[U-Boot] [PATCH v2 07/63] spl: Allow timer drivers to be used in SPL

[Simon Glass]

Add a new Kconfig option to allow timer drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2: None

 common/spl/Kconfig | 9 +++++++++
 drivers/Makefile   | 1 +
 2 files changed, 10 insertions(+)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index f4dcc4e..8b3bce9 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -494,6 +494,15 @@ config SPL_SPI_SUPPORT
 	  enable SPI drivers that are needed for other purposes also, such
 	  as a SPI PMIC.
 
+config SPL_TIMER_SUPPORT
+	bool "Support timer drivers"
+	depends on SPL
+	help
+	  Enable support for timer drivers in SPL. These can be used to get
+	  a timer value when in SPL, or perhaps for implementing a delay
+	  function. This enables the drivers in drivers/timer as part of an
+	  SPL build.
+
 config SPL_USBETH_SUPPORT
 	bool "Support USB Ethernet drivers"
 	depends on SPL
diff --git a/drivers/Makefile b/drivers/Makefile
index e5b443e..4faa284 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
 obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
+obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
-- 
2.8.0.rc3.226.g39d4020