[U-Boot] [PATCH] sunxi: move CONFIG_SATAPWR to Kconfig option
Jelle van der Waa
jelle at vdwaa.nl
Wed Nov 23 19:28:16 CET 2016
Introduce a new CONFIG_SATAPWR Kconfig option to replace the
option in CONFIG_SYS_EXTRA_OPTIONS.
Signed-off-by: Jelle van der Waa <jelle at vdwaa.nl>
---
board/sunxi/Kconfig | 7 +++++++
board/sunxi/board.c | 11 ++++++-----
configs/A10-OLinuXino-Lime_defconfig | 3 ++-
configs/A20-OLinuXino-Lime2_defconfig | 3 ++-
configs/A20-OLinuXino-Lime_defconfig | 3 ++-
configs/A20-OLinuXino_MICRO_defconfig | 3 ++-
configs/A20-Olimex-SOM-EVB_defconfig | 3 ++-
configs/Cubieboard2_defconfig | 3 ++-
configs/Cubieboard_defconfig | 3 ++-
configs/Cubietruck_defconfig | 3 ++-
configs/Itead_Ibox_A20_defconfig | 3 ++-
configs/Lamobo_R1_defconfig | 3 ++-
configs/Linksprite_pcDuino3_Nano_defconfig | 3 ++-
configs/Linksprite_pcDuino3_defconfig | 3 ++-
configs/Sinovoip_BPI_M3_defconfig | 2 +-
configs/orangepi_plus_defconfig | 3 ++-
16 files changed, 40 insertions(+), 19 deletions(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index ae2fba1..fe2f7b4 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -667,6 +667,13 @@ config GMAC_TX_DELAY
---help---
Set the GMAC Transmit Clock Delay Chain value.
+config SATAPWR
+ string "power pin for SATA"
+ default ""
+ ---help---
+ Set the power pin for SATA. This takes a string in the format
+ understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config SPL_STACK_R_ADDR
default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || MACH_SUN50I
default 0x2fe00000 if MACH_SUN9I
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5365638..71b1ebf 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -80,7 +80,7 @@ DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
int board_init(void)
{
- __maybe_unused int id_pfr1, ret;
+ __maybe_unused int id_pfr1, ret, pin;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
@@ -117,10 +117,11 @@ int board_init(void)
if (ret)
return ret;
-#ifdef CONFIG_SATAPWR
- gpio_request(CONFIG_SATAPWR, "satapwr");
- gpio_direction_output(CONFIG_SATAPWR, 1);
-#endif
+pin = sunxi_name_to_gpio(CONFIG_SATAPWR);
+if (pin >= 0) {
+ gpio_request(pin, "satapwr");
+ gpio_direction_output(pin, 1);
+}
#ifdef CONFIG_MACPWR
gpio_request(CONFIG_MACPWR, "macpwr");
gpio_direction_output(CONFIG_MACPWR, 1);
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index bb7eaf8..99b5744 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -9,7 +9,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SATAPWR="PC3"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index d48e35d..824fc86 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -9,7 +9,8 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SATAPWR="PC3"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 7c5d84d..2791023 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -7,7 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SATAPWR="PC3"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 9eb5f1b..774099e 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -10,7 +10,8 @@ CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SATAPWR="PB8"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
index 53d800f..139173e 100644
--- a/configs/A20-Olimex-SOM-EVB_defconfig
+++ b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -12,7 +12,8 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SATAPWR="PC3"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 9212a17..17923b7 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -7,7 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SATAPWR="PB8"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index 6e7e741..5595e85 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -7,7 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SATAPWR="PB8"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index 37b60b85..2825646 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -12,7 +12,8 @@ CONFIG_GMAC_TX_DELAY=1
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPH(12)"
+CONFIG_SATAPWR="PH12"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig
index d544d50..2bddab3 100644
--- a/configs/Itead_Ibox_A20_defconfig
+++ b/configs/Itead_Ibox_A20_defconfig
@@ -7,7 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SATAPWR="PB8"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
index 58bc5a2..aaa71bb 100644
--- a/configs/Lamobo_R1_defconfig
+++ b/configs/Lamobo_R1_defconfig
@@ -8,7 +8,8 @@ CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),SATAPWR=SUNXI_GPB(3)"
+CONFIG_SATAPWR="PB3"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23)"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 8cbe9c3..130dfe7 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -9,7 +9,8 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPH(2)"
+CONFIG_SATAPWR="PH2"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 5d155b4..d64f388 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -7,7 +7,8 @@ CONFIG_DRAM_ZQ=122
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_AHCI=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPH(2)"
+CONFIG_SATAPWR="PH2"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index d15ac20..1507950 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -13,7 +13,7 @@ CONFIG_USB1_VBUS_PIN="PD24"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPD(25)"
+CONFIG_SATAPWR="PD25"
CONFIG_CONSOLE_MUX=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
index bf88fef..e536095 100644
--- a/configs/orangepi_plus_defconfig
+++ b/configs/orangepi_plus_defconfig
@@ -9,7 +9,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPG(11),MACPWR=SUNXI_GPD(6)"
+CONFIG_SATAPWR="PG11"
+CONFIG_SYS_EXTRA_OPTIONS="MACPWR=SUNXI_GPD(6)"
CONFIG_CONSOLE_MUX=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
--
2.10.2
More information about the U-Boot
mailing list