[U-Boot] [PATCH v2 60/63] x86: link: Set up device tree for SPL
Simon Glass
sjg at chromium.org
Sat Nov 19 21:25:49 CET 2016
Add the correct pre-relocation tag so that the required device tree nodes
are present in the SPL device tree.
On x86 it doesn't make a lot of sense to have a separate SPL device tree.
Since everything is in the same ROM we might as well just use the main
device tree in both SPL and U-Boot proper. But we haven't implemented that,
so this is a good first step.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/x86/dts/chromebook_link.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts
index b932340..fab919a 100644
--- a/arch/x86/dts/chromebook_link.dts
+++ b/arch/x86/dts/chromebook_link.dts
@@ -26,12 +26,14 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ u-boot,dm-pre-reloc;
cpu at 0 {
device_type = "cpu";
compatible = "intel,core-gen3";
reg = <0>;
intel,apic-id = <0>;
+ u-boot,dm-pre-reloc;
};
cpu at 1 {
@@ -39,6 +41,7 @@
compatible = "intel,core-gen3";
reg = <1>;
intel,apic-id = <1>;
+ u-boot,dm-pre-reloc;
};
cpu at 2 {
@@ -46,6 +49,7 @@
compatible = "intel,core-gen3";
reg = <2>;
intel,apic-id = <2>;
+ u-boot,dm-pre-reloc;
};
cpu at 3 {
@@ -53,6 +57,7 @@
compatible = "intel,core-gen3";
reg = <3>;
intel,apic-id = <3>;
+ u-boot,dm-pre-reloc;
};
};
@@ -229,14 +234,16 @@
northbridge at 0,0 {
reg = <0x00000000 0 0 0 0>;
+ u-boot,dm-pre-reloc;
compatible = "intel,bd82x6x-northbridge";
board-id-gpios = <&gpio_b 9 0>, <&gpio_b 10 0>,
<&gpio_b 11 0>, <&gpio_a 10 0>;
- u-boot,dm-pre-reloc;
spd {
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <0>;
elpida_4Gb_1600_x16 {
+ u-boot,dm-pre-reloc;
reg = <0>;
data = [92 10 0b 03 04 19 02 02
03 52 01 08 0a 00 fe 00
@@ -272,6 +279,7 @@
00 00 00 00 00 00 00 00];
};
samsung_4Gb_1600_1.35v_x16 {
+ u-boot,dm-pre-reloc;
reg = <1>;
data = [92 11 0b 03 04 19 02 02
03 11 01 08 0a 00 fe 00
@@ -391,9 +399,11 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
+ u-boot,dm-pre-reloc;
spi-flash at 0 {
#size-cells = <1>;
#address-cells = <1>;
+ u-boot,dm-pre-reloc;
reg = <0>;
compatible = "winbond,w25q64",
"spi-flash";
@@ -401,6 +411,7 @@
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x003e0000 0x00010000>;
+ u-boot,dm-pre-reloc;
};
};
};
@@ -478,7 +489,9 @@
};
microcode {
+ u-boot,dm-pre-reloc;
update at 0 {
+ u-boot,dm-pre-reloc;
#include "microcode/m12306a9_0000001b.dtsi"
};
};
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list