[U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model.
Maxim Sloyko
maxims at google.com
Wed Nov 23 17:40:46 CET 2016
Sorry, this was by mistake, please ignore.
On Wed, Nov 23, 2016 at 4:28 AM, Heiko Schocher <hs at denx.de> wrote:
> Hello Maxim,
>
> Am 23.11.2016 um 00:56 schrieb maxims at google.com:
>
>> From: Maxim Sloyko <maxims at google.com>
>>
>> This series of patches is only meant for openbmc/u-boot tree.
>>
>
> If this series is not for U-Boot mainline, why do you post this patches
> on the U-Boot Mailinglist?
>
> bye,
> Heiko
>
>> It adds basic support for aspeed i2c. Only single master
>> mode is supported with synchronous transfer.
>>
>> The style is inconsistent with U-Boot style guide in few places,
>> but follows local style in those files.
>>
>> Maxim Sloyko (5):
>> aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include
>> file), plus minimal device tree configuration for ast2500 eval
>> board.
>> aspeed: Fixed incosistency in some SCU registers naming.
>> aspeed: Added function to calculate APB Clock frequency.
>> aspeed: Added function to configure pins for I2C devices.
>> aspeed: I2C driver.
>>
>> arch/arm/dts/Makefile | 2 +
>> arch/arm/dts/aspeed-g5-evb.dts | 28 +
>> arch/arm/dts/aspeed-g5.dtsi | 1278
>> +++++++++++++++++++++++++++
>> arch/arm/include/asm/arch-aspeed/ast_scu.h | 6 +
>> arch/arm/include/asm/arch-aspeed/regs-scu.h | 73 +-
>> arch/arm/mach-aspeed/ast-scu.c | 41 +-
>> drivers/i2c/Kconfig | 7 +
>> drivers/i2c/Makefile | 1 +
>> drivers/i2c/ast_i2c.c | 305 +++++++
>> drivers/i2c/ast_i2c.h | 143 +++
>> 10 files changed, 1851 insertions(+), 33 deletions(-)
>> create mode 100644 arch/arm/dts/aspeed-g5-evb.dts
>> create mode 100644 arch/arm/dts/aspeed-g5.dtsi
>> create mode 100644 drivers/i2c/ast_i2c.c
>> create mode 100644 drivers/i2c/ast_i2c.h
>>
>> --
>> 2.8.0.rc3.226.g39d4020
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>
--
*M*axim *S*loyko
More information about the U-Boot
mailing list