[U-Boot] Please pull u-boot-fsl-qoriq master
york sun
york.sun at nxp.com
Wed Nov 23 20:13:25 CET 2016
Tom,
Let's try again.
The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 020198b0c7d251cf6bde76024ecf0ee711860534:
image-fit: Fix compiling error caused by autoconf.h (2016-11-23
10:40:08 -0800)
----------------------------------------------------------------
Alison Wang (3):
armv8: Support loading 32-bit OS in AArch32 execution state
armv8: fsl-layerscape: SMP support for loading 32-bit OS
armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
Feng Li (1):
armv7: Add support of ls1021a-iot board
Hou Zhiqiang (1):
fsl: serdes: fix a deadloop issue for P4080
Pratiyush Srivastava (1):
armv8:ls1012a: Update bootargs for fast-boot
Priyanka Jain (8):
armv8: ls2080a: Update serdes protocol support
driver: net: ldpaa_eth: Fix missing bracket issue
armv8: lsch3: Add generic get_svr() in assembly
armv8: lsch3: Use SVR based timer base address detection
armv8: fsl-layerscape: Update TZASC registers type
armv8: fsl-layerscape : Check SVR for initializing TZASC
armv8: fsl-layerscape: Add NXP LS2088A SoC support
armv8/fsl-lsch3: Update code to release secondary cores
Shaohui Xie (3):
lpuart: add a get_lpuart_clk function
armv8: ls1046aqds: add lpuart support
armv8: ls2080aqds: fix SGMII repeater settings
Shengzhou Liu (1):
armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
Sriram Dash (1):
powerpc: mpc512x: Add support for get_svr() for mpc512x devices
Thomas Abraham (1):
arm: exynos7420: remove custome low level init function
York Sun (2):
armv7: ls1021aiot: Fixing SPL compiling issues
image-fit: Fix compiling error caused by autoconf.h
Yuan Yao (3):
configs: ls2080ardb: Enable DSPI flash support
arm: ls1021a: improve the core frequency to 1.2GHZ
armv8: fsl-layerscape: Add README for deploying QSPI image
arch/arm/Kconfig | 21 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 13 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.h | 1 +
arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi | 42 +++
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 58 ++++
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 111 +++++--
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 6 +
arch/arm/cpu/armv8/fsl-layerscape/mp.c | 78 ++++-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 13 +-
arch/arm/cpu/armv8/sec_firmware_asm.S | 23 ++
arch/arm/cpu/armv8/start.S | 8 +
arch/arm/cpu/armv8/transition.S | 35 +-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1046a-qds-lpuart.dts | 16 +
arch/arm/dts/fsl-ls1046a-qds.dtsi | 4 +
arch/arm/dts/fsl-ls1046a.dtsi | 54 +++
arch/arm/dts/ls1021a-iot-duart.dts | 16 +
arch/arm/dts/ls1021a-iot.dtsi | 103 ++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 +-
arch/arm/include/asm/arch-fsl-layerscape/mp.h | 6 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 12 +-
arch/arm/include/asm/macro.h | 176 +++++++---
arch/arm/include/asm/system.h | 121 ++++++-
arch/arm/lib/bootm.c | 45 ++-
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/soc.c | 18 +-
arch/arm/mach-rmobile/lowlevel_init_gen3.S | 9 +-
arch/powerpc/cpu/mpc512x/start.S | 5 +
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 6 +-
board/freescale/ls1021aiot/Kconfig | 15 +
board/freescale/ls1021aiot/MAINTAINERS | 7 +
board/freescale/ls1021aiot/Makefile | 9 +
board/freescale/ls1021aiot/README | 58 ++++
board/freescale/ls1021aiot/dcu.c | 47 +++
board/freescale/ls1021aiot/ls1021aiot.c | 259 +++++++++++++++
board/freescale/ls1021aiot/ls102xa_pbi.cfg | 14 +
board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg | 27 ++
board/freescale/ls1021aiot/psci.S | 28 ++
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 2 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg | 4 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg | 4 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 2 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 2 +-
board/freescale/ls1046aqds/ls1046aqds.c | 18 +
board/freescale/ls2080a/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/README | 12 +-
board/freescale/ls2080aqds/eth.c | 135 +++++++-
board/freescale/ls2080ardb/MAINTAINERS | 2 +-
board/freescale/ls2080ardb/README | 8 +-
cmd/bootefi.c | 23 +-
common/image-fit.c | 19 +-
configs/ls1021aiot_qspi_defconfig | 15 +
configs/ls1021aiot_sdcard_defconfig | 19 ++
configs/ls1046aqds_lpuart_defconfig | 30 ++
drivers/net/ldpaa_eth/ldpaa_eth.c | 3 +-
drivers/serial/serial_lpuart.c | 7 +-
include/configs/exynos7420-common.h | 1 +
include/configs/ls1012a_common.h | 2 +-
include/configs/ls1021aiot.h | 366
+++++++++++++++++++++
include/configs/ls1046aqds.h | 8 +
include/configs/ls2080ardb.h | 1 +
64 files changed, 2025 insertions(+), 145 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
create mode 100644 arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
create mode 100644 arch/arm/dts/ls1021a-iot-duart.dts
create mode 100644 arch/arm/dts/ls1021a-iot.dtsi
create mode 100644 board/freescale/ls1021aiot/Kconfig
create mode 100644 board/freescale/ls1021aiot/MAINTAINERS
create mode 100644 board/freescale/ls1021aiot/Makefile
create mode 100644 board/freescale/ls1021aiot/README
create mode 100644 board/freescale/ls1021aiot/dcu.c
create mode 100644 board/freescale/ls1021aiot/ls1021aiot.c
create mode 100644 board/freescale/ls1021aiot/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021aiot/psci.S
create mode 100644 configs/ls1021aiot_qspi_defconfig
create mode 100644 configs/ls1021aiot_sdcard_defconfig
create mode 100644 configs/ls1046aqds_lpuart_defconfig
create mode 100644 include/configs/ls1021aiot.h
Thanks.
York
More information about the U-Boot
mailing list