_PPC_T1024
York Sun
- [U-Boot] [PATCH 72/97] powerpc: T104XRDB: Split to T1040RDB and T1042RDB in Kconfig
York Sun
- [U-Boot] [PATCH 73/97] powerpc: T1040: Remove macro CONFIG_PPC_T1040
York Sun
- [U-Boot] [PATCH 74/97] powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
York Sun
- [U-Boot] [PATCH 75/97] powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
York Sun
- [U-Boot] [PATCH 76/97] powerpc: T1042: Remove macro CONFIG_PPC_T1042
York Sun
- [U-Boot] [PATCH 77/97] powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig
York Sun
- [U-Boot] [PATCH 78/97] powerpc: T1042D4RDB: Separate from T1042RDB in Kconfig
York Sun
- [U-Boot] [PATCH 79/97] powerpc: T1042RDB: Remove macro CONFIG_T1042RDB
York Sun
- [U-Boot] [PATCH 80/97] powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB
York Sun
- [U-Boot] [PATCH 81/97] powerpc: T208XQDS: Split as T2080QDS and T2081QDS
York Sun
- [U-Boot] [PATCH 82/97] powerpc: T2080RDB: Rename from T208XRDB in Kconfig
York Sun
- [U-Boot] [PATCH 83/97] powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081
York Sun
- [U-Boot] [PATCH 84/97] powerpc: T4160QDS: Separate from T4240QDS in Kconfig
York Sun
- [U-Boot] [PATCH 85/97] powerpc: T4240QDS: Remove macro CONFIG_T4240QDS
York Sun
- [U-Boot] [PATCH 86/97] powerpc: T4160RDB: Separate from T4240RDB in Kconfig
York Sun
- [U-Boot] [PATCH 87/97] powerpc: T4240RDB: Remove macro CONFIG_T4240RDB
York Sun
- [U-Boot] [PATCH 88/97] powerpc: T4160: Remove macro CONFIG_PPC_T4160
York Sun
- [U-Boot] [PATCH 89/97] powerpc: T4240: Remove macro CONFIG_PPC_T4240
York Sun
- [U-Boot] [PATCH 90/97] powerpc: T4080: Drop configuration for T4080
York Sun
- [U-Boot] [PATCH 91/97] powerpc: mpc85xx: Move CONFIG_MAX_CPUS to Kconfig
York Sun
- [U-Boot] [PATCH 92/97] powerpc: MPC8610: Remove macro CONFIG_MPC8610
York Sun
- [U-Boot] [PATCH 93/97] powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCD
York Sun
- [U-Boot] [PATCH 94/97] powerpc: MPC8641: Remove macro CONFIG_MPC8641
York Sun
- [U-Boot] [PATCH 95/97] powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCN
York Sun
- [U-Boot] [PATCH 96/97] powerpc: mpc86xx: Remove macro CONFIG_MAX_CPUS
York Sun
- [U-Boot] [PATCH 97/97] powerpc: Drop default CONFIG_MAX_CPUS
York Sun
- [U-Boot] [PATCH 00/97] Replace some powerpc CONFIG_* macros to Kconfig options
york sun
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCH 3/6] arm64: mvebu: pinctrl: Add pin control driver for A8K family
Kostya Porotchkin
- [U-Boot] [PATCH 2/6] arm64: mvebu: Add bubt command for flash image burn
Stefan Roese
- [U-Boot] [PATCH 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
- [U-Boot] FDT retrived raspberry pi bootargs length > 350 characters cause setenv errors, sequemce fdt get/ set/ get truncates at the first blank in the string.
Anatolij Gustschin
- [U-Boot] [PATCH 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
Stefan Roese
- [U-Boot] [U-Boot,v2] MAINTAINERS: SUNXI: Update maintainership
Jagan Teki
- [U-Boot] [PATCH 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Kostya Porotchkin
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCH v5] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] what/where is image_entry()
Anatolij Gustschin
- [U-Boot] [PATCH 02/24] sun6i: Restrict some register initialization to Allwinner A31 SoC
Andre Przywara
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Patrick DELAUNAY
- [U-Boot] [PATCH 1/6] arm64: mvebu: Modify the A8K SPI and I2C config in DTS
Stefan Roese
- [U-Boot] [PATCH v2 0/3] ARM: ti: DFU environment consolidation + AM57x DFU
Sekhar Nori
- [U-Boot] [PATCH v2 1/3] board: ti: am57xx-evm: fix build warnings
Sekhar Nori
- [U-Boot] [PATCH v2 2/3] ARM: ti: consolidate dfu environment variables
Sekhar Nori
- [U-Boot] [PATCH v2 3/3] ARM: am57xx_evm: enable DFU support
Sekhar Nori
- [U-Boot] [PATCH v4 2/2] arc: use timer driver instead of arch/arc/lib/timer.c
Alexey Brodkin
- [U-Boot] [PATCH] cmd/fdt: fix uncallable systemsetup command
Fabien Parent
- [U-Boot] [PATCH 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
Kostya Porotchkin
- [U-Boot] [Resend RFC PATCH v1 0/3] GPT over MTD
Patrick DELAUNAY
- [U-Boot] Pull request: u-boot-spi/sunxi
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/sunxi
Maxime Ripard
- [U-Boot] [PATCH v2 2/7] ARM: stm32: cleanup stm32f7 files
Michael Kurz
- [U-Boot] GPL-Archive for UniFi(R) AP AC PRO fw 3.4.17.3440
Charlemagne Lasse
- [U-Boot] GPL-Archive for UniFi(R) AP AC PRO fw 3.4.17.3440
Andy P. (Ubiquiti Networks)
- [U-Boot] GPL-Archive for UniFi(R) AP AC PRO fw 3.4.17.3440
Andy P. (Ubiquiti Networks)
- [U-Boot] Pull request: u-boot-spi/sunxi
Hans de Goede
- [U-Boot] [PATCH 4/6] arm64: mvebu: Add pin control nodes to A8K family DTS files
Stefan Roese
- [U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support
Jagan Teki
- [U-Boot] Query on qspi driver
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/sunxi
Jagan Teki
- [U-Boot] [Pull request v2]: u-boot-spi/sunxi
Jagan Teki
- [U-Boot] [PATCH v3 0/9] ARM: stm32: add network and qspi driver support to stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH v3 1/9] ARM: DTS: stm32: add stm32f746 device tree pin control files
Michael Kurz
- [U-Boot] [PATCH v3 2/9] ARM: DTS: stm32: add stm32f746-disco device tree files
Michael Kurz
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Michael Kurz
- [U-Boot] [PATCH v3 4/9] ARM: stm32: fix stm32f7 sdram fmc base address
Michael Kurz
- [U-Boot] [PATCH v3 5/9] ARM: stm32: use clock setup function defined in clock.c
Michael Kurz
- [U-Boot] [PATCH v3 6/9] net: stm32: add designware mac glue code for stm32
Michael Kurz
- [U-Boot] [PATCH v3 7/9] net: phy: add SMSC LAN8742 phy
Michael Kurz
- [U-Boot] [PATCH v3 8/9] ARM: stm32: enable support for smsc phy on stm32f746-disco board
Michael Kurz
- [U-Boot] [PATCH v3 9/9] ARM: SPI: stm32: add stm32f746 qspi driver
Michael Kurz
- [U-Boot] [PATCH] spi: Zap armada100_spi.c and env
Jagan Teki
- [U-Boot] [PATCH] spi: Zap mpc52xx_spi.c and config
Jagan Teki
- [U-Boot] About U-boot's TPM
Ronny Ko
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Maxime Ripard
- [U-Boot] FDT retrived raspberry pi bootargs length > 350 characters cause setenv errors, sequemce fdt get/ set/ get truncates at the first blank in the string.
dh at synoia.com
- [U-Boot] [PATCH] armv8/spin_table.c: fix spin table release address
Tsung-Han Lin
- [U-Boot] [PATCH 18/19] arm: imx: add i.MX6SLL EVK board support
Fabio Estevam
- [U-Boot] [RFC PATCH 1/7] fpga: CONFIG_SYS_FPGA_PROG_FEEDBACK -> CONFIG_FPGA_PROG_FEEDBACK
Chris Packham
- [U-Boot] [RFC PATCH 5/7] fpga: add Kconfig for CONFIG_FPGA_PROG_FEEDBACK
Chris Packham
- [U-Boot] [RFC PATCH 3/7] Move CONFIG_FPGA_SPARTAN options to defconfig
Chris Packham
- [U-Boot] [Pull request v2]: u-boot-spi/sunxi
Chen-Yu Tsai
- [U-Boot] [PATCH 18/19] arm: imx: add i.MX6SLL EVK board support
Peng Fan
- [U-Boot] [PATCH v2 1/3] board: ti: am57xx-evm: fix build warnings
Lokesh Vutla
- [U-Boot] [PATCH] spi: Zap armada100_spi.c and env
Ajay Bhargav
- [U-Boot] [PATCH 1/3] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Jaehoon Chung
- [U-Boot] [PATCH 0/9] ARM: ti: am57xx: Add support for latest am57xx boards
Lokesh Vutla
- [U-Boot] [PATCH 1/9] ARM: dts: am57xx: sync DT with latest Linux
Lokesh Vutla
- [U-Boot] [PATCH 2/9] board: ti: am57xx: Add support for detection of reva3 variations for GPEVM
Lokesh Vutla
- [U-Boot] [PATCH 3/9] board: ti: am57xx: Add support for detection of X15 revb1
Lokesh Vutla
- [U-Boot] [PATCH 4/9] board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVM
Lokesh Vutla
- [U-Boot] [PATCH 5/9] board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMT
Lokesh Vutla
- [U-Boot] [PATCH 6/9] board: ti: am572x-idk: Update pinmux using latest PMT
Lokesh Vutla
- [U-Boot] [PATCH 7/9] board: ti: am57xx: Add support for the am571x idk
Lokesh Vutla
- [U-Boot] [PATCH 8/9] ARM: dts: AM571x-IDK Initial Support
Lokesh Vutla
- [U-Boot] [PATCH 9/9] ti_armv7_common: env: Increase IO buffer size
Lokesh Vutla
- [U-Boot] [PATCH v2 1/3] board: ti: am57xx-evm: fix build warnings
Sekhar Nori
- [U-Boot] [PATCH 2/3] mmc: zynq: Determine base clock frequency via clock framework
Jaehoon Chung
- [U-Boot] [RESEND][PATCH] mmc: s5p_sdhci: fix to check proper pinmux id
Jaehoon Chung
- [U-Boot] [RFC PATCH 1/7] fpga: CONFIG_SYS_FPGA_PROG_FEEDBACK -> CONFIG_FPGA_PROG_FEEDBACK
Michal Simek
- [U-Boot] [RFC PATCH 5/7] fpga: add Kconfig for CONFIG_FPGA_PROG_FEEDBACK
Michal Simek
- [U-Boot] [PATCH v2] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH v2] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Tomas Melin
- [U-Boot] [PATCH 1/3] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Stefan.Herbrechtsmeier at weidmueller.de
- [U-Boot] [RFC PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Tomas Melin
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Hans de Goede
- [U-Boot] [Pull request v2]: u-boot-spi/sunxi
Maxime Ripard
- [U-Boot] [RFC PATCH 3/7] Move CONFIG_FPGA_SPARTAN options to defconfig
Chris Packham
- [U-Boot] [PATCH v3 0/2] ARM: ti: DFU environment consolidation + AM57x DFU
Sekhar Nori
- [U-Boot] [PATCH v3 1/2] ARM: ti: consolidate dfu environment variables
Sekhar Nori
- [U-Boot] [PATCH v3 2/2] ARM: am57xx_evm: enable DFU support
Sekhar Nori
- [U-Boot] [PATCH v2] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH v3] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [RFC PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Jaehoon Chung
- [U-Boot] [PATCH 2/3] mmc: zynq: Determine base clock frequency via clock framework
Stefan.Herbrechtsmeier at weidmueller.de
- [U-Boot] [PATCH] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v2 1/2] splash: add support for loading splash from a FIT image
Tomas Melin
- [U-Boot] [PATCH v2 2/2] splash: sort include files
Tomas Melin
- [U-Boot] [PATCH 0/5] davinci: omapl138_lcdk: patch DT with MAC Address
Fabien Parent
- [U-Boot] [PATCH 1/5] davinci: omapl138_lcdk: fixup mac address in dtb
Fabien Parent
- [U-Boot] [PATCH 2/5] davinci: omapl138_lcdk: improve readability of boot command
Fabien Parent
- [U-Boot] [PATCH 3/5] davinci: omapl138_lcdk: add DT support for EMMC boot
Fabien Parent
- [U-Boot] [PATCH 4/5] davinci: omapl138_lcdk: do fdt systemsetup when loading DT
Fabien Parent
- [U-Boot] [PATCH 5/5] davinci: omapl138_lcdk: enable OF_SYSTEM_SETUP in defconfig
Fabien Parent
- [U-Boot] [PATCH v5] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] [PATCH] armv8/spin_table.c: fix spin table release address
Tsung-Han Lin
- [U-Boot] [PATCH v4 0/6] Add ARMv8 PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH v4 1/6] ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
Hongbo Zhang
- [U-Boot] [PATCH v4 2/6] ARMv8: Enable SMC instruction
Hongbo Zhang
- [U-Boot] [PATCH v4 3/6] ARMv8: Add secure sections for PSCI text and data
Hongbo Zhang
- [U-Boot] [PATCH v4 4/6] ARMv8: Add basic PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH v4 5/6] ARMv8: Setup PSCI memory and device tree
Hongbo Zhang
- [U-Boot] [PATCH v4 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Bernhard Nortmann
- [U-Boot] [PATCH] colibri_vf: Read kernel and device tree from static UBI volumes
Sanchayan Maity
- [U-Boot] [Resend RFC PATCH v1 0/3] GPT over MTD
Ladislav Michl
- [U-Boot] [PATCH 0/7] SF: Cadence QSPI driver fixes and clean up
Phil Edworthy
- [U-Boot] [PATCH 12/15] pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese
- [U-Boot] [PATCH v2 0/4] mmc: sdhci: Add support for frequency constrained peripheral interfaces
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 1/4] mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 2/4] serial: zynq: Remove unused index from get uart clock function
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 3/4] mmc: zynq: Determine base clock frequency via clock framework
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 4/4] mmc: zynq: Add fdt max-frequency support
Stefan Herbrechtsmeier
- [U-Boot] [Pull request v2]: u-boot-spi/sunxi
Jagan Teki
- [U-Boot] [PATCH 0/7] SF: Cadence QSPI driver fixes and clean up
Jagan Teki
- [U-Boot] [PATCH v2 0/8] SF: Cadence QSPI driver fixes and clean up
Phil Edworthy
- [U-Boot] [PATCH v2 1/8] spi: cadence_qspi: Fix clearing of pol/pha bits
Phil Edworthy
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH v2 3/8] spi: cadence_qspi: Better debug information on the SPI clock rate
Phil Edworthy
- [U-Boot] [PATCH v2 4/8] spi: cadence_qspi: Use #define for bits instead of bit shifts
Phil Edworthy
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: Clean up the #define names
Phil Edworthy
- [U-Boot] [PATCH v2 6/8] spi: cadence_qspi: Remove returns from end of void functions
Phil Edworthy
- [U-Boot] [PATCH v2 7/8] spi: cadence_qspi: Fix CS timings
Phil Edworthy
- [U-Boot] [PATCH v2 8/8] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v2 1/8] spi: cadence_qspi: Fix clearing of pol/pha bits
Marek Vasut
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Marek Vasut
- [U-Boot] [PATCH v2 3/8] spi: cadence_qspi: Better debug information on the SPI clock rate
Marek Vasut
- [U-Boot] [PATCH v2 4/8] spi: cadence_qspi: Use #define for bits instead of bit shifts
Marek Vasut
- [U-Boot] [PATCH v2 1/7] scsi: Extract block device initialization
Michal Simek
- [U-Boot] [PATCH v2 2/7] scsi: Extract device detection algorithm
Michal Simek
- [U-Boot] [PATCH v2 3/7] scsi: Take lun from device block description
Michal Simek
- [U-Boot] [PATCH v2 4/7] scsi: Move pccb buffer initalization directly to scsi_detect_dev
Michal Simek
- [U-Boot] [PATCH v2 5/7] scsi: Simplify scsi_read/scsi_write()
Michal Simek
- [U-Boot] [PATCH v2 6/7] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] [PATCH v2 7/7] block: Move ceva driver to DM
Michal Simek
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: Clean up the #define names
Marek Vasut
- [U-Boot] [PATCH v2 6/8] spi: cadence_qspi: Remove returns from end of void functions
Marek Vasut
- [U-Boot] [PATCH v2 7/8] spi: cadence_qspi: Fix CS timings
Marek Vasut
- [U-Boot] [PATCH v2 8/8] spi: cadence_qspi: Support specifying the sample edge used
Marek Vasut
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH v2 4/8] spi: cadence_qspi: Use #define for bits instead of bit shifts
Phil Edworthy
- [U-Boot] [PATCH v2 8/8] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v2 1/8] spi: cadence_qspi: Fix clearing of pol/pha bits
Jagan Teki
- [U-Boot] [PATCHv4] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 01/14] net: cosmetic: Do not use magic values for ARP_HLEN
Olliver Schinagl
- [U-Boot] [PATCH 02/14] net: cosmetic: Make the MAC address string less magical
Olliver Schinagl
- [U-Boot] [PATCH 03/14] net: cosmetic: Define ethernet name length
Olliver Schinagl
- [U-Boot] [PATCH 04/14] net: core: Sanitize get/set operations for enetaddr
Olliver Schinagl
- [U-Boot] [PATCH 05/14] net: core: cosmetic: A MAC address is not limited to SROM
Olliver Schinagl
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Olliver Schinagl
- [U-Boot] [PATCH 07/14] net: core: Inform the user of the device MAC address
Olliver Schinagl
- [U-Boot] [PATCH 08/14] net: core: Add function to check/set MAC locality
Olliver Schinagl
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 10/14] fdt: fixup_eth: Remove code duplication with a function
Olliver Schinagl
- [U-Boot] [PATCH 11/14] fdt: eth_fixup: improve error catching/reduce identation
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH 13/14] tools: Allow crc8 to be used
Olliver Schinagl
- [U-Boot] [PATCH 14/14] tools: Add tool to add crc8 to a mac address
Olliver Schinagl
- [U-Boot] [PATCH v2 1/8] spi: cadence_qspi: Fix clearing of pol/pha bits
Phil Edworthy
- [U-Boot] [PATCH] sunxi: net: Use net_ops hooks to get the MAC
Olliver Schinagl
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 2/6] net: sunxi-emac: Write HW address via function
Olliver Schinagl
- [U-Boot] [PATCH 3/6] net: sunxi-emac: Add write_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 4/6] net: sunxi-emac: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 5/6] arm: sunxi: Use board hooks to obtain MAC address
Olliver Schinagl
- [U-Boot] [PATCH 6/6] net: sunxi: Enable eeprom on OLinuXino Lime boards
Olliver Schinagl
- [U-Boot] [PATCH] Fix zynq returning a wrong retval in read_rom_hwaddr
Olliver Schinagl
- [U-Boot] [PATCH] net: zynq_gem: Return 0 on success, not -ENOSYS
Olliver Schinagl
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Jagan Teki
- [U-Boot] [PATCH 00/14] [PATCHv4] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH] Use eth_ops hooks to set the MAC address
Olliver Schinagl
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Marek Vasut
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH v2 4/8] spi: cadence_qspi: Use #define for bits instead of bit shifts
Jagan Teki
- [U-Boot] [PATCH v2 2/8] spi: cadence_qspi: Fix baud rate calculation
Jagan Teki
- [U-Boot] [PATCH] sun8i_emac: Fix mdio read sequence
Jagan Teki
- [U-Boot] [PATCH] sun8i_emac: Fix mdio read sequence
Dr. Philipp Tomsich
- [U-Boot] Macronix NOR_SPI and Quad I/O
Champ, Andy
- [U-Boot] [PATCH v2 1/4] usb: dwc2: add support for external vbus supply
Marek Vasut
- [U-Boot] Please pull u-boot-fdt
Simon Glass
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Fabio Estevam
- [U-Boot] [PATCH v2 3/14] bch: Allow to build for the host
Jagan Teki
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Jagan Teki
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] [PATCH] MAINTAINERS: Fix ALTERA SOCFPGA Files
Jagan Teki
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Jagan Teki
- [U-Boot] (no subject)
Rick Bronson
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Marek Vasut
- [U-Boot] [PATCH] mx6sx: Add initial support for UDOO Neo Board
Breno Lima
- [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties
Simon Glass
- [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY
Simon Glass
- [U-Boot] [PATCH 00/82] x86: Add initial support for 64-bit U-Boot
Simon Glass
- [U-Boot] [PATCH 1/3] power: regulator: Introduce regulator_set_value_force function
Simon Glass
- [U-Boot] [PATCH 2/3] power: regulator: Add limits checking while setting voltage
Simon Glass
- [U-Boot] [PATCH 3/3] power: regulator: Add limits checking while setting current
Simon Glass
- [U-Boot] [PATCH] arm: dts: Fix Rockchip sort order
Simon Glass
- [U-Boot] [PATCH] arm: rockchip: Fix typo in ROCKCHIP_RK3288 help
Simon Glass
- [U-Boot] [PATCH] evb-rk3399: deduced the dram node size when space reserved
Simon Glass
- [U-Boot] [PATCH] config: evb-rk3399: enable PWM_ROCKCHIP
Simon Glass
- [U-Boot] [PATCH 1/4] config: rk3036: enable configs for USB HOST
Simon Glass
- [U-Boot] [PATCH 2/4] config: rk3036: enable fix regulator
Simon Glass
- [U-Boot] [PATCH 3/4] dts: arm: rk3036: add usb vbus node
Simon Glass
- [U-Boot] [PATCH v2 01/22] rockchip: video: Correct HDMI data source selection
Simon Glass
- [U-Boot] [PATCH v2 03/22] rockchip: Allow jerry to use of-platdata
Simon Glass
- [U-Boot] [PATCH v2 05/22] stdio: Correct code style nits
Simon Glass
- [U-Boot] [PATCH v2 06/22] stdio: Correct numbering logic in stdio_probe_device()
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH v2 12/22] video: Use cache-alignment in video_sync()
Simon Glass
- [U-Boot] [PATCH v2 13/22] video: Track whether a display is in use
Simon Glass
- [U-Boot] [PATCH v2 16/22] rockchip: Rename jerry files to veyron
Simon Glass
- [U-Boot] [PATCH v2 17/22] rockchip: veyron: Add a note about the SDRAM voltage
Simon Glass
- [U-Boot] [PATCH v2 19/22] rockchip: clk: Support setting ACLK
Simon Glass
- [U-Boot] [PATCH v2 22/22] rockchip: Add support for veyron-mickey (Chromebit)
Simon Glass
- [U-Boot] Please pull u-boot-rockchip
Simon Glass
- [U-Boot] Please pull u-boot-fdt
Simon Glass
- [U-Boot] [PATCH v2 2/4] board: popmetal: de-assert the host rst pin in board init
Simon Glass
- [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Fabio Estevam
- [U-Boot] [PATCH] mx6sx: Add initial support for UDOO Neo Board
Fabio Estevam
- [U-Boot] [Pull request v2]: u-boot-spi/sunxi
Tom Rini
- [U-Boot] [PATCH] arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated
Sven Ebenfeld
- [U-Boot] [PATCH 01/14] mips: Let cache.h be included from assembly source
Marek Vasut
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Marek Vasut
- [U-Boot] [PATCH 03/14] mmc: Fix warning if debug() is not used
Marek Vasut
- [U-Boot] [PATCH 04/14] serial: 16550: Add getfcr accessor
Marek Vasut
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] [PATCH 06/14] serial: 16550: Add Ingenic JZ4780 support
Marek Vasut
- [U-Boot] [PATCH 07/14] mmc: Tinification of the mmc code
Marek Vasut
- [U-Boot] [PATCH 08/14] mmc: Add JZ47xx SD/MMC controller driver
Marek Vasut
- [U-Boot] [PATCH 09/14] gpio: Add JZ47xx GPIO driver
Marek Vasut
- [U-Boot] [PATCH 10/14] misc: Add JZ47xx efuse driver
Marek Vasut
- [U-Boot] [PATCH 11/14] mips: Add SPL header
Marek Vasut
- [U-Boot] [PATCH 12/14] mips: jz47xx: Add JZ4780 SoC support
Marek Vasut
- [U-Boot] [PATCH 13/14] mips: jz47xx: Add minimal JZ MMC node
Marek Vasut
- [U-Boot] [PATCH 14/14] mips: jz47xx: Add Creator CI20 platform
Marek Vasut
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PATCH] armv8/spin_table.c: fix spin table release address
Tsung-Han Lin
- [U-Boot] [PATCH v3] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY
Masahiro Yamada
- [U-Boot] Please pull u-boot-rockchip (take 2)
Simon Glass
- [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY
Masahiro Yamada
- [U-Boot] [PATCH] armv8/spin_table.c: fix spin table release address
Masahiro Yamada
- [U-Boot] Macronix NOR_SPI and Quad I/O
Jagan Teki
- [U-Boot] [PATCH v6 00/13] binman: A tool for creating firmware images
Simon Glass
- [U-Boot] [PATCH v6 01/13] binman: Introduce binman, a tool for building binary images
Simon Glass
- [U-Boot] [PATCH v6 02/13] binman: Add basic entry types for U-Boot
Simon Glass
- [U-Boot] [PATCH v6 03/13] binman: Add support for building x86 ROMs
Simon Glass
- [U-Boot] [PATCH v6 04/13] binman: Add support for u-boot.img as an input binary
Simon Glass
- [U-Boot] [PATCH v6 05/13] binman: Add support for building x86 ROMs with SPL
Simon Glass
- [U-Boot] [PATCH v6 06/13] binman: Add support for building x86 images with FSP/CMC
Simon Glass
- [U-Boot] [PATCH v6 07/13] binman: Add a build rule for binman
Simon Glass
- [U-Boot] [PATCH v6 08/13] binman: Allow configuration options to be used in .dts files
Simon Glass
- [U-Boot] [PATCH v6 09/13] binman: Automatically include a U-Boot .dtsi file
Simon Glass
- [U-Boot] [PATCH v6 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [PATCH v6 11/13] sunxi: Use binman for sunxi boards
Simon Glass
- [U-Boot] [PATCH v6 12/13] x86: Use binman all x86 boards
Simon Glass
- [U-Boot] [PATCH v6 13/13] binman: Drop microcode features from ifdtool
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Jagan Teki
- [U-Boot] [PATCH] compiler.h: use u-boot endian macros on OpenBSD
Jonathan Gray
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
David Müller (ELSOFT AG)
- [U-Boot] [PATCH v2 3/4] arm: Remove VCMA9 board
David Müller (ELSOFT AG)
- [U-Boot] [PATCH v2 4/4] serial: Drop the s3c24x0 serial driver
David Müller (ELSOFT AG)
- [U-Boot] u-boot 2016.11 and A33 1G ram detection.
8001010
- [U-Boot] [PATCH] armv8/spin_table.c: fix spin table release address
Tsung-Han Lin
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
Jagan Teki
- [U-Boot] [PATCH v2 3/4] arm: Remove VCMA9 board
Jagan Teki
- [U-Boot] [PATCH v2 4/4] serial: Drop the s3c24x0 serial driver
Jagan Teki
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
Tom Rini
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
Jagan Teki
- [U-Boot] [PATCH v2 2/4] arm: Remove smdk2410 board
Tom Rini
- [U-Boot] Please pull u-boot-fdt
Tom Rini
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PATCH 1/9] ARM: dts: am57xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [PATCH 2/9] board: ti: am57xx: Add support for detection of reva3 variations for GPEVM
Tom Rini
- [U-Boot] [PATCH 3/9] board: ti: am57xx: Add support for detection of X15 revb1
Tom Rini
- [U-Boot] [PATCH 4/9] board: ti: am57xx: Update SR1.1 RGMII0 iodelay timings for x15/GPEVM
Tom Rini
- [U-Boot] [PATCH 5/9] board: ti: am572x: Add pinmux for X15/GPEVM SR2.0 using latest PMT
Tom Rini
- [U-Boot] [PATCH 6/9] board: ti: am572x-idk: Update pinmux using latest PMT
Tom Rini
- [U-Boot] [PATCH 7/9] board: ti: am57xx: Add support for the am571x idk
Tom Rini
- [U-Boot] [PATCH 8/9] ARM: dts: AM571x-IDK Initial Support
Tom Rini
- [U-Boot] [PATCH 9/9] ti_armv7_common: env: Increase IO buffer size
Tom Rini
- [U-Boot] [PATCH v3 1/2] ARM: ti: consolidate dfu environment variables
Tom Rini
- [U-Boot] [PATCH v3 2/2] ARM: am57xx_evm: enable DFU support
Tom Rini
- [U-Boot] [PATCH 01/11] board: ti: dra71x-evm: Add epprom support
Tom Rini
- [U-Boot] [PATCH 02/11] board: ti: dra71x-evm: Add mux settings
Tom Rini
- [U-Boot] [PATCH 03/11] board: ti: dra72: Introduce optimization for rgmii timing for rev C
Tom Rini
- [U-Boot] [PATCH 04/11] board: ti: dra71x-evm: Add PMIC support
Tom Rini
- [U-Boot] [PATCH 05/11] ARM: OMAP4+: Add support for getting pbias info from board
Tom Rini
- [U-Boot] [PATCH 06/11] ARM: dts: dra7xx: sync DT with latest Linux
Tom Rini
- [U-Boot] [PATCH 07/11] ARM: dts: dra71x-evm: Add DT support
Tom Rini
- [U-Boot] [PATCH 08/11] configs: ti_omap5_common: Select dtb name for dra71x
Tom Rini
- [U-Boot] [PATCH 09/11] configs: dra7xx: hs: Enable DM_ETH
Tom Rini
- [U-Boot] [PATCH 10/11] configs: dra7xx: Enable pmic/regulator options
Tom Rini
- [U-Boot] [PATCH 11/11] configs: dra7xx: Enable lp873x options
Tom Rini
- [U-Boot] [PATCH 03/14] mmc: Fix warning if debug() is not used
Tom Rini
- [U-Boot] [PATCH 14/14] mips: jz47xx: Add Creator CI20 platform
Tom Rini
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Tom Rini
- [U-Boot] [PATCH 04/14] serial: 16550: Add getfcr accessor
Tom Rini
- [U-Boot] Please pull u-boot-rockchip (take 2)
Tom Rini
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Marek Vasut
- [U-Boot] [U-Boot,v2,1/6] tests: net: Offset downloads to 4MB
Tom Rini
- [U-Boot] [U-Boot,v2,2/6] Travis: Expose build dir as variable
Tom Rini
- [U-Boot] [U-Boot, v2, 3/6] travis: Add python path for environments
Tom Rini
- [U-Boot] [U-Boot, v2, 4/6] tests: Add efi_loader hello world test
Tom Rini
- [U-Boot] [U-Boot, v2, 6/6] Travis: Remove sleep test from integratorcp_cm926ejs-qemu test
Tom Rini
- [U-Boot] [U-Boot, v3, 5/6] efi_loader: Allow to compile helloworld.efi w/o bundling it
Tom Rini
- [U-Boot] [U-Boot,v2] travis: Add efi_loader grub2 test
Tom Rini
- [U-Boot] [PATCH] tbs2910: Make Ethernet functional again
Soeren Moch
- [U-Boot] [PATCH RESEND] imx-common: hab: fix return value from hab_auth_img
Eric Nelson
- [U-Boot] [PATCH v3 0/9] From Simon:
Simon Glass
- [U-Boot] [PATCH v3 1/9] net: designware: Export various functions/struct to allow subclassing
Simon Glass
- [U-Boot] [PATCH v3 2/9] net: designware: Adjust dw_adjust_link() to return an error
Simon Glass
- [U-Boot] [PATCH v3 3/9] net: designware: Split the link init into a separate function
Simon Glass
- [U-Boot] [PATCH v3 4/9] net: designware: Export the operation functions
Simon Glass
- [U-Boot] [PATCH v3 5/9] net: gmac_rk3288: Add RK3288 GMAC driver
Simon Glass
- [U-Boot] [PATCH v3 6/9] rockchip: Enable networking support on rock2 and firefly
Simon Glass
- [U-Boot] [PATCH v3 7/9] rockchip: evb-rk3339: Enable DHCP
Simon Glass
- [U-Boot] [PATCH v3 8/9] rockchip: Add PXE and DHCP to the default boot targets
Simon Glass
- [U-Boot] [PATCH v3 9/9] rockchip: Drop Ethernet from the TODO
Simon Glass
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Simon Glass
- [U-Boot] [PATCH 16/19] pinctrl: imx6: support i.MX6SLL
Simon Glass
- [U-Boot] [PATCH v2 4/4] dts: popmetal: add usb host power supply node
Simon Glass
- [U-Boot] [PATCH 00/97] Replace some powerpc CONFIG_* macros to Kconfig options
Simon Glass
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Simon Glass
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] [PATCH] cmd/fdt: fix uncallable systemsetup command
Simon Glass
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Simon Glass
- [U-Boot] About U-boot's TPM
Simon Glass
- [U-Boot] [PATCH v2 2/2] splash: sort include files
Simon Glass
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Simon Glass
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Simon Glass
- [U-Boot] [PATCH 04/14] serial: 16550: Add getfcr accessor
Simon Glass
- [U-Boot] [PATCH 06/14] serial: 16550: Add Ingenic JZ4780 support
Simon Glass
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Simon Glass
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] arch/arm/mach-sunxi/dram_sun8i_a33.c and 1Gb detect as 512Mb on A33.
far5893
- [U-Boot] [PATCH 06/14] serial: 16550: Add Ingenic JZ4780 support
Marek Vasut
- [U-Boot] About U-boot's TPM
Ronny Ko
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Joe Hershberger
- [U-Boot] [PATCH 09/27] sh: Use asm-generic/io.h
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 01/24] sh4: cache: correct dcache flush to invalidate with write-back
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 02/24] sh4: cache: correct flush_cache() to writeback and invalidate
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 03/24] sh3: remove unused cache.c file from being built
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 04/24] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 05/24] sh: cache: don't modify CCR from P1 area
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 06/24] sh4: cache: move exported cache manipulation functions into cache.c
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 07/24] pci: sh7751: fix up PCI I/O space address
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 08/24] pci: sh7751: map PCI memory space into SDRAM
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 09/24] sh4: remove __io config options from r2dplus and r7780mp boards
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 10/24] r2dplus: use P1 area space for text base and PCI system memory
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 11/24] r2dplus: select rtl8139 driver in defconfig
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 12/24] common: sh: add necessary define bits to board_f
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 13/24] sh4: use single u-boot linker script for all boards
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 14/24] sh: place board lowlevel_init code in the beginning of .text
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 15/24] sh: define entry point and reloc_dst inside a linker script
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 16/24] sh: add MEMORY command to a shared linker script
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 17/24] sh: remove undefined DEBUG preprocessor token from board config files
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 18/24] sh: define CONFIG_DISPLAY_BOARDINFO to print board information
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 19/24] sh: add common dram_init() function for all boards
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 20/24] sh: add shared relocate_code() function and call board_init_r()
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 21/24] sh4: fix start.S by calling board_init_f() after first code relocation
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 22/24] sh: share the correct version of start.S among all cpus
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 23/24] sh: generate position independent code for all platforms
Vladimir Zapolskiy
- [U-Boot] [RESEND][PATCH 24/24] r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes
Vladimir Zapolskiy
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
André Przywara
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
André Przywara
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Jaehoon Chung
- [U-Boot] [PATCH 02/14] spl: mmc: Fix build without LIBCOMMON_SUPPORT
Marek Vasut
- [U-Boot] [PATCH 08/14] mmc: Add JZ47xx SD/MMC controller driver
Jaehoon Chung
- [U-Boot] [PATCH v3] mmc: add bkops-enable command
Jaehoon Chung
- [U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped
Jaehoon Chung
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Mirza Krak
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Dongwoo Lee
- [U-Boot] Macronix NOR_SPI and Quad I/O
Chin Liang See
- [U-Boot] [PATCH] imx6: clock: Enable External Memory Interface [EIM] clock (eim_slow_clock)
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped
Minkyu Kang
- [U-Boot] [PATCH] net: zynq_gem: Return 0 on success, not -ENOSYS
Michal Simek
- [U-Boot] [PATCH v2 2/4] serial: zynq: Remove unused index from get uart clock function
Michal Simek
- [U-Boot] [PATCH v2 3/4] mmc: zynq: Determine base clock frequency via clock framework
Michal Simek
- [U-Boot] [PATCH v2 4/4] mmc: zynq: Add fdt max-frequency support
Michal Simek
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Michal Simek
- [U-Boot] [PATCH] sun8i_emac: Fix mdio read sequence
Jagan Teki
- [U-Boot] [PATCH] sunxi: add support for Nintendo NES Classic Edition
Jagan Teki
- [U-Boot] [PATCH v2 0/8] SF: Cadence QSPI driver fixes and clean up
Jagan Teki
- [U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped
Hans de Goede
- [U-Boot] Pull request v3: u-boot-spi/sunxi
Jagan Teki
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Michal Simek
- [U-Boot] [PATCH] arch/arm/lib/Makefile: Allow CONFIG_USE_ARCH_MEMSET/MEMCPY with SPL
Mike Looijmans
- [U-Boot] [PATCH 00/14] [PATCHv4] Retrieve MAC address from EEPROM
Michal Simek
- [U-Boot] [PATCH v5 0/7] toradex: config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v2] tools/env: fix environment alignment tests for block devices
Max Krummenacher
- [U-Boot] [PATCHv4] Retrieve MAC address from EEPROM
Igor Grinberg
- [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string
Vignesh R
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Lokesh Vutla
- [U-Boot] [RFC PATCH 1/3] arch: arm: omap: Declare size of ddr very early
Lokesh Vutla
- [U-Boot] [RFC PATCH 2/3] spl: reorder the assignment of board info to global data
Lokesh Vutla
- [U-Boot] [RFC PATCH 3/3] spl: Add support for enabling dcache
Lokesh Vutla
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH] cmd: usb: run 'usb start' when USB is stopped
Jaehoon Chung
- [U-Boot] [PATCH] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Stefan Roese
- [U-Boot] [PATCH v2] tools/env: fix environment alignment tests for block devices
Andreas Fenkart
- [U-Boot] [PATCH 1/4] imx: mx6sx: add dts for mx6sxsabreauto board
Peng Fan
- [U-Boot] [PATCH 2/4] imx: mx6sxsabreauto: enable pinctrl driver
Peng Fan
- [U-Boot] [PATCH 3/4] imx: dts: mx6sxsabreauto: enable i2c2/3
Peng Fan
- [U-Boot] [PATCH 4/4] imx: mx6sxsabreauto: enable more dm drivers
Peng Fan
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] Macronix NOR_SPI and Quad I/O
Champ, Andy
- [U-Boot] [PATCH 0/4] env_sf: minor cleanup
Andreas Fenkart
- [U-Boot] [PATCH 1/4] env_sf: factor out prepare_flash_device
Andreas Fenkart
- [U-Boot] [PATCH 2/4] enf_sf: reuse setup_flash_device instead of open coding it
Andreas Fenkart
- [U-Boot] [PATCH 3/4] env_sf: re-order error handling in single-buffer env_relocate_spec
Andreas Fenkart
- [U-Boot] [PATCH 4/4] env_sf: use DIV_ROUND_UP to calculate number of sectors to erase
Andreas Fenkart
- [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string
Jagan Teki
- [U-Boot] [PATCH v3] mmc: add bkops-enable command
Tomas Melin
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH] net: zynq_gem: Return 0 on success, not -ENOSYS
Olliver Schinagl
- [U-Boot] [PATCHv4] Retrieve MAC address from EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Olliver Schinagl
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Michal Simek
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Olliver Schinagl
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Michal Simek
- [U-Boot] [PATCHv4] Retrieve MAC address from EEPROM
Igor Grinberg
- [U-Boot] [PATCH RESEND] imx-common: hab: fix return value from hab_auth_img
Eric Nelson
- [U-Boot] [PATCH 12/15 v2] pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Maxime Ripard
- [U-Boot] [PATCH] usb: xhci: Limit transfer length in a single TD
Marek Vasut
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH v2 7/8] spi: cadence_qspi: Fix CS timings
See, Chin Liang
- [U-Boot] [PATCH v2 0/8] SF: Cadence QSPI driver fixes and clean up
Marek Vasut
- [U-Boot] [PATCH v2] tools/env: fix environment alignment tests for block devices
Max Krummenacher
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Hans de Goede
- [U-Boot] [PATCH v2 0/8] SF: Cadence QSPI driver fixes and clean up
Jagan Teki
- [U-Boot] [PATCH v2 8/8] spi: cadence_qspi: Support specifying the sample edge used
See, Chin Liang
- [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Fabien Parent
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
See, Chin Liang
- [U-Boot] [Resend RFC PATCH v1 0/3] GPT over MTD
Patrick DELAUNAY
- [U-Boot] [PATCH v2 2/4] davinci: omapl138_lcdk: configure ddr2
Tom Rini
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Patrick DELAUNAY
- [U-Boot] Macronix NOR_SPI and Quad I/O
Bacrau, Dumitru
- [U-Boot] Macronix NOR_SPI and Quad I/O
Champ, Andy
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Tom Rini
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Tom Rini
- [U-Boot] [PATCH 1/5] davinci: omapl138_lcdk: fixup mac address in dtb
Tom Rini
- [U-Boot] [RFC PATCH 1/3] arch: arm: omap: Declare size of ddr very early
Tom Rini
- [U-Boot] [RFC PATCH 2/3] spl: reorder the assignment of board info to global data
Tom Rini
- [U-Boot] [RFC PATCH 3/3] spl: Add support for enabling dcache
Tom Rini
- [U-Boot] [PATCH 2/5] davinci: omapl138_lcdk: improve readability of boot command
Tom Rini
- [U-Boot] [PATCH 3/5] davinci: omapl138_lcdk: add DT support for EMMC boot
Tom Rini
- [U-Boot] [PATCH] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Jeremy Linton
- [U-Boot] [PATCH v4 0/6] Add ARMv8 PSCI framework
york sun
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] Macronix NOR_SPI and Quad I/O
Bacrau, Dumitru
- [U-Boot] [PATCH 4/5] davinci: omapl138_lcdk: do fdt systemsetup when loading DT
Tom Rini
- [U-Boot] Macronix NOR_SPI and Quad I/O
Champ, Andy
- [U-Boot] [U-Boot, 3/8] spl: Move the loading code into its own function
Tom Rini
- [U-Boot] [U-Boot, 3/8] spl: Move the loading code into its own function
Simon Glass
- [U-Boot] static var mem alignment issue/question
Tim Harvey
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Simon Glass
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Simon Glass
- [U-Boot] [PATCH 08/14] mmc: Add JZ47xx SD/MMC controller driver
Marek Vasut
- [U-Boot] [PATCH] arch: powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [U-Boot,v2] timer: Support clocks via phandle
Tom Rini
- [U-Boot] Pull request v3: u-boot-spi/sunxi
Tom Rini
- [U-Boot] spl: add check for FIT-header when loading image
Tom Rini
- [U-Boot] spl: remove redundant call to parse_image_header()
Tom Rini
- [U-Boot] [U-Boot, v5, 1/7] Revert "generic-board: allow showing custom board info"
Tom Rini
- [U-Boot] [U-Boot, v5, 2/7] generic-board: make show_board_info a weak function
Tom Rini
- [U-Boot] [U-Boot, v5, 3/7] apalis/colibri_t20/t30: deactivate displaying board info
Tom Rini
- [U-Boot] [U-Boot,v5,4/7] toradex: config block handling
Tom Rini
- [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes
Vladimir Zapolskiy
- [U-Boot] [U-Boot, v5, 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
Tom Rini
- [U-Boot] [U-Boot, v5, 6/7] apalis/colibri_t30: move environment location
Tom Rini
- [U-Boot] [U-Boot, v5, 7/7] colibri_vf: usb gadget: toradex pid is now set generically
Tom Rini
- [U-Boot] linux/compat.h: Properly implement ndelay fallback
Tom Rini
- [U-Boot] bootcounter_ram: Fix misaligned cache warning
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] keystone2: Move target selection to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] ti_armv7_keystone2: env: Add NFS loading support for PMMC and MON
Tom Rini
- [U-Boot] tools/Makefile: suppress "which swig" error output
Tom Rini
- [U-Boot] [U-Boot, v2] tools/env: fix environment alignment tests for block devices
Tom Rini
- [U-Boot] sata: fix sata command can not being executed bug
Tom Rini
- [U-Boot] xyz-modem: Change getc timeout loop waiting
Tom Rini
- [U-Boot] README: fix typo FAT_ENV_DEV_AND_PART
Tom Rini
- [U-Boot] [U-Boot, v4, 1/3] spl: add RAM boot device only if it is actually defined
Tom Rini
- [U-Boot] [U-Boot, v4, 2/3] spl: dfu: move DFU Kconfig to SPL Kconfig
Tom Rini
- [U-Boot] [U-Boot,v4,3/3] spl: add USB Gadget config option
Tom Rini
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
André Przywara
- [U-Boot] [RESEND][PATCH 00/24] sh: add generic board support and fixes
Tom Rini
- [U-Boot] [PATCH v4 0/6] Add ARMv8 PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH] powerpc: Retain compatible property for L2 cache
Chris Packham
- [U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support
Yao Yuan
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] Query on qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH] Add RTC chip pcf2127 support
Meng Yi
- [U-Boot] [RFC PATCH 0/3] spl: Add D-cache support
Lokesh Vutla
- [U-Boot] [PATCH] configs: am43x: hs: Modify SPL load address to fix UART boot issue
Lokesh Vutla
- [U-Boot] [PATCH 0/5] ti_armv7_common: env: Add support for loading FIT images
Lokesh Vutla
- [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
Lokesh Vutla
- [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images
Lokesh Vutla
- [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
Lokesh Vutla
- [U-Boot] [PATCH 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
Lokesh Vutla
- [U-Boot] [PATCH 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
Lokesh Vutla
- [U-Boot] [PATCH] ARM: K2G: DDR3: Fix up priv ID for MPU
Lokesh Vutla
- [U-Boot] [PATCH v2 1/4] usb: dwc2: add support for external vbus supply
Kever Yang
- [U-Boot] [PATCH v2 2/4] board: popmetal: de-assert the host rst pin in board init
Kever Yang
- [U-Boot] [PATCH v2 3/14] bch: Allow to build for the host
Maxime Ripard
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Lukasz Majewski
- [U-Boot] ext4: crash when writing a file
Sébastien Szymanski
- [U-Boot] [PATCH 0/2] ARM: DRA7/AM57xx: Get rid of CONFIG_AM57XX
Lokesh Vutla
- [U-Boot] [PATCH 1/2] usb: xhci: Remove assumption of DWC instance based on DRA7 SoC type
Lokesh Vutla
- [U-Boot] [PATCH 2/2] ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX
Lokesh Vutla
- [U-Boot] [PATCH v2 7/8] spi: cadence_qspi: Fix CS timings
Phil Edworthy
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Heiko Stübner
- [U-Boot] [PATCH v3 7/9] rockchip: evb-rk3339: Enable DHCP
Heiko Stübner
- [U-Boot] [PATCH 1/5] davinci: omapl138_lcdk: fixup mac address in dtb
Fabien Parent
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] [PATCH] armv8: ls2080a: Add serdes1 protocol 0x3b support
Priyanka Jain
- [U-Boot] static var mem alignment issue/question
Måns Rullgård
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] ext4: crash when writing a file
Brüns, Stefan
- [U-Boot] [PATCH] ARM64: zynqmp: Use DTS name for different psu_init_gpl* files in SPL
Michal Simek
- [U-Boot] [PATCH v3 00/11] SF: Cadence QSPI driver fixes and clean up
Phil Edworthy
- [U-Boot] [PATCH v3 01/11] spi: cadence_qspi: Fix clearing of pol/pha bits
Phil Edworthy
- [U-Boot] [PATCH v3 02/11] spi: cadence_qspi: Fix baud rate calculation
Phil Edworthy
- [U-Boot] [PATCH v3 03/11] spi: cadence_qspi: Better debug information on the SPI clock rate
Phil Edworthy
- [U-Boot] [PATCH v3 04/11] spi: cadence_qspi: Use #define for bits instead of bit shifts
Phil Edworthy
- [U-Boot] [PATCH v3 05/11] spi: cadence_qspi: Clean up the #define names
Phil Edworthy
- [U-Boot] [PATCH v3 06/11] spi: cadence_qspi: Use spi mode at the point it is needed
Phil Edworthy
- [U-Boot] [PATCH v3 07/11] spi: cadence_qspi: Remove returns from end of void functions
Phil Edworthy
- [U-Boot] [PATCH v3 08/11] spi: cadence_qspi: Fix CS timings
Phil Edworthy
- [U-Boot] [PATCH v3 09/11] spi: cadence_qspi: Move DT prop code to match layout
Phil Edworthy
- [U-Boot] [PATCH v3 10/11] spi: cadence_qspi: Change readdata_capture() arg to bool
Phil Edworthy
- [U-Boot] [PATCH v3 11/11] spi: cadence_qspi: Support specifying the sample edge used
Phil Edworthy
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Marek Vasut
- [U-Boot] ext4: crash when writing a file
Sébastien Szymanski
- [U-Boot] [PATCH v3 0/6] davinci: omapl138_lcdk: fix a few bugs for SPL boot
Fabien Parent
- [U-Boot] [PATCH v3 1/6] ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig
Fabien Parent
- [U-Boot] [PATCH v3 2/6] ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig
Fabien Parent
- [U-Boot] [PATCH v3 3/6] davinci: omapl138_lcdk: configure pll0
Fabien Parent
- [U-Boot] [PATCH v3 4/6] davinci: omapl138_lcdk: configure ddr2
Fabien Parent
- [U-Boot] [PATCH v3 5/6] davinci: da850evm: fix empty boot method list in the SPL
Fabien Parent
- [U-Boot] [PATCH v3 6/6] davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot
Fabien Parent
- [U-Boot] [PATCH 0/6] davinci: omapl138_lcdk: add SPL NAND boot support
Fabien Parent
- [U-Boot] [PATCH 1/6] NAND: davinci: add support for NAND chips with 16 bits bus
Fabien Parent
- [U-Boot] [PATCH 2/6] davinci: omapl138_lcdk: use correct define for 16 bit NAND chips
Fabien Parent
- [U-Boot] [PATCH 3/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE
Fabien Parent
- [U-Boot] [PATCH 4/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE
Fabien Parent
- [U-Boot] [PATCH 5/6] davinci: omapl138_lck: remove obsolete define
Fabien Parent
- [U-Boot] [PATCH 6/6] davinci: omapl138_lcdk: add NAND SPL boot support
Fabien Parent
- [U-Boot] [PATCH 1/2] cmd: Convert CMD_BOOTMENU
Tom Rini
- [U-Boot] [PATCH 2/2] Enable DISTRO_DEFAULT on platforms that missed it before
Tom Rini
- [U-Boot] [PATCH 1/5] davinci: omapl138_lcdk: fixup mac address in dtb
Tom Rini
- [U-Boot] static var mem alignment issue/question
Tim Harvey
- [U-Boot] static var mem alignment issue/question
Måns Rullgård
- [U-Boot] ext4: crash when writing a file
Brüns, Stefan
- [U-Boot] [PATCH] MAINTAINERS: socfpga: update email address for Dinh Nguyen
Dinh Nguyen
- [U-Boot] [PATCH v6] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Christoph Fritz
- [U-Boot] [PATCH v6] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Stefano Babic
- [U-Boot] ext4: crash when writing a file
Sébastien Szymanski
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH 01/14] net: cosmetic: Do not use magic values for ARP_HLEN
Olliver Schinagl
- [U-Boot] [PATCH v2 0/2] davinci: omapl138_lcdk: load DT when doing EMMC boot
Fabien Parent
- [U-Boot] [PATCH v2 1/2] davinci: omapl138_lcdk: improve readability of boot command
Fabien Parent
- [U-Boot] [PATCH v2 2/2] davinci: omapl138_lcdk: add DT support for EMMC boot
Fabien Parent
- [U-Boot] [PATCH] tbs2910: Make Ethernet functional again
Stefano Babic
- [U-Boot] [PATCH] arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivated
Stefano Babic
- [U-Boot] [PATCH] mx6sx: Add initial support for UDOO Neo Board
Stefano Babic
- [U-Boot] [PATCH] colibri_vf: Read kernel and device tree from static UBI volumes
Stefano Babic
- [U-Boot] [PATCH v2] pwm: imx: increase support up to PWM8 for i.MX6SX
Stefano Babic
- [U-Boot] [PATCH] board: ge: bx50v3: add the PMIC configuration support
Stefano Babic
- [U-Boot] [PATCH] tools: imximage: display DCD block offset, length
Stefano Babic
- [U-Boot] [PATCH v2] arm: mx6: specify SPL padding
Stefano Babic
- [U-Boot] [PATCH v3] imx7: SPI: add suport for SPI flash in mikroBUS slot
Stefano Babic
- [U-Boot] [PATCH v4 1/1] ARM: ts4600: add basic board support
Stefano Babic
- [U-Boot] [PATCH v2 2/2] imx: make ipu's di configurable
Stefano Babic
- [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: add MMC2 boot device detection support in SPL
Stefano Babic
- [U-Boot] [PATCH 0/2] ARM: imx6ul: Support liteSOM and liteBoard
Stefano Babic
- [U-Boot] [PATCH 01/14] net: cosmetic: Do not use magic values for ARP_HLEN
Joe Hershberger
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Olliver Schinagl
- [U-Boot] [PATCH 1/3] image: Add FIT image loadable section custom processing
Andrew F. Davis
- [U-Boot] [PATCH v6] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Marek Vasut
- [U-Boot] [PATCH] spi: Zap mpc52xx_spi.c and config
Tom Rini
- [U-Boot] [U-Boot, 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries
Tom Rini
- [U-Boot] drivers: net: keystone_net: add rgmii link type support when parsing dt
Tom Rini
- [U-Boot] [U-Boot,1/9] gpio: bcm2835: add device tree support
Tom Rini
- [U-Boot] [U-Boot, 2/9] serial: bcm283x_mu: add device tree support
Tom Rini
- [U-Boot] [U-Boot, 3/9] serial: pl01x: expose skip_init platdata option in DT
Tom Rini
- [U-Boot] [U-Boot,4/9] fdt: add dt-bindings for bcm2835
Tom Rini
- [U-Boot] [U-Boot, 5/9] fdt: import bcm283x device tree sources from the linux kernel tree
Tom Rini
- [U-Boot] [U-Boot, 6/9] fdt: adjust bcm283x device tree for u-boot
Tom Rini
- [U-Boot] [U-Boot, 7/9] serial: bcm283x_mu: support disabling after initialization
Tom Rini
- [U-Boot] [U-Boot, 8/9] board: rpi: move uart deactivation to board_init
Tom Rini
- [U-Boot] [U-Boot,9/9] ARM: bcm283x: use OF_CONTROL for bcm283x
Tom Rini
- [U-Boot] [U-Boot, v3, 1/3] ARM: bcm283x: Implement EFI RTS reset_system
Tom Rini
- [U-Boot] [U-Boot, v3, 2/3] bcm2835 video: Map frame buffer as 32bpp
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: socfpga: update email address for Dinh Nguyen
Marek Vasut
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Joe Hershberger
- [U-Boot] [PATCH] travis.yml: Add samsung and rockchip builds
Tom Rini
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Joe Hershberger
- [U-Boot] [PATCH v2 1/7] video: Kconfig: Add VIDEO_IPV3 entry
Stefano Babic
- [U-Boot] [PATCH][v2] net: fman: fix 2.5G SGMII settings
Joe Hershberger
- [U-Boot] [U-Boot, v3, 3/3] bcm2835: Reserve the spin table in efi memory map
Tom Rini
- [U-Boot] vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Tom Rini
- [U-Boot] armv7: psci: cpu_off: flush D-Cache before disable D-Cache
Tom Rini
- [U-Boot] [PATCH 1/5] ti_armv7_common: env: Consolidate support for loading images from mmc
Tom Rini
- [U-Boot] [PATCH 2/5] ti_armv7_common: env: Add support for loading FIT images
Tom Rini
- [U-Boot] [PATCH 3/5] ARM: DRA7: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] [PATCH 4/5] ARM: AM57xx: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] [PATCH 5/5] ARM: AMx3xx: Make FIT boot as default boot on HS devices
Tom Rini
- [U-Boot] [PATCH] ARM: K2G: DDR3: Fix up priv ID for MPU
Tom Rini
- [U-Boot] [PATCH 1/2] usb: xhci: Remove assumption of DWC instance based on DRA7 SoC type
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX
Tom Rini
- [U-Boot] [PATCH v3 1/6] ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig
Tom Rini
- [U-Boot] [PATCH v3 2/6] ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig
Tom Rini
- [U-Boot] [PATCH v3 3/6] davinci: omapl138_lcdk: configure pll0
Tom Rini
- [U-Boot] [PATCH v3 4/6] davinci: omapl138_lcdk: configure ddr2
Tom Rini
- [U-Boot] [PATCH 1/6] NAND: davinci: add support for NAND chips with 16 bits bus
Tom Rini
- [U-Boot] [PATCH 2/6] davinci: omapl138_lcdk: use correct define for 16 bit NAND chips
Tom Rini
- [U-Boot] [PATCH 3/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE
Tom Rini
- [U-Boot] [PATCH 4/6] davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE
Tom Rini
- [U-Boot] [PATCH 5/6] davinci: omapl138_lck: remove obsolete define
Tom Rini
- [U-Boot] [PATCH 6/6] davinci: omapl138_lcdk: add NAND SPL boot support
Tom Rini
- [U-Boot] [PATCH 0/6] davinci: omapl138_lcdk: add SPL NAND boot support
Tom Rini
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Tom Rini
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] [PATCH] SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR
Marek Vasut
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Michal Simek
- [U-Boot] [PATCH 03/12] net: e1000: fix indentation
Joe Hershberger
- [U-Boot] [PATCH 05/12] net: rtl8169: remove unneeded definition
Joe Hershberger
- [U-Boot] [PATCH v2 0/6] Add FIT loadable custom processing
Andrew F. Davis
- [U-Boot] [PATCH v2 1/6] image: Add FIT image loadable section custom processing
Andrew F. Davis
- [U-Boot] [PATCH v2 2/6] image: Add Trusted Execution Environment image type
Andrew F. Davis
- [U-Boot] [PATCH v2 3/6] arm: omap5: add function to make an SMC call on cpu1
Andrew F. Davis
- [U-Boot] [PATCH v2 4/6] arm: omap5: Add TEE loading support
Andrew F. Davis
- [U-Boot] [PATCH v2 5/6] board: ti: dra7xx: add FIT image TEE processing
Andrew F. Davis
- [U-Boot] [PATCH v2 6/6] board: ti: am57xx: add FIT image TEE processing
Andrew F. Davis
- [U-Boot] [RFC PATCH v2 2/7] net: dm: Ignore unknown env_op_* constants
Joe Hershberger
- [U-Boot] [PATCH] net/phy/vitesse: Rework RGMII skew configuration for VSC8601
Joe Hershberger
- [U-Boot] [PATCH] net: usb: r8152: Use ALLOC_CACHE_ALIGN_BUFFER() to allocate the buffers
Joe Hershberger
- [U-Boot] [PATCH 07/12] usb: eth: r8152_fw: fix indentation
Joe Hershberger
- [U-Boot] [PATCH v2 3/6] arm: omap5: add function to make an SMC call on cpu1
Tom Rini
- [U-Boot] [PATCH v2 5/6] board: ti: dra7xx: add FIT image TEE processing
Tom Rini
- [U-Boot] [PATCH v2 4/6] arm: omap5: Add TEE loading support
Tom Rini
- [U-Boot] [PATCH v2 6/6] board: ti: am57xx: add FIT image TEE processing
Tom Rini
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Maxime Ripard
- [U-Boot] [PATCH v4 2/6] ARMv8: Enable SMC instruction
york sun
- [U-Boot] [PATCH v4 3/6] ARMv8: Add secure sections for PSCI text and data
york sun
- [U-Boot] [PATCH v2 4/6] arm: omap5: Add TEE loading support
Andrew F. Davis
- [U-Boot] [PATCH v4 3/6] ARMv8: Add secure sections for PSCI text and data
york sun
- [U-Boot] [PATCH v4 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
york sun
- [U-Boot] [PATCH] cmd: move CMD_PXE to Kconfig
Tom Rini
- [U-Boot] [PATCH v2 4/6] arm: omap5: Add TEE loading support
Tom Rini
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Tom Rini
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Maxime Ripard
- [U-Boot] [PATCH 1/2] Add-MSCC-Phys-VSC8530-VSC8531-VSC8540-VSC8541
Joe Hershberger
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Simon Glass
- [U-Boot] [PATCH v2 1/2] splash: add support for loading splash from a FIT image
Simon Glass
- [U-Boot] About U-boot's TPM
Simon Glass
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Simon Glass
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Simon Glass
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Simon Glass
- [U-Boot] [PATCHv2 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol
york sun
- [U-Boot] [PATCH v4 0/6] Add ARMv8 PSCI framework
york sun
- [U-Boot] [PATCH v3 2/9] net: designware: Adjust dw_adjust_link() to return an error
Joe Hershberger
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Heiko Stübner
- [U-Boot] Please pull u-boot-mpc85xx master
york sun
- [U-Boot] [PATCH 01/11] net: dw: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Tom Rini
- [U-Boot] [PATCH v3 1/9] net: designware: Export various functions/struct to allow subclassing
Joe Hershberger
- [U-Boot] [PATCH v3 3/9] net: designware: Split the link init into a separate function
Joe Hershberger
- [U-Boot] [PATCH v3 4/9] net: designware: Export the operation functions
Joe Hershberger
- [U-Boot] [PATCH v3 0/7] Add FIT loadable custom processing
Andrew F. Davis
- [U-Boot] [PATCH v3 1/7] image: Add FIT image loadable section custom processing
Andrew F. Davis
- [U-Boot] [PATCH v3 2/7] image: Add Trusted Execution Environment image type
Andrew F. Davis
- [U-Boot] [PATCH v3 3/7] arm: omap5: Add function to make an SMC call on cpu1
Andrew F. Davis
- [U-Boot] [PATCH v3 4/7] arm: omap5: Add TEE loading support
Andrew F. Davis
- [U-Boot] [PATCH v3 5/7] arm: omap5: Add OPTEE node to fdt
Andrew F. Davis
- [U-Boot] [PATCH v3 6/7] board: ti: dra7xx: add FIT image TEE processing
Andrew F. Davis
- [U-Boot] [PATCH v3 7/7] board: ti: am57xx: add FIT image TEE processing
Andrew F. Davis
- [U-Boot] [PATCH v3 5/9] net: gmac_rk3288: Add RK3288 GMAC driver
Joe Hershberger
- [U-Boot] [PATCH v3 5/9] ARM: stm32: use clock setup function defined in clock.c
Joe Hershberger
- [U-Boot] Rockchip RK3288 u-boot with mainline kernel
Rick Bronson
- [U-Boot] [PATCH 03/17] net: phy: Support Marvell 88E1680
Joe Hershberger
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Joe Hershberger
- [U-Boot] [RFC PATCH] common: miiphyutil: Work and report phy address in hex in mdio cmd
Joe Hershberger
- [U-Boot] [PATCH resend v3 2/6] drivers: usb: gadget: ether: access network_started using local variable
Joe Hershberger
- [U-Boot] [PATCH 1/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH v3 0/9] From Simon:
Heiko Stübner
- [U-Boot] [PATCH resend v3 6/6] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Joe Hershberger
- [U-Boot] [PATCH resend v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Joe Hershberger
- [U-Boot] [PATCH resend v3 3/6] drivers: usb: gadget: ether: consolidate global devices to single struct
Joe Hershberger
- [U-Boot] [PATCH resend v3 4/6] drivers: usb: gadget: ether: use net device priv to pass usb ether priv
Joe Hershberger
- [U-Boot] [PATCH resend v3 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration
Joe Hershberger
- [U-Boot] [PATCH 05/24] SPL: tiny-printf: add "l" modifier
Simon Glass
- [U-Boot] [PATCH v2 6/7] dm: Add support for scsi/sata based devices
Simon Glass
- [U-Boot] [PATCH v2 7/7] block: Move ceva driver to DM
Simon Glass
- [U-Boot] [PATCH 07/14] mmc: Tinification of the mmc code
Simon Glass
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Simon Glass
- [U-Boot] [RESEND][PATCH 02/24] sh4: cache: correct flush_cache() to writeback and invalidate
Simon Glass
- [U-Boot] [RESEND][PATCH 03/24] sh3: remove unused cache.c file from being built
Simon Glass
- [U-Boot] [RESEND][PATCH 04/24] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h
Simon Glass
- [U-Boot] [RESEND][PATCH 06/24] sh4: cache: move exported cache manipulation functions into cache.c
Simon Glass
- [U-Boot] [RESEND][PATCH 09/24] sh4: remove __io config options from r2dplus and r7780mp boards
Simon Glass
- [U-Boot] [RESEND][PATCH 10/24] r2dplus: use P1 area space for text base and PCI system memory
Simon Glass
- [U-Boot] [RESEND][PATCH 11/24] r2dplus: select rtl8139 driver in defconfig
Simon Glass
- [U-Boot] [RESEND][PATCH 13/24] sh4: use single u-boot linker script for all boards
Simon Glass
- [U-Boot] [RESEND][PATCH 15/24] sh: define entry point and reloc_dst inside a linker script
Simon Glass
- [U-Boot] [RESEND][PATCH 14/24] sh: place board lowlevel_init code in the beginning of .text
Simon Glass
- [U-Boot] [RESEND][PATCH 16/24] sh: add MEMORY command to a shared linker script
Simon Glass
- [U-Boot] [RESEND][PATCH 17/24] sh: remove undefined DEBUG preprocessor token from board config files
Simon Glass
- [U-Boot] [RESEND][PATCH 18/24] sh: define CONFIG_DISPLAY_BOARDINFO to print board information
Simon Glass
- [U-Boot] [RESEND][PATCH 19/24] sh: add common dram_init() function for all boards
Simon Glass
- [U-Boot] [RESEND][PATCH 20/24] sh: add shared relocate_code() function and call board_init_r()
Simon Glass
- [U-Boot] [RESEND][PATCH 21/24] sh4: fix start.S by calling board_init_f() after first code relocation
Simon Glass
- [U-Boot] [RESEND][PATCH 22/24] sh: share the correct version of start.S among all cpus
Simon Glass
- [U-Boot] [PATCH 1/4] env_sf: factor out prepare_flash_device
Simon Glass
- [U-Boot] [PATCH 3/4] env_sf: re-order error handling in single-buffer env_relocate_spec
Simon Glass
- [U-Boot] [RFC PATCH 2/3] spl: reorder the assignment of board info to global data
Simon Glass
- [U-Boot] [RFC PATCH 3/3] spl: Add support for enabling dcache
Simon Glass
- [U-Boot] [PATCH] Add RTC chip pcf2127 support
Simon Glass
- [U-Boot] [PATCH v2 2/4] board: popmetal: de-assert the host rst pin in board init
Simon Glass
- [U-Boot] [PATCH v3 1/9] ARM: DTS: stm32: add stm32f746 device tree pin control files
Vikas MANOCHA
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] [PATCH 07/14] mmc: Tinification of the mmc code
Marek Vasut
- [U-Boot] [PATCH v2 1/4] usb: dwc2: add support for external vbus supply
Marek Vasut
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Simon Glass
- [U-Boot] [PATCH 07/14] mmc: Tinification of the mmc code
Simon Glass
- [U-Boot] [PATCH v6 00/13] binman: A tool for creating firmware images
Simon Glass
- [U-Boot] [PATCH resend v3 0/6] DM conversion of usb ether gadget
Simon Glass
- [U-Boot] [PATCH] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Simon Glass
- [U-Boot] [PATCH] fsl/usb: enable the errata-a005697 for ls1012a
Jerry Huang
- [U-Boot] [PATCH] Add RTC chip pcf2127 support
Meng Yi
- [U-Boot] [PATCH 07/14] mmc: Tinification of the mmc code
Tom Rini
- [U-Boot] [coreboot] Any one have a experence the coreboot with u-boot?
Simon Glass
- [U-Boot] [PATCH v3 0/9] From Simon:
Simon Glass
- [U-Boot] [PATCH v3] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] [PATCH v3 4/7] arm: omap5: Add TEE loading support
Tom Rini
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Simon Glass
- [U-Boot] [PATCH v2 10/22] spi: Add error checking for invalid bus widths
Simon Glass
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
Yao Yuan
- [U-Boot] [PATCH 05/14] serial: 16550: Add port type as driver data
Marek Vasut
- [U-Boot] [PATCH v2] armv8: QSPI: Add AHB bus 16MB+ size support
Yuan Yao
- [U-Boot] [PATCH v2] ls1021a: QSPI: update the node for QSPI support
Yuan Yao
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Stephen Warren
- [U-Boot] [PATCH v2] spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R
- [U-Boot] [PATCH v5 10/13] tegra: Use a U-Boot-specific .dtsi file
Stephen Warren
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Stephen Warren
- [U-Boot] [PATCH v2] travis: Add efi_loader grub2 test
Stephen Warren
- [U-Boot] [PATCH v3 04/11] spi: cadence_qspi: Use #define for bits instead of bit shifts
Jagan Teki
- [U-Boot] [PATCH] fsl/usb: enable the errata-a005697 for ls1012a
york sun
- [U-Boot] [PATCH v3 1/6] drivers: usb: gadget: ether: adopt to usb driver model
Mugunthan V N
- [U-Boot] [PATCH resend v3 6/6] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model
Mugunthan V N
- [U-Boot] [PATCH] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Stefan Roese
- [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support
Mike Looijmans
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_size_index() to retrieve addr and size
Stefan Roese
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Mirza Krak
- [U-Boot] [PATCH v3 04/11] spi: cadence_qspi: Use #define for bits instead of bit shifts
Phil Edworthy
- [U-Boot] [PATCH v2] rtc: Add RTC chip pcf2127 support
Meng Yi
- [U-Boot] [PATCH v3 0/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH v3 1/1] cmd: pci: add option to parse and display BAR information
yehuday at marvell.com
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Olliver Schinagl
- [U-Boot] [PATCHv3 09/15] pci: layerscape: add pci driver based on DM
Z.Q. Hou
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Olliver Schinagl
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Michal Simek
- [U-Boot] [PATCHv2 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol
Z.Q. Hou
- [U-Boot] [PATCH v6] mx6sx: Add initial support for Samtec VIN|ING 2000 board
Stefano Babic
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Marcel Ziswiler
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
maxime.ripard at free-electrons.com
- [U-Boot] [PATCH 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH] configs: omap5_uevm_defconfig: Enable LPAE mode
Keerthy
- [U-Boot] [PATCH] am57xx: Set tps659038 PMIC GPIO7 pad mux value to POWERHOLD
Keerthy
- [U-Boot] [PATCH v4 0/6] Add ARMv8 PSCI framework
Hongbo Zhang
- [U-Boot] [PATCH v4 2/6] ARMv8: Enable SMC instruction
Hongbo Zhang
- [U-Boot] [PATCH v4 3/6] ARMv8: Add secure sections for PSCI text and data
Hongbo Zhang
- [U-Boot] [PATCH v4 6/6] ARMv8: LS1043A: Enable LS1043A default PSCI support
Hongbo Zhang
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Bernhard Nortmann
- [U-Boot] [PATCH v2 7/7] block: Move ceva driver to DM
Michal Simek
- [U-Boot] [PATCH] disk: convert to Kconfig
Patrick Delaunay
- [U-Boot] [Resend RFC PATCH v1 1/3] add support of GPT partitioning over MTD
Patrick DELAUNAY
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Olliver Schinagl
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Hans de Goede
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [RFC PATCH v2 0/8] GPT over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 1/8] uuid: add function for GUID string parsing
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 2/8] disk: part: refactor to prepare GPT over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 3/8] disk: part: add support of GPT partitioning over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 4/8] cmd: gpt: update command to support GPT over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 5/8] cmd: part: update command to support GPT over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 6/8] cmd: mtdparts: update command to support GPT over MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 7/8] uuid: remove dependency with io.h
Patrick Delaunay
- [U-Boot] [RFC PATCH v2 8/8] sandbox: GPT over MTD test
Patrick Delaunay
- [U-Boot] uefi: x86: uboot as uefi payload
Markus Valentin
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible
Vignesh R
- [U-Boot] [PATCH v3 0/9] From Simon:
Heiko Stübner
- [U-Boot] [PATCH] Revert "ARM: mx6: add MMC2 boot device detection support in SPL"
Breno Lima
- [U-Boot] [PATCH v2] rtc: Add RTC chip pcf2127 support
Fabio Estevam
- [U-Boot] [PATCH] spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible
Marek Vasut
- [U-Boot] [PATCH v2 6/7] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] Please assign custodian for: u-boot-pmic / maintainers for: Samsung boards
Przemyslaw Marczak
- [U-Boot] [PATCH] video: cfb_console: fix hang if splashimage file is missing
Anatolij Gustschin
- [U-Boot] [PATCH] travis.yml: Add samsung and rockchip builds
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [PATCH v3 5/7] arm: omap5: Add OPTEE node to fdt
Tom Rini
- [U-Boot] [PATCH 01/14] mips: Let cache.h be included from assembly source
Daniel Schwierzeck
- [U-Boot] [PATCH 02/23] MIPS: Use ram_top, not bi_memsize, in arch_lmb_reserve
Daniel Schwierzeck
- [U-Boot] [PATCH 03/23] MIPS: Fix map_physmem for cached mappings
Daniel Schwierzeck
- [U-Boot] [PATCH] disk: convert to Kconfig
Tom Rini
- [U-Boot] [PATCH v4 2/6] ARMv8: Enable SMC instruction
york sun
- [U-Boot] [PATCH 0/5] arm: tegra: apalis-tk1, mmc and ext clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH 1/5] arm: tegra: initial support for apalis tk1
Marcel Ziswiler
- [U-Boot] [PATCH 2/5] mmc: tegra: introduce CONFIG_TEGRA_MMC to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH 3/5] mmc: tegra: move CONFIG_TEGRA_MMC from headers to defconfigs
Marcel Ziswiler
- [U-Boot] [PATCH 4/5] mmc: tegra: allow disabling external clock loopback
Marcel Ziswiler
- [U-Boot] [PATCH 5/5] apalis-tk1: disable external clock loopback on SDMMC3
Marcel Ziswiler
- [U-Boot] [PATCHv2 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol
york sun
- [U-Boot] [PATCH] disk: convert to Kconfig
Patrick DELAUNAY
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Breno Lima
- [U-Boot] [PATCH] powerpc: Retain compatible property for L2 cache
york sun
- [U-Boot] [PATCH] imx_common: spl: Fix SPL boot from SD card
Fabio Estevam
- [U-Boot] [PATCH 1/1] rpi: set serial port clock to 48 MHz
Stephen Warren
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH v2] board/ls2088ardb: set rear fan speed to reduce noise
york sun
- [U-Boot] arm, Makefile: set SPL_PAYLOAD according to the SoC architecture
york sun
- [U-Boot] [PATCH v2] armv8: QSPI: Add AHB bus 16MB+ size support
york sun
- [U-Boot] [PATCH 0/2] arm: imx: add boards apalis imx6, colibri imx6
Max Krummenacher
- [U-Boot] [PATCH 1/2] arm: imx: initial support for apalis imx6
Max Krummenacher
- [U-Boot] [PATCH 2/2] arm: imx: initial support for colibri imx6
Max Krummenacher
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH 2/2] Fix patman alignment issues in Add MSCC PHY:VSC8530/VSC8531/VSC8540/VSC8541
Joe Hershberger
- [U-Boot] [PATCH] travis.yml: Split Freescale ARM job up more
Tom Rini
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Joe Hershberger
- [U-Boot] [PATCH] fsl/usb: enable the errata-a005697 for ls1012a
york sun
- [U-Boot] [PATCH v3 3/9] ARM: stm32: cleanup stm32f7 files
Joe Hershberger
- [U-Boot] [PATCH 02/14] net: cosmetic: Make the MAC address string less magical
Joe Hershberger
- [U-Boot] [PATCH 03/14] net: cosmetic: Define ethernet name length
Joe Hershberger
- [U-Boot] [PATCH] ts4600: Disable CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH 04/14] net: core: Sanitize get/set operations for enetaddr
Joe Hershberger
- [U-Boot] [PATCH 05/14] net: core: cosmetic: A MAC address is not limited to SROM
Joe Hershberger
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 06/14] net: core: Using an ethernet address from ROM is not bad
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt
Simon Glass
- [U-Boot] [PATCH 07/14] net: core: Inform the user of the device MAC address
Joe Hershberger
- [U-Boot] [PATCH] ts4600: Disable CONFIG_DISPLAY_CPUINFO
Sebastien Bourdelin
- [U-Boot] [PATCH 08/14] net: core: Add function to check/set MAC locality
Joe Hershberger
- [U-Boot] Travis CI
york sun
- [U-Boot] [PATCH v3 0/9] From Simon:
Heiko Stübner
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Joe Hershberger
- [U-Boot] [PATCH 09/14] net: Add ability to set MAC address via EEPROM
Joe Hershberger
- [U-Boot] [PATCH 10/14] fdt: fixup_eth: Remove code duplication with a function
Joe Hershberger
- [U-Boot] [PATCH 11/14] fdt: eth_fixup: improve error catching/reduce identation
Joe Hershberger
- [U-Boot] [PATCH 14/14] tools: Add tool to add crc8 to a mac address
Joe Hershberger
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Joe Hershberger
- [U-Boot] [PATCH 12/14] fdt: eth_fixup: Add hook for board to override MAC
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: dw: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH v1 1/5] common: scsi: Remove completely unused functions
Michal Simek
- [U-Boot] [PATCH v1 2/5] common: scsi: Make private functions static
Michal Simek
- [U-Boot] [PATCH v1 3/5] cmd: scsi: Make private functions static
Michal Simek
- [U-Boot] [PATCH v1 4/5] scsi: Change scsi_scan() to be able to return value
Michal Simek
- [U-Boot] [PATCH v1 5/5] scsi: Separate SCSI private block description initialization
Michal Simek
- [U-Boot] [PATCH v3 1/2] dm: Add support for scsi/sata based devices
Michal Simek
- [U-Boot] [PATCH v3 2/2] block: Move ceva driver to DM
Michal Simek
- [U-Boot] [RFC PATCH v2 4/7] env: Introduce "transient" and "system" access flags
Joe Hershberger
- [U-Boot] [PATCH 2/6] net: sunxi-emac: Write HW address via function
Joe Hershberger
- [U-Boot] [PATCH 2/4 v3] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
york sun
- [U-Boot] [PATCH 2/4 v3] fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
york sun
- [U-Boot] [PATCH 3/6] net: sunxi-emac: Add write_hwaddr net_op hook
Joe Hershberger
- [U-Boot] [PATCH 4/6] net: sunxi-emac: Add read_rom_hwaddr net_op hook
Joe Hershberger
- [U-Boot] Travis CI
Stephen Warren
- [U-Boot] [PATCH 5/6] arm: sunxi: Use board hooks to obtain MAC address
Joe Hershberger
- [U-Boot] [PATCH 6/6] net: sunxi: Enable eeprom on OLinuXino Lime boards
Joe Hershberger
- [U-Boot] [PATCH v2 0/6] cleanup and enhancements for Colibri VFxx
Stefan Agner
- [U-Boot] [PATCH v2 1/6] toradex: fix USB Download gadget fixup callback
Stefan Agner
- [U-Boot] [PATCH v2 2/6] toradex: allow custom fdt board setup in board file
Stefan Agner
- [U-Boot] [PATCH v2 3/6] colibri_vf: use device-tree for MTD partitions
Stefan Agner
- [U-Boot] [PATCH v2 4/6] colibri_vf: cleanup USB clock initialization
Stefan Agner
- [U-Boot] [PATCH v2 5/6] colibri_vf: use same NAND clock as Linux uses
Stefan Agner
- [U-Boot] [PATCH v2 6/6] ARM: dts: vf: Fix warning about missing reg property
Stefan Agner
- [U-Boot] Travis CI
york sun
- [U-Boot] [PATCH v2 1/3] net: Kconfig: Add CONFIG_MACB option
Joe Hershberger
- [U-Boot] Travis CI
york sun
- [U-Boot] [PATCH v2 1/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH v2 2/2] common/board_f.c: align m68k arch to use CONFIG_DISPLAY_CPUINFO
Angelo Dureghello
- [U-Boot] [PATCH v2 0/8] spl: Move image loader names into the linker list
Simon Glass
- [U-Boot] [PATCH v2 1/8] spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macro
Simon Glass
- [U-Boot] [PATCH v2 2/8] spl: Add a name to the SPL load-image methods
Simon Glass
- [U-Boot] [PATCH v2 3/8] spl: Move the loading code into its own function
Simon Glass
- [U-Boot] [PATCH v2 4/8] spl: Pass the loader into spl_load_image()
Simon Glass
- [U-Boot] [PATCH v2 5/8] spl: Drop announce_boot_device()
Simon Glass
- [U-Boot] [PATCH v2 6/8] spl: sunxi: Drop spl_board_announce_boot_device()
Simon Glass
- [U-Boot] [PATCH v2 7/8] spl: uniphier: Drop spl_board_announce_boot_device()
Simon Glass
- [U-Boot] [PATCH v2 8/8] spl: sandbox: Drop spl_board_announce_boot_device()
Simon Glass
Last message date:
Wed Nov 30 23:30:56 CET 2016
Archived on: Thu Dec 1 08:10:32 CET 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).