[U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image

[Hans de Goede]

Hi,

On 14-11-16 12:19, Hans de Goede wrote:
> Hi,
>
> On 08-11-16 17:21, Maxime Ripard wrote:
>> Introduce a new sunxi-spl-with-ecc.bin image with already the right header,
>> ECC, randomizer and padding for the BROM to be able to read it.
>>
>> It needs to be flashed using a raw access to the NAND so that the
>> controller doesn't change a thing to it, since we already have all the
>> right parameters.
>>
>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>
> Looks good to me:
>
> Reviewed-by: Hans de Goede <hdegoede at redhat.com>

Scrap that, this causes all sunxi boars to fail to build:

+--page is missing
+sunxi-nand-image-builder 2016.11-rc3-00069-gabe4d57
+Usage: sunxi-nand-image-builder [OPTIONS] source-image output-image
+Creates a raw NAND image that can be read by the sunxi NAND controller.
+-h               --help               Display this help and exit
+-c <str>/<step>  --ecc=<str>/<step>   ECC config (strength/step-size)
+-p <size>        --page=<size>        Page size
+-o <size>        --oob=<size>         OOB size
+-u <size>        --usable=<size>      Usable page size
+-e <size>        --eraseblock=<size>  Erase block size
+-b               --boot0              Build a boot0 image.
+-s               --scramble           Scramble data
+  Valid ECC strengths: 16, 24, 28, 32, 40, 48, 56, 60 and 64
+  Valid ECC step size: 512 and 1024
+If you are building a boot0 image, you'll have specify extra options.
+These options should be chosen based on the layouts described here:
+  http://linux-sunxi.org/NAND#More_information_on_BROM_NAND
+  --usable should be assigned the 'Hardware page' value
+  --ecc should be assigned the 'ECC capacity'/'ECC page' values
+  --usable should be smaller than --page
+The --address option is only required for non-boot0 images that are
+meant to be programmed at a non eraseblock aligned offset.
+Examples:
+  The H27UCG8T2BTR-BC NAND exposes
+  * 16k pages
+  * 1280 OOB bytes per page
+  * 4M eraseblocks
+  * requires data scrambling
+  * expects a minimum ECC of 40bits/1024bytes
+  A normal image can be generated with
+    sunxi-nand-image-builder -p 16384 -o 1280 -e 0x400000 -s -c 40/1024
+  A boot0 image can be generated with
+    sunxi-nand-image-builder -p 16384 -o 1280 -e 0x400000 -s -b -u 4096 -c 64/1024
+make[2]: *** [spl/sunxi-spl-with-ecc.bin] Error 255
+make[1]: *** [spl/u-boot-spl] Error 2

I've dropped this patch.


Regards,

Hans


>
> Regards,
>
> Hans
>
>
>
>> ---
>>  Makefile             |  3 +++
>>  scripts/Makefile.spl | 12 ++++++++++++
>>  2 files changed, 15 insertions(+), 0 deletions(-)
>>
>> diff --git a/Makefile b/Makefile
>> index 37cbcb28f75e..12a248e297b5 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -1345,6 +1345,9 @@ spl/u-boot-spl: tools prepare \
>>  spl/sunxi-spl.bin: spl/u-boot-spl
>>      @:
>>
>> +spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
>> +    @:
>> +
>>  spl/u-boot-spl.sfp: spl/u-boot-spl
>>      @:
>>
>> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
>> index e0b0117dc9b6..b41b4e427cc5 100644
>> --- a/scripts/Makefile.spl
>> +++ b/scripts/Makefile.spl
>> @@ -168,6 +168,7 @@ endif
>>
>>  ifdef CONFIG_ARCH_SUNXI
>>  ALL-y    += $(obj)/sunxi-spl.bin
>> +ALL-y    += $(obj)/sunxi-spl-with-ecc.bin
>>  endif
>>
>>  ifeq ($(CONFIG_SYS_SOC),"at91")
>> @@ -276,6 +277,17 @@ cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
>>  $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
>>      $(call if_changed,mksunxiboot)
>>
>> +quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
>> +cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
>> +                -c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
>> +                -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
>> +                -o $(CONFIG_SYS_NAND_OOBSIZE) \
>> +                -u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
>> +                -e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
>> +                -s -b $< $@
>> +$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
>> +    $(call if_changed,sunxi_spl_image_builder)
>> +
>>  # Rule to link u-boot-spl
>>  # May be overridden by arch/$(ARCH)/config.mk
>>  quiet_cmd_u-boot-spl ?= LD      $@
>>