[U-Boot] [PATCH v2 0/8] SF: Cadence QSPI driver fixes and clean up

[Jagan Teki]

On Fri, Nov 25, 2016 at 8:08 PM, Phil Edworthy
<phil.edworthy at renesas.com> wrote:
> This series has fixes, patches to clean the code up, and add support for
> specifying the sampling edge.
>
> Changed in v2:
>   spi: cadence_qspi: Fix baud rate calculation
>   spi: cadence_qspi: Fix CS timings (was "Fix CQSPI_CAL_DELAY calculation")
>   spi: cadence_qspi: Support specifying the sample edge used
>
> Added in v2:
>   spi: cadence_qspi: Better debug information on the SPI clock rate
>
> Phil Edworthy (8):
>   spi: cadence_qspi: Fix clearing of pol/pha bits
>   spi: cadence_qspi: Fix baud rate calculation

Please fix the comment for this patch.

>   spi: cadence_qspi: Better debug information on the SPI clock rate
>   spi: cadence_qspi: Use #define for bits instead of bit shifts

And this one,

>   spi: cadence_qspi: Clean up the #define names
>   spi: cadence_qspi: Remove returns from end of void functions
>   spi: cadence_qspi: Fix CS timings
>   spi: cadence_qspi: Support specifying the sample edge used

All look OK, expect above two.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.