[U-Boot] [PATCH v5 04/21] sf: Cleanup spi_flash_info{}

Jagan Teki jagan at openedev.com
Tue Nov 15 08:45:17 CET 2016


On Sat, Nov 5, 2016 at 9:37 PM, Simon Glass <sjg at chromium.org> wrote:
> Hi Jagan,
>
> On 30 October 2016 at 11:46, Jagan Teki <jagan at openedev.com> wrote:
>> - Proper tabs spaces
>> - Removed unnecessary
>> - Added meaningful comments
>>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Bin Meng <bmeng.cn at gmail.com>
>> Cc: York Sun <york.sun at nxp.com>
>> Cc: Vignesh R <vigneshr at ti.com>
>> Cc: Mugunthan V N <mugunthanvnm at ti.com>
>> Cc: Michal Simek <michal.simek at xilinx.com>
>> Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
>> Signed-off-by: Jagan Teki <jagan at openedev.com>
>> ---
>>  drivers/mtd/spi/sf_internal.h | 22 ++++++++--------------
>>  1 file changed, 8 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
>> index a9455ac..71feba9 100644
>> --- a/drivers/mtd/spi/sf_internal.h
>> +++ b/drivers/mtd/spi/sf_internal.h
>> @@ -108,17 +108,8 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
>>  #define JEDEC_ID(info)         (((info)->id[1]) << 8 | ((info)->id[2]))
>>  #define JEDEC_EXT(info)                (((info)->id[3]) << 8 | ((info)->id[4]))
>>
>> -/**
>> - * struct spi_flash_info - SPI/QSPI flash device params structure
>> - *
>> - * @name:              Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
>> - * @sector_size:       Isn't necessarily a sector size from vendor,
>> - *                     the size listed here is what works with CMD_ERASE_64K
>> - * @nr_sectors:                No.of sectors on this device
>> - * @flags:             Important param, for flash specific behaviour
>
> Why remove these comments? For 'flags' it would be good to point to
> the enum / #define that describes its values.

Added comments inside the structure in-place where members defined and
will update comment for name.
For flags will add the comments for respective macros in future patch.

>
>> - */
>>  struct spi_flash_info {
>> -       const char *name;
>> +       const char      *name;
>>
>>         /*
>>          * This array stores the ID bytes.
>> @@ -128,12 +119,15 @@ struct spi_flash_info {
>>         u8              id[5];
>>         u8              id_len;
>>
>> -       u32 sector_size;
>> -       u32 nr_sectors;
>> +       /* The size listed here is what works with SPINOR_OP_SE, which isn't
>
> /*
>  * The size

Will fix this.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.


More information about the U-Boot mailing list