[U-Boot] [PATCH 75/97] powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
York Sun
york.sun at nxp.com
Thu Nov 24 08:54:56 CET 2016
Use CONFIG_TARGET_T1040RDB instead.
Signed-off-by: York Sun <york.sun at nxp.com>
---
board/freescale/t104xrdb/eth.c | 2 +-
configs/T1040RDB_NAND_defconfig | 2 +-
configs/T1040RDB_SDCARD_defconfig | 2 +-
configs/T1040RDB_SECURE_BOOT_defconfig | 2 +-
configs/T1040RDB_SPIFLASH_defconfig | 2 +-
configs/T1040RDB_defconfig | 1 -
include/configs/T104xRDB.h | 14 +++++++-------
scripts/config_whitelist.txt | 1 -
8 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index ea9f450..cbce840 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -43,7 +43,7 @@ int board_eth_init(bd_t *bis)
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
case PHY_INTERFACE_MODE_SGMII:
/* T1040RDB & T1040D4RDB only supports SGMII on
* DTSEC3
diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig
index a50eab9..2129bf4 100644
--- a/configs/T1040RDB_NAND_defconfig
+++ b/configs/T1040RDB_NAND_defconfig
@@ -12,7 +12,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig
index b0be4f2..fc74dec 100644
--- a/configs/T1040RDB_SDCARD_defconfig
+++ b/configs/T1040RDB_SDCARD_defconfig
@@ -12,7 +12,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig
index 4b4389b..db5316d 100644
--- a/configs/T1040RDB_SECURE_BOOT_defconfig
+++ b/configs/T1040RDB_SECURE_BOOT_defconfig
@@ -6,7 +6,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT,T1040RDB"
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig
index e630e64..9f05ac3 100644
--- a/configs/T1040RDB_SPIFLASH_defconfig
+++ b/configs/T1040RDB_SPIFLASH_defconfig
@@ -13,7 +13,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig
index 8152ca4..e246c43 100644
--- a/configs/T1040RDB_defconfig
+++ b/configs/T1040RDB_defconfig
@@ -5,7 +5,6 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 89b35be..2553966 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -56,7 +56,7 @@
#define CONFIG_SYS_NAND_U_BOOT_START 0x30000000
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10)
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
#endif
@@ -90,7 +90,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
#endif
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
#endif
@@ -124,7 +124,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
#endif
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
#endif
@@ -758,7 +758,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#endif
#ifdef CONFIG_FMAN_ENET
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_T1042RDB)
#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03
#elif defined(CONFIG_TARGET_T1040D4RDB)
#define CONFIG_SYS_SGMII1_PHY_ADDR 0x01
@@ -777,10 +777,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#endif
/* Enable VSC9953 L2 Switch driver on T1040 SoC */
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
#define CONFIG_VSC9953
#define CONFIG_CMD_ETHSW
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08
#else
@@ -881,7 +881,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define __USB_PHY_TYPE utmi
#define RAMDISKFILE "t104xrdb/ramdisk.uboot"
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
#define FDTFILE "t1040rdb/t1040rdb.dtb"
#elif defined(CONFIG_T1042RDB_PI)
#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb"
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e0ba692..58b7341 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -7828,7 +7828,6 @@ CONFIG_SYS_i2C_FSL
CONFIG_T1023RDB
CONFIG_T1024RDB
CONFIG_T1040QDS
-CONFIG_T1040RDB
CONFIG_T1042D4RDB
CONFIG_T1042RDB
CONFIG_T1042RDB_PI
--
2.7.4
More information about the U-Boot
mailing list