[U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again

[Stefano Babic]

On 05/11/2016 17:35, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Mon, Oct 24, 2016 at 10:22 AM, Fabio Estevam <festevam at gmail.com> wrote:
>> From: Fabio Estevam <fabio.estevam at nxp.com>
>>
>> Since commit ce412b79e7255770 ("drivers: net: phy: atheros: add separate
>> config for AR8031") ethernet does not work on mx6sabresd.
>>
>> This commit correctly assigns ar8031_config() as the configuration
>> function for AR8031 in the same way as done in the Linux kernel.
>>
>> However, on mx6sabresd design we need some additional configuration,
>> such as enabling the 125 MHz AR8031 output that needs to be done
>> in the board file.
>>
>> This also aligns with the same method that the kernel performs
>> the AR8031 fixup in arch/arm/mach-imx/mach-imx6q.c.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> 
> This one (and the similar patch for wandboard) is a regression fix, so
> hopefully it can reach 2016.11 release.

I pick it up

Stefano