[U-Boot] [PATCH v2] armv8: fsl-layerscape: Add Readme for deploy QSPI image

[Yao Yuan]

On 11/09/2016 02:10 AM, York Sun wrote:
> On 11/07/2016 09:44 PM, Yao Yuan wrote:
> > On 11/08/2016 12:46 PM, York Sun wrote:
> >> On 11/07/2016 07:52 PM, Yuan Yao wrote:
> >>> From: Yuan Yao <yao.yuan at nxp.com>
> >>>
> >>> Signed-off-by: Yuan Yao <yao.yuan at nxp.com>
> >>> ---
> >>> Changed in v2:
> >>> 	Move the readme for QSPI deploy out of only for ls2080aqds.
> >>> ---
> >>>  .../arm/cpu/armv8/fsl-layerscape/doc/README.deploy | 44
> >>> ++++++++++++++++++++++
> >>>  1 file changed, 44 insertions(+)
> >>>  create mode 100644
> >>> arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> >>>
> >>> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> >>> b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> >>> new file mode 100644
> >>> index 0000000..25813b3
> >>> --- /dev/null
> >>> +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy
> >>> @@ -0,0 +1,44 @@
> >>> +Boot source support Overview
> >>> +-------------------
> >>> +	1. LS1043A
> >>> +		LS1043AQDS:QSPI, SD, NOR, NAND
> >>> +		LS1043ARDB:SD, NOR, NAND
> >>> +	2. LS2080A
> >>> +		LS2080AQDS:QSPI, SD, NOR, NAND
> >>> +		LS2080ARDB:NOR, NAND
> >>> +	3. LS1012A
> >>> +		LS1012AQDS:QSPI
> >>> +		LS1012ARDB:QSPI
> >>> +	4. LS1046A
> >>> +		LS1046AQDS:QSPI, SD, NOR, NAND
> >>> +		LS1046ARDB:QSPI, SD
> >>> +
> >>
> >> If you plan to add all SD/NAND/QSPI into this document, it is OK to
> >> call it README.deploy. Otherwise it may be better to name as README.qspi.
> >>
> > I'm not be familiar with SD/NAND boot. So should I rename as README.qspi?
> > Or just keep it but waiting for some others to add SD/NAND boot in another
> patch?
> >
> 
> We already have NAND boot explained in other document. Stick with the
> procedure you are trying to explain. Keep it simple and we can expand it when
> necessary.
> York
 
Get it.
I will send v3 soon.

Thanks.

Yao.