[U-Boot] [PATCH 06/27] ARM64: zynqmp: Add dcc port to dtsi

[Michal Simek]

Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-zcu102.dts | 5 +++++
 arch/arm/dts/zynqmp.dtsi       | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index 770d98766c73..e7496da23592 100644
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -27,6 +27,7 @@
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		serial2 = &dcc;
 		spi0 = &qspi;
 		usb0 = &usb0;
 	};
@@ -69,6 +70,10 @@
 	status = "okay";
 };
 
+&dcc {
+	status = "okay";
+};
+
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
 	status = "okay";
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index ac17c4723a13..f3f4f88cecfa 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -45,6 +45,12 @@
 		};
 	};
 
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
 	power-domains {
 		compatible = "xlnx,zynqmp-genpd";
 
-- 
1.9.1